hd2000fxdl

I'll update about about the hole as soon as I get it, I just asked that question myself, I think so, but will confirm later today when I get a response back from the supplier. I'll also update the original post with that information also. Sorry for not having that information from the get go.

Got it for both Nick's, post 1 is updated already.

Clean Pan you got there.

You are good to go, even though it is not required by law and I will say when I transport on 1 of my bikes I will have it in a locked case. That would be my 83 kick only Shovel, there is really no place to put it other than a bag strapped to the seat and for that I will put it in a locked case. Now if I am on my 08 Ultra, well that bark-a-glide has lockable side bags and TP so I don;t worry about that, actually the party I rode down to in Louisiana earlier in the year I had 4 different HG's with me. Just transport as the exemption allows while inside the NJ state lines and under the rules of FOPA and your are good, if you have a CCW check the state laws for the sate you are going to and or traveling though as well as any deviations you may have and you will be good. Oh I hear you on the loud bikes, I do thing loud pipes save lives, but there is a right and wrong way to do that, I have never been pulled over for loud pipes and I have had some loud bikes, it all how you ride them as you probably already know. Just don't turn into this type of rider:

///// NO MORE ORDERS AT THIS TIME SEE POST # 218 FOR MORE INFO///// Ok folks I am glad I waited and I will give this about a week to run unless we just get hit with a big order but will have to wait and see. I copied the names from the other thread who were interested in picking up sets of steel, you all will have to let me know what and how many of each you are looking to get. THE LIST: Harry (HD2000FXDL) 5x8"=$150 & 3x6"=$60 TTL $210 w/Holes Harry (HD2000FXDL) 2x8"=$60 TTL $60 NO Holes Alec (Alec MC) 1x8"=$30 2x6"=40 2x4"=24 TTL $94 NO/Holes Ray (RayRay) 3x8"=$90 TTL $90 NO/Holes Kevin (SpecialK) 1x4"-$12 & 1x6"=$20 TTL $32 w/holes Nick (Futool) 1x8"=$30 & 1x12"=$76 TTL $106 w/Holes Rey (Hiker88) 2x8"=$60 TTL $60 w/Holes Bill (Bcoops) 5x8"=$150 TTL $150 w/Holes Nick (Krdshrk) 1x12"=$76 TTL $76 w/Holes Jimmy (JimmyAGR) 2x8"=$60 TTL $60 w/Holes Frank (AS350Driver) 2x8"=$60 TTL $60 w/Holes James (JVHEITZ) 4x4"=$48 4x6"=$80 4x8"=120 TTL $248 NO/Holes Mike (M4BGRINGO) 4x4"=$48 4x6"=$80 2x8"=60 2x12"=152 TTL 340 w/Holes Alan (Kpdpipes) 2x6"=$40 2x8"=$60 TTL $100 w/Holes Dan (Knuckle Sandwich) 2x12"=$152 TTL $ 152 w/Holes Neil (fastd) 2x8"=$60 TTL $60 w/Holes Don (Regulator72) 6x8"=$180 2x12"=$3322 TTL=$272 w/Holes Joe (Joltin'Joe) 2x6"=$40 TTL=$40 w/Holes Rich (TheSGM) 2x4"=$24 2x6"=$40 2x8"=$60 TTL=$124 w/Holes Drez(RecessedFilter) 1X12"=$76 TTL=$76 w/Holes Jim (Whamo) 3X8"=$90 1X6"=$20 TTL=$110 Mix HOles & No/Holes I'll replace the number of sets with quantity and size as I receive updates. I may be a little slow the few days being I'm in Steamboat Springs skiing with the OL but will do what I can. Now here are the sizes and price: All steel is AR500 1/2" and all are round targets and there is no price difference for the round so we oped to go with what was more standard. I personally like the round better and having a run of all the same will be easier. If interest was high enough for something else we can maybe see about the down the line but would like to just get the initial order going for now and feel out the process. 4" $12 6" $20 8" $30 10" $58 12" $76 The price of these are what it will cost with no delivery. All of the folks who are willing to meet at OBRPC or in Sayreville we can work something out and I'll just pick them up and deliver to save the coin of shipping. If anyone is out of the area I can check on pricing from the original supplier to ship them to your Zip-code, or I can see what would fit and if it's work out to under 70lbs and use flat rate shipping boxes from the USPS. If we can keep something similar to this format it would help me out, make it ease and cause the least amount of confusion: My order for myself at this time will be the following 8" QTY 5 = $150 6" QTY 3 = $ 60 TTL $210 No Shipping needed if shipping was needed I would say need shipping and zip-code is 00001 Only reason I ask for zip-code is if I can get a better deal on shipping than the flat-rate USPS service, again, only for people I won't be meeting at OBRPC or in and around the Sayreville area. Last note: I have been told the lead time from money paid to the supplier to being complete is approximately 1 week, give or take a day or 2 depending on where weekends fall from when the order is put in. I think thats it, if I missed anything, let me know as I know you all will... They should have 2 holes cut into them as shown in the following picture, I did inquire about being able to have an option of no holes, that can be done, however it will be a pain in the butt to only have 1 plate with no hole, now if anyone wants a multiple plates or a few people want them with no holes that can be done. Toss out your thoughts on how many you would like with NO holes and we can see what the total is. I won't make any final decisions or final orders until we are all good with what we want.

