Everything posted by M4BGRINGO
-
AR 500 Steel Buy
Harry, I missed the mail today, but the check is sitting in the box, you should have it by Friday. I will PM you my address just to make sure you have it.
-
Obrpc Uspsa December Classifier
Someone must have added wrong! I know there was a screw-up on the stage that had the knockdown steel. While I did hit everything somehow they had my time around 7 seconds or something crazy like that! No way did I do that entire stage that quick. I bet you it took 7 seconds to shoot through that tube at the steel! Takes me a few seonds just to unload and reload the moonclips.
- Have You Forgotten About Guns You Own?
-
How Many Of You Own Multiple Different Guns In The Same Caliber?
Not enough! One .38 Special, that's all the little gun handles. Several .357 Magnums. Have a 1911 (.45 ACP) and a 625, get to share the same ammo. Have a 96FS (.40 cal) and a 610, get to share the same ammo. Have a 92FS but not going to buy a 9mm revolver, they want more than they're worth. Going to buy a carbine that uses one of the "common" rounds, 9mm, .40 or .45, haven't decided which yet. Only need it for the times I can't use the AK's at outdoor matches. Forgot: Lot's of 12 gauges!
-
Obrpc Uspsa December Classifier
I did an indoor shoot at OB last week, is was a USPSA match, we had four stages. I think they said the last stage, maybe last two, were qualifiers (classifier, new to these terms), but had no clue what they meant, I was just there to shoot! Eric and Vlad were running it. I do not have a USPSA number. Another guy named Mike was also using a revolver that night (just him and I were) and he showed me his card with his # and all the classes he had classifications for. What is on the 18th? Is it knockdown steel where we stand in one spot or is it run and gun or is it that other thing where you shoot several steel targets a few times in a row to see your best time? Damn, too many different types of shoooooooting to do!
-
Obrpc Uspsa December Classifier
What is a classifier? Do you need to do this prior to shooting in a USPSA match? Was thinking of trying one of these matches next year, what is needed to do prior?
-
Fun Car Poll - How Long Do You Keep 'em?
Sounds like me! I have a bunch of cars/trucks. Depending on what needs to be done to them I either do it or have a local friend of the family do it. I spend enough time with maintaining two race cars, the street stuff is a PITA to work on for the most part!
-
357 Revolver Poll
686, have two of them. Also have a 625, but it is .45ACP, I know the 625 was also chambered for the .45 Colt, did not know it was chambered for the .357 though. Colts are nice but too much money and become safe queens. The Ruger just doesn't fit my hand as well as the S&W.
-
AR 500 Steel Buy
I'm always late to the party. Harry, PM me your address and I will send you a check. Mike.
-
44 magnum shooters?
I have not shot any Rugers so I can't awnswer that one for you. I have never shot .357 from a 4" barrel either, only 6" and 8 3/8". The .357 Magnum did have less recoil than the .44 Magnum. I didn't think there was a huge difference between the two round though. There certainly is a HUGE difference between .38 Wadcutters and .357 Magnums though!
-
44 magnum shooters?
Thanks for the info Bob. The wifey keeps asking me what I want for Christmas. I told her a .460 XVR and some different grips for our other revolvers. Pretty sure the .460 is a no-go, but I tried. I'll check around and start looking at different grips. I can always wear one of my racing gloves, but that kinda defeats the purpose of those hot rounds.
-
Rem 870 question
The only way the smile will leave my face is when I run out of AMMO! May screw-up my tennis game for awhile, but I'mm willing to try! My Mosin bothered me a wee little bit after awhile with that stupid steel back plate. Funny that the Russians (and whoever else got to use those guns) had to deal with that. Guess they were young enough to handle it, I'm not.
-
OBRPC Indoor Action Shoot tonight
Those two boys and their father are all good shooters. I have shot with them at OBRAMS (.22 rimfire outdoors run on Saturdays). I bet they also shoot the Thursday night indoor rimfire event. I'm impressed watching them both using handguns at that age, heck, even my wife doesn't like the kick of her 92FS and one (or both) of those boys was using a PX4!
-
Just wondering how much you pay...
