Everything posted by T1Defense
-
rifle bedding
Yea, doesn't matter if it's hunting or tactical. They're machined in the exact same way. It's just a difference in parts. Ie, hunting style stock vs a vertical tactical style stock. They all get bedded, chambered, threaded etc the same way.
-
Tier One Defense: I found a good gunsmith
Eric, thanks again for the kind words! More shooting and less typing lol
-
gun cleaning
don't over think cleaning. We only clean the barrel once accuracy starts falling off. Good ol hoppes is fine. once in a blue well use an ammonia based cleaner for fouled up barrels. btw, frog lube will freeze up during the winter months. I had frog lube in my bolt action and the bolt was ridiculously stiff. The action is a BAT tactical action.
-
Trying to decide on a bolt action .308
My vote is for a 700. Lots of room to upgrade with more parts readily accessible.
-
My Rem 700 .308 Build
Iggy, thanks for letting us build the rifle for you. We definitely look forward to future builds. Now go shoot that thing!
-
6.5 Creedmoor build, just done
Looks like it's under half a min. Thats good for me! Some more trigger time and you should see those groups shrink even more.
-
6.5 Creedmoor build, just done
Thanks again Eric. Enjoy!
-
Chopping and pinning AKs in North Jersey?
its quite easy to do it with the right tools while keeping the barrel attached to the trunnion. Remove your front sight. 1)hack barrel by any means 2)use piloted facing cutter 3)use piloted crown cutter (optional) 4)use piloted annular cutter to make sure the OD of your barrel is the correct size for your muzzle device. 5) thread muzzle with piloted threading tool and die with the correct pitch 6)slide front sight back on 7)put it where you want it 8)make a fixture or "eyeball" the front sight to make sure it's a TDC. 9)redrill your cross pin holes. The most difficult part of the would be drilling yoir cross pin holes. Without a fixture or a way to hold your front sight at TDC it could shift while drilling. Create a fixture or temp tig it somewhere inconspicuous. I've also used red loctite in the past.
-
Chopping and pinning AKs in North Jersey?
We won't chop it since it requires the barrel to be pressed off to be able to fit in our lathe. AR barrel and bolt gun barrels are different. We cut and thread them on our lathe. My suggestions is to contact rifle dynamics since they primarily deal with AKs, as we primarily deal with custom bolt guns and ARs. AKs require specific tooling which we have not bought ans/or made as of yet. The only service we're offering at the time for AKs is muzzle threads and pin/weld.
- My Remi 700 .308
-
Geisselle reaction rod
The brownells tool is all we use at our shop. You have to put flats on it or weld it to square stock. I've taken barrel nuts off that have broken those polymer upper holders.
-
Geisselle reaction rod
Just be aware that the brownells version does not have flats on it. I welded it to a piece of square bar stock so I can grab it in a vise.
-
finished up build
Mountainside. www.tieronedefense.com
-
finished up build
The biggest hit on the build is the action. As most custom actions are over a grand. This build came in at a little over 4K.
-
finished up build
Frank, It's a rail to put a forward mounted nv optic, whether it be standard nv of flir. It is bedded into the stock and the barrel floats thru it. It's called a Badger EFR. Thanks fellas!
-
Precision rifle/ Target
Customer build First 5 rounds from the freshly chambered pipe. First two on the right. Last three rounds on the left. First two and last three were from two different shooters.
-
finished up build
Got to finishing this build for a customer. This thing is going to be a laser once it's load is developed. BAT VR action, krieger barrel chambered in 243,bedded in a manners stock with ptg bottom metal. Barreled action was cerakoted mil spec green, while we gave the stock a woodland camo look. First 5 shots from the fresh barrel. First 2 were on the right. Last 3 on the left. First 2 rounds and the last 3 rounds were fired from different shooters.
-
Mildot-Master: It works
Freddy is a good dude, I've shot with him in a few matches.
-
What mode Remington 700 as a base rifle and a few other ???
175s and 178s with 44 grains of varget will make it to 1k with an 18.5 inch barreled 308.
- Magpul Stock for Remington 700 in .223?
- Magpul Stock for Remington 700 in .223?
-
What mode Remington 700 as a base rifle and a few other ???
Buy the action itself and gradually purchase the parts that you want.
-
best place to install muzzle brake
If you're talking about "installing muzzle brake" that includes cutting your barrel to desired length, threading and crowning it. For pinning and welding we charge $50. $50
-
best place to install muzzle brake
whats absurd?
-
remington 700 bolt knobs
Well be doing it in the future. As of right now, it'll be knobs and other machining jobs.