Everything posted by M4BGRINGO
-
Mosin Nagant Scope
Ok, found the magic firing pin depth checking tool. I had it set for .073", just short of their minimum of .075", pretty close. I checked my other rifle, it is at .077", just barely in-spec. I adjusted the newly modified rifle so it is at .080", middle of the road. I did find a LOT of sites devoted to the Mosin's. They explained the importance of setting the firing pin depth correctly. Too little, and it may not hit the primer enough to fire the round. Not the end of the world, but still not correct. Now, having the firing pin depth too great can cause real ugliness! According to what I read, the firing pin can puncture the primer too far and when the round actually fires some of that blast can come backwards shoving the firing pin backwards and the hot gases will be escaping pretty darn close to your eyes. Is it possible? Don't know and have no plan on learning if it can happen. Will post some pictures of the rifle tomorrow. Sorry Tim, made a Frankenstein out of one of the rifles, but it looks cool, sorta like a new Remmington 700.
-
Mosin Nagant Scope
John, I will have to look. I was just wondering what difference there really would be if the firing pin depth wasn't "exactly" correct. Tim, I left one of them unmolested. The plastic stock makes this old gun look like a brand new gun, plus the scope looks killer on it. Hopefully it still works after I took everything apart and put it back together. I bought a Mossberg and lemme tell you, the difference between that gun and my wifes Remmington 870 is night and day! Plastic certainly makes a gun feel "cheap".
-
Dick's East Hanover
In the Dicks EB store if I buy handgun ammo (which includes .410 shotgun shells) they need to see your FID card and log it into a book. No matter what ammo you buy they must escort you to the register. When I went to Cabellas in PA I really couldn't believe my eyes when I saw ALL their ammo sitting in the wide-open just waiting for someone to pick it up and buy it with no one looking-over your shoulder............... Sometimes "Free America" just seems so foreign to me....... Now, if someone was to sell anything between #7 1/2 and #9 for $6.00 a box with no shipping I wouldn't be going to Dicks anymore to buy it. Lemme tell you, 10 cases of that in their plastic shopping carts is tough to take corners, feels like the cart will come-apart!
-
Dick's East Hanover
I usually buy between 5 and 10 cases of Target Loads from my local Dicks Sporting Goods store in EB every few months. My wife and I do a LOT of Trap Shooting. The people working in the hunting section have always been nice to us. I think it is dumb that an employee must escort us to the checkout counter, but that's the way it is here in Commie NJ. One of my club members is also an employee there, bet he could tell us if their escorting is a NJ thing or simply a store policy.
-
CX4 Carbine Done...
I shot a friends 9mm version. While it has just a tad more kick than my baby Ruger 10/22 and was very accurate, I just didn't like it. Felt too much like a "toy" gun to me. It is light, very manuverable, but just not for me. Would be kinda cool if I could cut the gun off just behind the pistol grip. As a home defense type of weapon, I think it is very good for that. My FFL has one in .45 ACP sitting in the corner, no one is really interested in it. If I could get 15 round magazines for it, I would buy it!
-
The one that sleeps close to me...show me the one that sleeps close to you...
I think Jeremy has the same S/A that I have. Here's what sleeps next to me, besides the wife: With kids in the house there are no loaded guns, just the dogs. While they are doing their thing, I am getting out something to go greet an unwanted visitor with.
-
Homemade Target Stands
My base is made up of two T's and 4 90's, it is a square about 2' by 2'. My side posts are about 4 feet tall, connected at the top with two more 90's and a cross bar. I have the bottom glued together so it is easy to transport. The two side posts get slid-in when I set it up at the range. I'll try to get some pictures if it stops raining.
-
"I'll Take It" in the Marketplace
LOCK IT FAST TIM! :thsmiley_deadhorse: :thsmiley_deadhorse: :thsmiley_deadhorse: :thsmiley_deadhorse: :thsmiley_deadhorse: PS: Lemme know when you wanna sell more stuff, I bought a 686 but the wife never lets me use it!
-
Mosin Nagant Scope
Almost have the scope mount and bolt handle conversion finished. I had to take the firing pin out of the bolt. There was a line scribed in the end to line-up the screw with. How important is setting the depth of the firing pin? Too short and it won't hit the primer hard enough to fire the round? Too long and what happens? I should have measured it before I took it all apart, but I had no idea how the stuff worked. I have a second gun and measured that one, the two of them are very close, maybe .1mm different.
-
Thinking of driving to Cabellas to browse...
My Cabellas visit last week was on a whim. We went to the Lehigh Valley Trap/Skeet range first, Cabellas is a 1/2 hour West of that. Very neat place, but I don't see their prices as being anything spectacular. It is cool to see how the rest of "Free America" gets to shop though! It is also funny to see that they have you check your guns when you walk into the store. Certainly take the trip, but I would try to do it during the week, we did. It was still crowded. They have a heck of a selection of new and used long guns. New behind the counter and you will need one of their many people to help you with them (and their limited handgun selection), used are out on racks free to hold, just have to be 18 or older.
