Everything posted by NJdiverTony
-
Completed my new build! :)
Federal XM855 62gr
-
Completed my new build! :)
Hey dude, no problem: https://www.primaryarms.com/Primary_Arms_MultiReticle_Red_Dot_Sight_p/pam3m.htm
-
Completed my new build! :)
I checked and the red dot was nice and tight. I was shooting off a bench and had a bipod on my rifle. Again, I was shooting through a 3 ft wide dark tunnel that is 100 yrds long... Only the shooting position and the target all the way on the other side is lit up. So maybe that had something to do with the red dot covering up the target (maybe the dot was too bright through the dark tunnel?)? It's a 2 MOA red dot sight, but through that tunnel, the 12" target looked just a hair larger than the red dot itself. Maybe it would have been better if I was shooting outdoors?
-
Completed my new build! :)
Don't have a choice at SCFGPA... The rilfe range is only 100 yrds. I don't have access to another range at the moment.
-
S&W M&P .22 Handgun Review
Is this mag disconnect mod, for the GSG or for the M&P22? If it's possible to do on the M&P22 and won't cause any issues with the gun, I'd be inclined to do it.
-
Completed my new build! :)
Took my newly built AR out to the range this past weekend... The rifle worked flawlessly. Spent some time dialing in my BUIS and red dot... My clubs rifle range is a 100 yrd tube/tunnel that you shoot through, so it wasn't easy to be precise with the BUIS and Red Dot to hit the target. My target was a 12" rifle "splatter" target. At 100 yrds my red dot was almost the same size as the 12" target so it was tough to be precise... but once dialed in 90% of my shots were in the target and the other 10% were just outside the perimeter of the target. My eyes just aren't what they used to be for shooting 100+ yrds, so I'm thinking about maybe also purchasing at least a 3x scope to shoot at longer distances, as I want to be able to do some more precise shooting at those distances. I'd like to make those 10" or 12" groups shrink down to 1" or 2" groups if possible. Is this acceptable accuracy with a red dot @ 100 yrds? (Some of the extreme flyers were from when I was sighting in the sights)
-
Red Dawn
Red Dawn was an awesome movie... Definitely one of my favorites from that era.
-
S&W M&P .22 Handgun Review
12 round mags
-
S&W M&P .22 Handgun Review
Here are some pics (Crappy cell phone pics, sorry!): M&P22 next to my Beretta 92A1 for size comparison... As you can see, this is a full sized pistol:
-
S&W M&P .22 Handgun Review
Nick, Stupid stuff? Hmmm, it does have the magazine disconnect feature, so not sure if that's considered "Stupid"... it certainly doesn't bother me at all. It does have a "passive loaded chamber indicator" which allows you to visibly see if there is a round loaded in the chamber... I'd probably consider that a positive thing. It also has a thumb safety, which I probably won't use. It doesn't bother me at all, that it's there... but I most likely will not use it at all. I know some people don't like having a thumb safety, but I'm neutral on it. If I need to use it for any reason, it's good that it's there and I have the option to use it... but won't probably use it 95% of the time.
-
S&W M&P .22 Handgun Review
Yep, the slide locks back on the last shot.
-
S&W M&P .22 Handgun Review
Haha, I knew that was coming, Harry! No problem I'll put some up in a little while!
-
S&W M&P .22 Handgun Review
So, I finally got my permits last week and decided to get started on my first handgun purchases right away. I had originally planned on getting a Ruger Mark III Hunter, but my FFL wasn't able to find one for me in the timeframe that I wanted it in. After talking with my brother in law who is interested in this gun as well, and also because I'm thinking about purchasing an M&P in the 9mm flavor in the coming months, I decided to pick up a new M&P 22. I was able to get one locally the same day after picking up my permits, for a good price, so I decided to go with it. I wanted a .22 for fun/low cost plinking, and this gun seemed to fit the bill. So here are my opinions on it since I picked it up last Friday: Fit and Finish - A+ The gun looks great, and feels just like the 9mm version in your hand. The finish on it is perfect and everything on it works as smooth as butter. All moving parts on the gun seem to be fitted very well to each other and it was perfect right out of the box. S&W/Walther have just done an EXCELLENT job with this handgun!!! The only gripe that some might have with this gun is that it doesn't have interchangeable backstraps... but that wasn't a big deal for me as I found that it fits my hands just fine. The entire gun just seems to be very well made and feels solid in your hand. I'm impressed. Trigger - B The trigger on this gun is decent, but my experience is mainly with all metal guns with nice triggers (1911, Beretta 92, etc). I noticed that it was a little gritty at first, but after putting about 200 rounds through her at the range the trigger improved by a lot. It's definitely smoother now. I do have to get more used to the hinged trigger of the M&P, but it's not that big of a deal. I think that after more use and after breaking it in more, the trigger will get