Now sure of the wording they used but I would think it would be real hard to get a question like that out that didn't violate the law.

http://wimp.com/tiniestengine/

We all know those cute little computer symbols called 'emoticons,' where : means a smile and is a frown. Sometimes these are represented by :-) :-( Well, how about some 'ASSICONS?' Here goes: (_!_) a regular a** (__!__) a fat a** (!) a tight a** (_*_) an a** hole {_!_} a swishy a** (_o_) an a** that's been around (_x_) kiss my a** (_X_) leave my a** alone (_zzz_) a tired a** (_E=mc2_) a smart a** (_$_) Money coming out of his a** (_?_) Dumb a**

Yea, me too, I grew up in Woodbridge Twp and remember the old place but from over 25 years ago not the stolen gun dealing place.

No pricing on the Website, usually if you have to ask...... Tony, can you ballpark the cost for them??

It's a nice gun and who doesn't like a 1911. Some people had problems with the factory guide rod, but I didn't chance it breaking and just replaced if the day I got it with a CW accessories steel one. I changed a few other things but not because it was needed, just something I wanted to do.

Lets see, it looks like you will get off well being there doesn't seem to be any electronics or other stuff built into the bumper. I say a quick guess is they will repair it and not call it a total loss. Quick guess for cost, $1800 - $2000 Thats assuming no bags were blown.

By the way, if your looking for one, you might want to try the price checker here on the forum. The price in your link is high, you could probably get close to that out the door with NICS and tax locally.

I'll second what Jon said, lighting can do strange things. I would consider the color if it was available but only with matching grips, other than that I like the wood and black combo.

Nice, that made for a quick day of hunting.

I would just shoot it and be done with it, you can go a step further and check it out further if you like. Get the calipers out and see how it measures up..

Looks great Tony, after seeing how nice and clean it got all the parts I just might have to pick up one of them ultrasonic cleaners, not for normal cleaning but that once a year full tear-down cleaning. I can even play it off as I am getting something the OL can use for her Jewelry.

I am not sure if it was this past weekend or this up coming but I think there was mention of one out in York PA..

Welcome to the forum, and who doesn't like a 1911??

I have it good, both the normal UPS and FedEx guys shoot and/or hunt so they have no problem with ammo orders, or any other order I have delivered up to the heaviest that was 6 spam cans of 7.62X54R. My USPS guy knows I shoot and I have no problems, and has jokingly said something to that effect. Only 1 time when he had a injured back did I have to go pick up and 2K order of .40 bullets from Delta Precision.

What grain are the WWB, we can see the USA is 115gr, and that 1 picture sure make them look a lot different in diameter, but the height, OAL may new be a problem at all, being they probably use a different powder and or gr bullet.

Welcome to the forum, have at least 1 other person from South River and a bunch of us just across the bridge in Sayreville. OBRPC is great, nice facilities, both indoor and outdoor and plenty of activities, save up for ammo, guns are cheap when you look at it.

You can check the websites as well as goggle maps, may not be up to date but it will give you an idea. Another thing is look at the competition folder and you will see many videos of the matches take by forum members. That should get you a good idea until someone posts some here.

Welcome to the forum, keep the rubber side down..