-
Homemade Target Stands
I made stands from PVC also, certainly nothing fancy. The bottoms are glued together, the two side posts slip in, the top brae ir glued together. I did this to make it easy to move and setup, and also if a piece somehow gets shot it is easy to replace in the field. I have cardboard that I zip-tie to the frame to staple the targets to. These are very cheap to make. Their biggest downfall is that they are so light the wind can knock them over! I take a 2x3 and lay it across the bottom of the two stands and that does the trick. I can take a picture if you want it. I may have $5 total into materials for each stand.
-
Dealers
I use Gunbroker a lot. My FFL laughs when I send him an email with a fax # to send his FFL info to. He said I must really love revolvers! He tries to locate me guns, he has a lot of contacts. He also does not mind one bit when I have stuff sent to him. He gets paid for the transfer, he doesn't do this for a living, but boy does he do a TON of transfers. He will also order me any new gun I want, as long as it is NJ-legal.
-
"I'll Take It" in the Marketplace
When I was new to this site I saw that Tim had a Remmington 1100 for sale. I told him I would take it plus PM'd him. I explained that I did not have an FID at the time and was expecting it shortly. Well, I had NO idea how long of a wait that was going to take. I did stay in contact with him, offered to give him a deposit or pay for it in full, until my FID arrived. I think it took 3 or 4 weeks from the time I told him I would buy it until the day I was finally able to go get it from him. He could have sold it to someone else. He didn't know me from Jack.......... He trusted me and my word, and I am glad he did! I have used that gun a LOT since I bought it from him. Sometimes things don't work-out as planned, but there are worse things in life to worry about.
-
OGAM now 33 Days?
I agree with Paul. I do try to plan-out purchases so I only have to pay for one NICS call at a time, instead of paying for the call one day, then come-back three days later for the handgun and pay for the call again.
-
OGAM now 33 Days?
Man, I am bad with dates, but isn't this still the year of 2011.................... That statement above is dated for 1/1/2012, what am I missing here?
-
One handgun a month
As long as you can trust the person you are buying the gun from, give him a deposit or pay for it in full, but get something in writing. I have had up to three handguns sitting in my FFL's safe waiting for permits. This state is pretty rediculous to deal with.
-
What's fun to shoot?
If you can do it, golf balls, tennis balls, fruit as mentioned above. I like to freeze water bottles and shoot them, cool to see them explode! Do the same with some fruit, I haven't tried that, but imagine it would be cool. (Pun intended) I also put food coloring in water bottles, funny to see them leaking out of two holes....... Buy a box of target clays. Dicks sells 90 for around $8.00, they are a blast to blow-apart. I go to our local club when no one is on the shotgun field and pickup old clays that are still mostly there. Free targets for 10 minutes of searching. If you guys think you are good shots then stick a marshmellow on a stick and try to hit it from 25 yards. With handguns that will be a challenging shot.
-
Employer Reference question
I am pretty sure I sent a copy of it to Pizza Bob to add to his on-going collection efforts.
-
Employer Reference question
My form was much more than "Are you employed". It was practically a third reference. Had several questions to fill-out, not a verification of employment at-all. Well, maybe sorta, simply because they sent this reference form to the employer which alone shows employment, but that is not what they were after.
-
Employer Reference question
I am self-employed and almost denied myself......... But seriously, what difference does it make if you work or not? Do all towns send employers this form? I know mine does. Is it the employers right to know an employee wishes to purchase firearms? What if the employee leaves that job for another, does the next employer need to be informed about the ownership of firearms? This is getting really rediculous living in this state! I do not understand the purpose of that form whatsoever. As a side note: I went to Cabells today with my wife and could not belive what we saw. Besides a beautiful store, sorta like walking through a museum, they had ALL their ammo sitting on shelves to be purchased. No ID needed at all, just pick it up and go to the register. No one writing-down your FID # in a book for handgun ammo. No one escorting you to a register with shotgun ammo. Had to have over 100 long guns on display to be held, only rule was you needed to be 18 or older, no store employee needed to hand them to you. New stuff behind the counter would be handed to you by an employee. Must have had 10 people working behind that counter today. Amazing what the rest of the "free country" takes for granted everyday.
-
beretta 96d
As far as I know, the 92 series is 9mm and the 96 series are .40 caliber. I have one of each myself.
-
Just made my first Gunbroker purchase
My FFL has had guns of mine sit for months at a time due to the 30 day rule, he never minds.
-
So, I am gonna apply for a ogam exempt buy
About to do this myself, hopefully it goes well.
-
how long of a wait do you really have to wait?
Lot's of topics on this subject around here, happy reading. Want some advice? Put $100 a week into an envelope while you wait for your permits. Go to places like Shore Shot and rent guns that interest you and shoot them, you'll find what you do and don't like. Have patience, it could take four weeks to one year, depends on where you live........... You'll be glad you put that money aside too.
-
Central Jersey or Old Bridge
Can you guest me in Dave and lemme try the 50 BMG? I know people at both, I am a member of Old Bridge since it is 5 minutes from my house. If I still lived in Millstone Township I would have joined Central Jersey. My favorite place to shoot Trap though is Citizens.