Everything posted by T Bill
-
Pacific reloading dies.. Not sure if I'm doing it right
Get a Lee Universal Depriming Die. Deprime, clean, then size, etc!
-
Pacific reloading dies.. Not sure if I'm doing it right
Pacific was bought out by Hornady in 1971. You are right today we use three dies, deprime/resize, expander, and seater. What your are saying is your expander die is depriming as well? You have to resize before you can measure and trim your case. I know of someone that would know about Pacific dies, but I will not be able to get in touch with him until the middle of next week. I'll ask and see what he says. I started reloading in the early 80's with Hornady equipment and the dies then were as stated above. OK here's and update. Check this PDF out. Pacific-Deluxe-Reloading-Dies.pdf
-
Proud dad in San Antonio
To Andy and Michael, congratulations. Do us all a favor, tell them that the NJGF community appreciates, commends, and thanks them for their dedication and service. Aim High ... Fly-Fight-Win
-
Inherited reloading equipment.. Nowhere to start.
US made primers are in the low $30's last I checked. For 223/556 55FMJ is the most popular in bulk with a COAL of 2.200. In 30 carbine 110FMJ or RN at 1.680.
-
smell of Mercaptans in south jersey?
It is found naturally in living organisms, including the human body, it is the byproduct of metabolism. Check yourself lately?
-
458 SOCOM
Five if your lucky, ten in a standard 30 round AR Magazine.
-
Private sale question
Just make sure his DL proves his identity as stated on the P2P. Complete as required. You give him his copy and you take the rest. You are required to mail the local issuing agency and NJSP copies to the addresses noted on the P2P within 5 days. Your responsibility is then complete. http://www.njsp.org/about/firearms-faqs.html See question #4
-
458 SOCOM
Old School you are correct. 458 SOCOM has not been SAAMI approved yet, so there are only a handful of heads designed for this round. Most are used for the 45-70. As it turns out there are a bunch of heads that perform with amazing accuracy in the 458, this 325FTX is one (at a much cheaper price point too!). Other 458ers are getting sub MOA with this configuration (.800 at 100 yards). Shocker, yes, all in the picture except the 22LR are handloads. The 458 performs best at this COAL for most. Wishing my ladders will prove likewise. Handloading the 458 brings the first round cost to about $36/box 20. Reloads will be about $15/box 20. Way better than the $60-70 box retail.
-
458 SOCOM
After waiting what seems like forever, the last of the parts have arrived for my 458 SOCOM build, both for reloading and the rifle. I thought a post a picture here showing the relative size of the ammunition to other rounds. The number of choices for heads for the 458 seem to increase by the month. From 100 to 500 grains. The one here is a Hornady 325 FTX. I have some Speer 400 SPFN yet to do and looking at some Lehigh Defense Controlled Fracturing. Estimated speed for this round is 1800 FPS. I'll post up the rifle when I finish it under new ARs. Nothing special sort of a plain jane, built for hogs in Florida again in late winter. Left to right. 22lr, 9MM, 45ACP, 55FMJ 223/556, 150FMJ 300BLK, 123FMJ 7.62x39, 325FTX 458 SOCOM.
-
lil gun vs H110
Thanks for the info, Medic. I never had that problem only using IVI and LC brass. I did try the LC blank brass and it works well if you anneal it, otherwise splits after a few reloads. Just not sure the effort is worth it. My IVI (Canadian) from '88 seems to hold up the best. I do not use PMags so maybe that's why I never had the problem. (Use D&H metal mags).
- lil gun vs H110
-
lil gun vs H110
Thanks for the information. I usually pick up my supplies either on-line or in PA. Recently also got lucky and got an 8 pounder of Lil' Gun. Hornady 125SST over 18.7 Lil' Gun gets 2000FPS. Follow safe reloading practices. YMMV on a 16" Carbine Or one of my favorites Hornady 208Amax over 14.5 AA1680 for 1400 FPS. For the smaller Hogzillas.
-
Advice
You don't have collision so you will have to go after his insurance for a damage claim. If he does not have insurance then you are out. Had this claim already. No collision my insurance company washed their hands of it. No insurance claim kicks in when he has none but you do for the damage.
-
lil gun vs H110
Lil' Gun along with H110/W296 (same powder) and AA1680 are all great powders for 300BLK. I have all four and find each has it's strengths with different weight and style bullets. I use mostly Hornady heads and I really like this caliber. I am working with Lil' Gun right now working up loads for a new addition for me, 458 SOCOM. Hornady's 9th edition has a lot of data for their heads in 300BLK.
-
A3764- Assembly Bill-- Requires successful completion of firearms education program to obtain initial firearms purchaser identification card and permi
How soon before Home Suppository and Blowes will need to schedule classes for permit holders of common contracting tools. I really am afraid of the thought that my neighbor may have an unregistered nail gun or worse. Stupid laws for stupid people. "You can't fix stupid"
-
Rabid Coyote Killed Bit Two People
And so it begins. I am all for wildlife but in the most densely populated state in the nation, some acceptable levels need to be maintained on certain species through effective hunting regulations. Both the bear and coyote seasons need to be expanded and seasonally adjusted. Current regulations are causing a lot of stress to both the wildlife and human populations.
-
Birthday Present finally arrived...
You name it, I probably reload it. In pistols, 9, 38, 357, 45, in rifles, 223, 300BLK, 7.62x39, 308, 30-06, 458SOCOM, are the most popular I do. 45 brass can be had from the classified on Brian Enos website. I have a couple other places to source also. One can never have too much 45 larger primer brass.
-
Birthday Present finally arrived...
Good Luck with the press and the load data. We should get together sometime and compare notes. Need anything LMK.
-
Anyone fly out of NYC airports with handgun recently?
I know of a internet FFL dealer that everytime you but a handgun from them, they ship it via Fedex ground to your FFL dealer. Violation of Fedex rules, but they keep doing it. I mentioned this before in another thread that I know of someone who breaks down his pistol, wraps it up and ships it to his neighbor in Florida. PIcks it up when he gets there. When he leaves in the spring, ships it to himself and gets it when he comes home. Been doing it for years no problem.
-
Anyone fly out of NYC airports with handgun recently?
Yes, ship it to yourself. See the BATFE frequently asked question #6 for info. http://www.atf.gov/files/firearms/industry/0501-firearms-top-10-qas.pdf
-
Help me decide between the shield or a 357 revolver
Ruger GP100 SS 6". By the time you can afford number two there will be something you like better than the Shield.
-
A3764- Assembly Bill-- Requires successful completion of firearms education program to obtain initial firearms purchaser identification card and permi
It's just the same. Compromising your 2A rights, one step at a time until ownership is a thing of the past. New Jersey will drown under its own laws one day. Sometime in the future, after we all here have passed, our grandchildren will wake up one day an realize they are no safer with the laws, than they were without. Sad state of affairs.
-
Grip Angle Similar to Ruger Mark series?
If I remember correctly the grip angle on the Mark series pistols is close to 25 degrees. Hopes this helps.
-
My New Colt
This is a Colt MT6601 made in 2007. You can make this into a CMP tack driver with just a few modifications. Add a free float assembly, change the front post and rear sight insert, add a two stage 4.5 trigger, a few tailored weights, and a sling. You would then have a modern NM "Garand", so to speak.
-
A Day at the Range (fyi-entertainment on a Monday Morning)
Just a little humor to start the week. I could use some.