alec.mc

Mike, I couldn't get inside the door , spent 5 hours standing outside. Though, I did speak in front of the crowd we had outside. Everybody shared a little piece of their mind.

jim norman of obrpc on !

Maks that you under " NJ GUN FoRms ?! " ???????

I was there, we spent 5 hours standing out in the cold because the building reached capacity and they wouldnt let anybody else in unless somebody came out and you took their place. We had a little mini rally of our own while outside, a speaker and microphone were brought out for those who wished to share stories, opinions, and their prepared speeches. From what I understood was going in side was a complete circus, they actually had the audicity to say - this is taking to long, we are going to sign off on everything and pass it, then you guys can talk..... COMPLETE WTF Kangaroo Court ! This was the OVERFLOW of people left outside in the cold after we filled up the main hearing room and 2 or 3 additional over flow rooms in the building..

I've been standing outside for the past 5 hours, we making some noise! Hope all is going well inside

Departure Site Address Departure Time Bus Captain Cell Number E-mail Atlantic City Park at the Atlantic City Rest Stop near Exit 41 of the GSP 7:00am Elliott Pirie 609-709-5215 [email protected] Bellevile 75 Rutgers Ave, Belleville 8:00am Jennifer Cerca Pantano 973-759-3968 [email protected] Bridgewater Duke Island Park, Old York Road, Bridgewater, NJParking Lot C 8:00am Richard Quinn 732-857-0228 [email protected] Cherry Ridge 100 Range Road Highland Lakes, NJ 07422 7:00 A.M Marjorie Kleiman 201-960-9008 [email protected] Cheesesequake Park at the Cheesequake rest area near exit 123 on the GSP 8:00am Robert Henn 732 429-8919 [email protected] Farmingdale 462 Squankum Yellowbrook Rd 8:00am Daniel Ritter 908 415 5582 [email protected] Forked River Fork River Rest Stop near Exit 76 GSP 8:00am Glenn Darwell 732-966-5535 [email protected] Montvalle Rest stop near EXIT 171 GSP 7:00am Mike Kukol 201-925-8225 [email protected] Winslow Bangers Sport Shop,840 Piney Hollow Road 7:00am William Dennys 856-889-5055 [email protected] Pine Brook, NJ 330 Changebridge Rd 8:00am Craig Vollmin 201-788-5043 [email protected]

I'll be on the cheesequake buss that leaves @ 8am

Dues were due back in January my man. Get in touch with the Treasure / Dues person for the club, pretty sure his name is Rich. -Alec

BlueLineFish is Joe too. But for you, if you want me to bring my mk2 mags send me a PM if you are gonna be there at the end of the week.

you gonna be there sunday joe?

What Message Harry?

over 300 people registered for the buses to appear tommorow morning ! That's like 8 people showing up in " News " Terms.

CALLING ALL REVOLVERS. DUST THEM BAD BOYS OFF AND COME SHOOT THIS COMING WEEKEND

I think some companies actually sell *NJ/CA/MA Compliant* variants of their product that are pre-nutered, though - I doubt you'll find anything right now to purchase.

White diamond. ,...... Mmmmmmmm

Plates vary from 8" circles to 18"x24" plates places between 7yards and 25 yards

They are.

Speed loaders are not completely required, i mean - you wont be able to do a reload if you run out of shots before hitting all 5 targets, but assuming you can hit what you are aiming at you'll have a few seconds in between " runs " to load up your cylinder. Of course, they do make things run alot smoother.

5 second head start

No problem, I'll probably be shooting my Mark 2 as well, so we'll have to squad together and share off them. -Alec

I'll give you a 4 second head start per stage raymond.

I've got some mark 2 mags I can lend you for the match. PM me if interested

listen to bob ^^^^^ the only thing i'll disagree with on that is that I put a little bit of lock tite on the front most screw that holds down the rear leaf, I had trouble with it loosening up firing major loads out of my 625, I would NOT reccomend putting any on the rear of the sight on the windage/elevation screws. -alec

like steve said, rimfire division is for .22, but you still might be able to compete in standard carbine division ( going up against 9mm/40/45 etc ) I'll need to see if they consider .17hm2 a " rifle " caliber, if so - it's prohibited for steel. edit: looks like .17 is on the prohibited list on the indoor range, I'm going to go ahead and assume it's prohibited on outdoor steel as well.