///// NO MORE ORDERS AT THIS TIME SEE POST # 218 FOR MORE INFO/////

 

Ok folks I am glad I waited and I will give this about a week to run unless we just get hit with a big order but will have to wait and see.

 

I copied the names from the other thread who were interested in picking up sets of steel, you all will have to let me know what and how many of each you are looking to get.

 

THE LIST:

 

Harry (HD2000FXDL) 5x8"=$150 & 3x6"=$60 TTL $210 w/Holes

Harry (HD2000FXDL) 2x8"=$60 TTL $60 NO Holes

Alec (Alec MC) 1x8"=$30 2x6"=40 2x4"=24 TTL $94 NO/Holes

Ray (RayRay) 3x8"=$90 TTL $90 NO/Holes

Kevin (SpecialK) 1x4"-$12 & 1x6"=$20 TTL $32 w/holes

Nick (Futool) 1x8"=$30 & 1x12"=$76 TTL $106 w/Holes

Rey (Hiker88) 2x8"=$60 TTL $60 w/Holes

Bill (Bcoops) 5x8"=$150 TTL $150 w/Holes

Nick (Krdshrk) 1x12"=$76 TTL $76 w/Holes

Jimmy (JimmyAGR) 2x8"=$60 TTL $60 w/Holes

Frank (AS350Driver) 2x8"=$60 TTL $60 w/Holes

James (JVHEITZ) 4x4"=$48 4x6"=$80 4x8"=120 TTL $248 NO/Holes

Mike (M4BGRINGO) 4x4"=$48 4x6"=$80 2x8"=60 2x12"=152 TTL 340 w/Holes

Alan (Kpdpipes) 2x6"=$40 2x8"=$60 TTL $100 w/Holes

Dan (Knuckle Sandwich) 2x12"=$152 TTL $ 152 w/Holes

Neil (fastd) 2x8"=$60 TTL $60 w/Holes

Don (Regulator72) 6x8"=$180 2x12"=$3322 TTL=$272 w/Holes

Joe (Joltin'Joe) 2x6"=$40 TTL=$40 w/Holes

 

Rich (TheSGM) 2x4"=$24 2x6"=$40 2x8"=$60 TTL=$124 w/Holes

Drez(RecessedFilter) 1X12"=$76 TTL=$76 w/Holes

Jim (Whamo) 3X8"=$90 1X6"=$20 TTL=$110 Mix HOles & No/Holes

 

 

I'll replace the number of sets with quantity and size as I receive updates. I may be a little slow the few days being I'm in Steamboat Springs skiing with the OL but will do what I can.

 

Now here are the sizes and price: All steel is AR500 1/2" and all are round targets and there is no price difference for the round so we oped to go with what was more standard. I personally like the round better and having a run of all the same will be easier. If interest was high enough for something else we can maybe see about the down the line but would like to just get the initial order going for now and feel out the process.

 

4" $12

6" $20

8" $30

10" $58

12" $76

 

The price of these are what it will cost with no delivery. All of the folks who are willing to meet at OBRPC or in Sayreville we can work something out and I'll just pick them up and deliver to save the coin of shipping. If anyone is out of the area I can check on pricing from the original supplier to ship them to your Zip-code, or I can see what would fit and if it's work out to under 70lbs and use flat rate shipping boxes from the USPS.

 

If we can keep something similar to this format it would help me out, make it ease and cause the least amount of confusion:

 

My order for myself at this time will be the following

 

8" QTY 5 = $150

6" QTY 3 = $ 60

 

TTL $210

 

No Shipping needed

if shipping was needed I would say need shipping and zip-code is 00001

 

 

Only reason I ask for zip-code is if I can get a better deal on shipping than the flat-rate USPS service, again, only for people I won't be meeting at OBRPC or in and around the Sayreville area.

 

Last note: I have been told the lead time from money paid to the supplier to being complete is approximately 1 week, give or take a day or 2 depending on where weekends fall from when the order is put in.

 

I think thats it, if I missed anything, let me know as I know you all will...

 

They should have 2 holes cut into them as shown in the following picture, I did inquire about being able to have an option of no holes, that can be done, however it will be a pain in the butt to only have 1 plate with no hole, now if anyone wants a multiple plates or a few people want them with no holes that can be done. Toss out your thoughts on how many you would like with NO holes and we can see what the total is. I won't make any final decisions or final orders until we are all good with what we want.

Change mine to 1x 12".

I'm in for

1x8" = 30

1x12" = 76

 

106 Total

Thanks for doing all this buddy!

Got it for both Nick's, post 1 is updated already.

Are these drilled or anything? Or just plain round plates?

Are these flat based, hanging, just round plates that we have to clamp... plates? Just wondeing what these are set up for to actaully shoot them.

I'll update about about the hole as soon as I get it, I just asked that question myself, I think so, but will confirm later today when I get a response back from the supplier. I'll also update the original post with that information also. Sorry for not having that information from the get go.

Harry,

 

Add me for the following:

 

8" QTY 5 = $150

 

Let me know when/where to drop off the cash.

 

Pick up in OB or Sayreville

 

Thanks,

 

Coop

I wish I had some place to shoot steel so I could go in on this good deal.

PM sent to Harold

Harry,

 

Add me for the following:

 

8" QTY 5 = $150

 

Let me know when/where to drop off the cash.

 

Pick up in OB or Sayreville

 

Thanks,

 

Coop

 

Got it man, original post updated. Back to the ski slopes.

Harry,

 

who is the supplier? I might be interested if there is no holes drilled. I prefer to just have something welded on for my use.

I wish I had some place to shoot steel so I could go in on this good deal.

 

C'mon down to OBRPC or Range 14.

You mean shoot in the pits at OBRPC Nick?

 

C'mon down to OBRPC or Range 14.

Original post updated with what the plate should look like with the holes cut into them. Will also update about being able to order with no holes when I know, not sure it that will complicate the order too much but I have asked if that may be available.

Easton fish & game allows steel

Original post updated, There is an option of not having holes as long as we get an order of more than just 1 or 2 plates with no holes. So if you don't want holes let me know and I'll keep track and see if that is an viable option when it is all said and done.

 

So the options would be as listed in the first post, 2 holes and shown. or NO Holes if we have enough interest. Again, I will not be placing an order until we all know exactly what we want and are all happy with the order.

Harry - please put me in for 2 - 8" plates (with holes) for $ 60.00. I can pick-up either in Sayreville or OBRPC.

 

Thanks!

 

Rey

I'm ok with the holes. Will use those for mounting.

I updated the original post with w/Holes assuming everyone who has said what they wanted plates as of now wants holes. If you don't want holes let me know and I will make the necessary changes.

Updated to add Kevin's order.

2 10" please harold. Gracias papi

Harry I would like two 8 inch with holes. I can pick them up from you. Please let me know how/where to send the money.

2 10" please harold. Gracias papi

 

De nada Raymond

Harry, Change my order to:

 

Two 12" plates

 

and

 

Two 8" Plates

 

76+76+30+30=$212

Harry I would like two 8 inch with holes. I can pick them up from you. Please let me know how/where to send the money.

 

Got ya Jimmy, will update on how we do the money next week when I get back to town.

Harry, Change my order to:

 

Two 12" plates

 

and

 

Two 8" Plates

 

76+76+30+30=$212

 

Like Prego., it's in there..

De nada Raymond

 

No holes

What do I owe you?

I dont need holes either harry.

If it's not too late i'll take a couple.

 

2 8 inch plates= $60

no delivery required, holes are ok.