alec.mc

Sitting around bored today and pondering about a trigger job for my Ruger GP100 to improve the DA trigger pull. I've seen some youtube videos out there on what needs to be done, but I do not feel confident in my level of gunsmithing to take on this sort of project. Looking for either first hand experiences with those who have had a trigger job done on their gp100, or can recommend a local gunsmith in the central nj area that could do the job ( and while on that subject, what should I expect to pay ? ) Only gunsmith I am aware of in my area is @ NJ Firearms guild, I haven't heard any feedback on the mans work, and with the extremely inflated prices the store has to begin with, im not sure if NJFAG may be the best choice, thoughts? Thanks, Now im off to order a few hundred more rounds of 38spec. -Alec

I stop in there pretty often during the summer to pick up worms to go fishing, last I saw it was under some pretty heavy construction, but i had no idea for what. Hopefully this place will be good since It's about a mile or 2 from my house.

Hey Mike, Harry started a thread on this prepping people to go, might want to check it out, maybe the question was answered already, or you could ask there. But i THINK you can, just have to fill out two forms, and pay twice. http://njgunforums.com/forum/index.php?/topic/28759-obrpc-action-steel-saturday-1112/page__pid__377053__st__20#entry377053 See you there.

Thats a pretty impressive....... Technique looks like it would suffice for 10 and under targets, but you have to knock down, ..what? 50 targets ?

I think imma shoot the GP100 this time around, i THINK i have enough speed loaders. I think it'd be fun to watch the guys with the shotguns, Itd be interesting to see how fast reloading times are for those without them fancy speed loading tubes.

Im going to try to make this one as well, hopefully ! Graveyard shift sucks since Im pulling an " all nighter " to go to events... But for those who have the time, PPC is on friday night at the indoor range, and is a good event, imma try to get to that as well. Harry, Still impressed by the trigger on that CZ 75-TS of yours, any reason you went with the .40 over the 9 ? -alec

They prob belong to one of the Mikes, lol. ( 78% of the entire attendance is mike ) But I do believe they belong to ZOMBIE mike

Unlikely, You'll prob. have to wait till the following month to apply. The " application / orientation " is an verbal overview of the club, its history and the rules, followed by shooting 20 or so rounds off in the indoor range so that they can observe how safe you are with your firearm. Once that is done with and your happy with how everything is you cut them a check and they hand you a probationary ID badge and key card to enter the facilities.

Had a good time, good to put faces to the name. Need more practice. And...uh, the sun was in my eyes for the last one, yeaaa

Without seeing the system, my only advice is you probably have air in your lines, I wouldnt touch the expansion tank unless you are blowing your saftey. It's unlikely the expansion tank has anything to do with gurgling lines,unless of course the bladder burst, but i've never dealt with that. Pull off some covers on your baseboard heaters and look for bleeders, while the heat is running , unscrew the bleeders, you will hear air start to hiss out, once the air has stopped and water starts coming out, close the bleeder... do this on all the bleeders, and repeat as nessasary until the air is gone. edit: another way to test your expansion tank without draining down is by touching it while its running.... one end of the expansion tank will be hot, and the other will be much cooler.

x3, Woodbridge dicks didnt ask to see FID card, they did however lock the 12ga ammo up in a electronic security lock box for me to carry it downstairs to the main register, where they then unlocked it upon check out.

Im happy with my TLR-1 Light that I have mounted on my beretta m9a1. It's extremely bright, doesn't really off balance the gun, or feel to heavy at all,does not loosen up even after a few hundred rounds, and I feel they are reasonably priced right at 100 bucks( you could probably find it a bit cheaper if you search around ) http://www.amazon.com/Streamlight-69110-Mounted-Weapon-Flashlight/dp/B000JWD16E/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1319937673&sr=1-1

I lost a pretty large section of tree just before, landed right in near my front door, I dragged it out toward the front of the property near the side walk hoping that they will take it. It'll take me all damn day to cut that up and dispose it.

Manny, You are in woodbridge arent you? Why not consider Old bridge? Its about a 15 minute drive from my place in woodbridge to the range @ obrpc. Hell of alot closer than cj or cr 24/7 indoor range, large outdoor range. family can tag along with you.

Grainger does that crap all the time with advertising wrong prices. A while ago they listed a high end miller welder that typically goes for 1500$ or so, they had it listed at like 350 bucks or something, I ordered 2 ! ... a few days later i get a phone call explaining that it was a error in the listing and they will NOT be honoring their price, and canceled my order.

Excuse my lack of knowledge, but CQB? Im assuming close quarter......battle? bingo? boats? Thanks

vlad, do you feel that the optic being that far away from the users eye prohibits you in any way? as opposed to having it mounted above the dust cover. I have never used or seen one first hand, so I am not familiar with the optics features, but the first thing that pops into my head is that it seems really far away. How big is the optic opening with it shouldered? size of a quarter ? half dollar? Thanks.

Couldnt say, looks pretty cool though. But remember, we live in a state where you cant even buy a firecracker.

False advertising, I saw 2 guys in there.

Thanks for your knowledge glenn and vlad

Yeh, I do all my ordering from CSS, but they are out of stock on this one. AKM is differnt correct? looks to be the shorter one. Looks like everybody is out of stock on this one, or my google-fu is weak

Ive got a Saiga 7.62, Just ordered KVAR handgaurd set, and the lower retaining bracket. Im having a problem finding a gas tube that will fit my saiga that has the retainer bracket on it, the only ones I came across say they are 6" long , where as the stock tube on my saiga is about 7" Any advice on where I can find one online ( instock ) and if they are mostly universal to the saiga, alot of the ones i pull up have exemptions on make thanks

<---- newbie as well. I'll be bringing my beretta m9, and ruger mark2

Damn rubber neckers! Near what exit?

Thanks Harry, I THINK the Mark II and Mark III magazines are compatible. I have 4 mags, if 5 is required I'll need just one more. -Alec