I am one. South River is pretty reasonable for us cheap guys with the 100+ year old houses and no land! My parents in Millstone Twp where I grew-up, well, that is a whole 'nother story............. I couldn't afford to live there, that is why I left and came here.
-
OBRPC Indoor Action Shoot tonight
I'm bad with names. Who was the fella shooting in Open with the ported gun, red dot sight, shooting .38 Super? That gun was hilarious. Did a good job cleaning the ceiling with that ported barrel! He sounded like a machine gun he was shooting so darn fast. I held-up the rear with my revolver. Eric was cool. I had an "oops" on my last shot of the night. I did hit the target, but he knew that I didn't mean to shoot at it when I did. He talked to me about what happened, that was fine with me. Not a DQ thing, but easily could have lead to one. Shooting weak-hand unsupported is not an easy thing and something most probably do not practice. I only do that in the PPC event, and have only shot that one a few times.
-
OBRPC Indoor Action Shoot tonight
It was too warm actually........... It was fun. Eric and Vlad were great, they made sure that the two newbies (me being one of them) knew what to do and what not to do. Vlad was pretty funny! I had met him at an outdoor event I had watched earlier this year. I had not shot this particular event before, but is was very similar to other outdoor stuff I have done. I will certainly be doing this event again.
-
AR 500 Steel Buy
Bueno! Then put me down for the following: 4 x 4" = $48 4 x 6" = $80 2 x 8" = $60 2 x 12" = $152 Total = $340 I can get them at OBRPC or Sayreville, doesn't matter to me. You can put the holes in mine.
-
44 magnum shooters?
Bob, here is a picture of some of the S&W's, I guess I have both types of frames, round and square butts. Now, the middle gun is the 629. What do you think of the wood grips with the larger finger grooves? I was tempted to try a set to see what they are like. There are SO many companies out there making grips. I don't feel like buying a bunch of sets to see what is good/bad, but I guess it is certainly a personal opinion on what we like. Anything you can recommend to look at and what to stay away from? My wife doesn't mind shooting the .357 Magnum round in the shorter 686, but she does have to wear a glove. That backstrap bothers her hand, well, the whole gun kicking bothers her hand. I know she won't like the .44 Magnum, but it doesn't matter, she is addicted to .38 Wadcutters anyway!
-
AR 500 Steel Buy
Harry, any idea of what caliber of round these can handle? Lemme know and then I will post what I want. Hopefully they can take a 7.62x54 round at 100 yards, that would be awesome! I would also like to use my little 7.62x39 rounds at 25 yards.
-
44 magnum shooters?
Ha, maybe I should post some and see what happens. I finally got a chance to take my 629 for a spin today. It is a 6" barrel so I was expecting a decent kick, but nope. While it does have more kick than my 686 with .357 Magnum, it isn't what I thought it would be. The recoil did not bother me a bit. The price of ammo does........ And so did the grips. It has rubber grips on it which were fine, but the metal along the backside comes-though and the bottom of that metal was whacking my palm. I was told the S&W 500 grips will fit the gun and cover that piece of metal. My 686's have the same metal there, but the metal is below the grips so we never feel it. Anyway, looks like I'll have to get some more permits so I can get a .460 now.
-
Unused Pistol Permits
I made my comment thinking you were being sarcastic. Most people from out of state (of New Jersey) like to poke fun at us and the stupid guns laws that we must follow. If you are being serious about never having seen one then be glad you don't have to deal with the crap that we do!
-
TRAP SHOTGUN
I agree with most of the above, except for the weight of different types of shotguns. My Browning O/U seems to weigh a lot less than my Rem 1100. I'll have to weight the three different shotguns we use for clays just to see, you have me curious now.
-
OBRPC Indoor Action Shoot tonight
Well, I met Mike who helps with the setup sometimes for this event at the outdoor range today. Guess I'll give it a "shot" with some of my revolvers tonight. He said it starts at 6:30. Normal ammo is what we will be using tonight.
-
Unused Pistol Permits
That's not very nice of you. We didn't vote these morons in and we try our best to vote the morons out, just can't seem to make it happen. We just to have to work within the system to stay out of jail.
-
OBRPC Indoor Action Shoot tonight
Sorry guys, got the two events mixed-up. I like shooting steel, guess I have to wait a little bit.