even better. I think once broken in, I might change it to a B+ or A-. Operation/Function - A+ I went to the range yesterday and put about 200 rounds through her without a single hiccup. I used CCI Mini-mags and also regular CCI .22LR ammo. I really preferred the Mini-Mags over the regular .22LR ammo, as it gave it a little more "oomph" and it felt like it cycled more quickly. WIth regular .22LR ammo, there was no recoil whatsoever... It's been a long time since I've shot a .22LR pistol so I had forgotten what soft shooters they are. Rapid fire was so much fun as there was barely any muzzle jump at all. I did have to spend a few minutes adjusting the front and rear sights just a little bit, as it was shooting a little bit high and left for me right out of the box... Once I made my adjustments I was dead on, on the bullseye. I started shooting from 7 yrds/21 ft, to get her sighted in, and then incrementally moved back to the 17 yrds/50 ft line. At 50 ft I had very nice tight 3" to 4" groups on the bullseye, so I was very happy with the performance of this little gun. I'm sure it's even more accurate in the hands of a better shooter than me. Ease of use/Takedown/Cleaning - A+ What can I say... Extremely simple to field strip and clean this pistol, and just as easy to put back together. Everything on the pistol is very intuitive and easy to use. OVERALL, I'd give this handgun an "A"... and if the trigger improves with use, I'd probably upgrade that to an A+. I have to admit that at first I wasn't sure if I was making the right choice, espceially since I really wanted the Mark III (which I'm probably goign to eventually get anyway, LOL!)... but after spending some time field stripping it/cleaning it, becoming familiar with all it's parts and putting some rounds downrange and dialing it in.. I'm very happy with this purchase. It's a very fun gun to shoot and I think it's a great gun to practice your shooting technique with, without spending a fortune on ammo. Especially if you're planning on buying an M&P in the larger calibers (which I am planning on doing eventually). I didn't buy the gun to use as a trainer (but probably will use it in that capacity to a certain extent)... I bought it more for fun plinking and also for somethign that my wife will be more likely to shoot as she's recoil averse and doesn't like shooting my larger caliber handguns. She really likes shooting the .22LR round, so the M&P22 was a good choice. So, if anyone out there is contemplating purchasing this gun, my opinion (and only my opinion, I'm not a pro or anything) is that this is a great purchase and you won't regret it! I'm looking forward to having a lot of fun with this gun!
- Need some prayers
-
Dyson vacuum
My wife and I got a Dyson as a wedding gift when we got married about 7 yrs ago... and I remember at the time thinking "WTF, $500 for a vacuum??? That's insanse!!!" Well, after 7 years that vacuum has taken such a beating and it still works just as good as the day we got it and still has the same suction it had when it was new. I've totally abused it too... I've used it to suck up everthing from tons of spackle dust when I was doing work on my house, to just regular vacuuming of the carpets in the house and the thing is just a beast. After all that, I have to say that they are worth the money! Also, it doesn't use bags and they easy to maintain.
-
Bet you didn't now this about IBM
I agree that this is irrelevant... This happened a long time ago, and many things have happened in the world since then. I'm not an IBM sympathiser (I have dealt with IBM in my job for years and not a fan of the company), but what IBM is today has nothing to do with the IBM that existed during that time.
-
Virginia Repeals One-a-Month Handgun Purchase Limit
LOL, I think we posted basically the same thing at just about the same time...
-
Virginia Repeals One-a-Month Handgun Purchase Limit
Bloomberg is a a-hole and just needs to shut his trap... How does a gun purchased legally, by a law abiding citizen in another state, pose any threat to NYC? He makes no sense. It's illegal guns that he needs to be worrying about.
-
BB/pellet gun
Ughhh... Our state is so friggin stupid... We shouldn't even have to have discussions like these over a damn pellet gun! It's just ridiculous!!!
-
Completed my new build! :)
Thanks, I'll look into the XTM covers... I wasn't too crazy about the girth of these UTG rail covers anyway.
-
Completed my new build! :)
I know man... I'm feeling like a little kid on Christmas... can't stop drooling over my new toy.
-
Completed my new build! :)
Thanks guys. Yes, the Phantom brake came pinned/welded... and I blind pinned the stock already... so it's all NJ legal and legit. No need to neuter the bayo lug, as it's got a plain gas block instead of a front A2 tower.
-
Completed my new build! :)
Finally took some better pictures today... made them B&W so the details can be seen better.
-
Completed my new build! :)
Lower 1/3rd co-witness with the red dot...
-
Completed my new build! :)
Yeah, I've got some coming in the mail... I thought they'd be coming today but just checked tracking and won't be getting them until tomorrow now... The foregrip should be coming today though.