Everything posted by T Bill
-
Xtreme bullets 10% off
Ditto, going to give some 9MM a try.
-
researching AR15s
If your budget is $1500 then you can do better than a S&W.
-
Is this a good price for .45 STI Spartan?
STI over S&W and Remington. Looks good to me.
-
question on private sales
A long rifle can be transported anywhere as long as it is in a "secure package". That can be from a locked gun case to wrapped and tied in a package.
-
To Check Headspace or Not.
Get a "field" gauge and use it. If it doesn't close on it your more than 90% sure your GTG. I mill a relief groove in it and then do not have to take the extractor out to check it. Use it all the time. Goes in the range bag just in case.
-
What did you get for xmas?
Count your blessing...Greatest present you could have gotten. I also agree, healthcare is out of control, now with the Gubberment involved, it will only get worse. Hell, even the Post Office is about to raise rates again.
-
Thoughts on what caused this FTF?
Not unusual. Probably deformed on feed because it got hung up on the way into the chamber. Managed to go in but never seated so bolt never went into battery. See if top of round has marks on it. Telltale sign. Just be glad it did not fire out of battery.
-
change things up: where did you learn to shoot?
Dad and Uncle started me in the sport. Went hunting with them as soon as old enough to carry (PA). Uncle had a 75ft 22/pellet range in basement of the family house (grandpa built it, he was a contractor). Spent hours down there with cousins shooting 22 shorts. Backstop was a steel plate angled into a sand trough. Used to sift out the 22 and pellet heads from the sand and put it in the smelting bucket. Lead was melted and cast into other heads for reloading later on.
-
Reminder: Delaware drops Virginia reciprocity on 12/7
Non-res UT and FL are still the "platinum" cards for NJ residents as of now! Gets you 34 out of 50.
-
Henry Golden Boy
All I can say is you will enjoy it. Look into Skinner Sights. Makes a great rifle even better.
-
Merry Christmas Everyone
Happy Holidays all. Put your worries aside for now. Celebrate with you families because in the end they are all you have. Enjoy them, cherish them. See ya back here on the flip side.
-
+1 for Oak Ridge Firearms
Great meeting you today. Pleasure doing business. Simple, easy, fast Thankx, again.
-
Ammo or another gun?
That sounds like a great plan............
-
What scale does everyone use?
Use a no name digital scale for measuring when adjusting charge weights. Have an old Hornady beam scale as a cross reference and backup. Always use both when setting up powder drop to start a run.
-
Ar upper other than .233^5.56
Russian 5.45X39 will probably be corrosive. Because it is a necked down x39, magazines could be an issue too, as the taper of the shell requires a tapered mag. Have heard Magpul E-mags have worked but we are not allowed 30 rounders. P-Mags have be hand modified, but again not in blocked mags. So finding mags could be an issue. 38/357 does not work well in semi-auto platforms, as the case has a rim at the base for head spacing. Most common AR rounds headspace on shoulder or case mouth, much easier to do. 300BLK is a shortened 223/5.56 case to accept certain 30 caliber heads. This allows same bolt and magazines to be used, just a barrel change. There are about seven or eight different calibers available for use in an AR platform. Outside of 223/5.56 or 7.62x39 most are not priced to compete with these standard market rounds. Pistol caliber AR's all have their own individual issues from magazines to bolts, etc. DDLES does make special AR lowers to run 9MM or 45ACP with Glock magazines.
-
Ruger Mark I: A love/hate relationship
Here, here, Nick. My MKII has gotten better with age. Smoother, easier with each cleaning. Once you figure out where things should be, parts fits together real slick. I have not seen the need for the Majestic kit yet. Smoothed out that bolt retaining pin with a good polishing and has worked perfect. The Volquartzen internal parts are a bigger need for me. Used the MKII Gov't for years during Bullseye, thinking about going back to 'tuneup' again.
-
Favorite Hunting Rifle and why
NJ deer shooting would be either shotgun or muzzleloader. Out of state hunting is best served by a bolt or lever gun as some states like PA do not allow semi-auto rifles.
- M-1 Garand Or 10 ga. SxS Muzzleloader For Hog Hunt? Help Me Decide!
-
Auto Repair question - alternator
Could be the regulator is flaky. Most new cars the regulator is built into the alternator. I had a problem with the alternator once, tested OK, replaced battery and then same thing battery dead again. Turned out one of the brushes in the alternator wore out. Spring to hold it in place was now making contact with armature. When the spring wore down, contact became flaky until spring worn out. So sometimes it tested good, other times dead.
-
PWS FS556 install
If mig welding, any piece clean metal round stock that fits below the top of the hole in the brake, such as a piece of clothes hanger, etc.. Or you can use a taper press pin if you can find them.
-
Newb Stock Advice....
Once you leave the state of NJ do can do what you want. As long as the stock does not move while in NJ you are in compliance.
-
Help me pick a car...
Owned two Dodges, never again. Always something to be fixed, or replaced. Moved to Hyundai. Have an 05 elantra, 07 sonata, and a 08 elantra. The elantras are rock solid. The 05 is pushing 160K, body in great shape, still runs great, nothing but normal maintenance. The 08 has 50K, and also runs great. The 07 has 75K and has had a few problems I feel should not be there. Motor is awesome, but it loves rear brakes. Eats them like candy. This last time I actually had a friend who runs his own shop tell me that Hyundai knows of the problem, but will not address it. He provided me a work around that seems to work fine. Has to do with corrosion and poor fitting parts. Other than that, I would say they are just as good as every other rust bucket. There are two types of cars. Those that are broke down, and those that are about to!
-
308 or 30-06
In a bolt .308. Especially if working your way up from a 223. 270 while shooting flatter, is just a necked down 30.06. Still take the .308. '06 may have been the king, but it is being replaced by new king the .308. If you ever get a .308 AR, your right there.
-
Application question
Mental health record checks are to see if you have ever been interred at an institution for treatment. I know of no check to your personal physician unless you state the reasons. We all experience anxiety from time to time in our lives. When it becomes a daily occurrence that effects how you live your life, then it becomes a serious mental illness. Being afraid to fly, fear of dogs, etc. are normal human emotions based on prior experiences. How you answer is your choice. Just bear in mind that the response you give may require you to seek a letter from your physician that you are OK. Is he willing to do that? Are you willing to do that? These are all questions you must resolve for yourself. It it up to your local chief to decide if he feels you are fit enough for a FID or P2P based on the answers you provide.
-
Ruger Mark I: A love/hate relationship
SIt down with your pistol and take the time to review each step in assembly and disassembly. Now do it, over and over again until it is second nature to you. Is it a pain? In a word, yes. Will it help you to understand how it works? Yes. Granted these pistols are a little tricky to clean and assemble, but it is one of the best 22LRs out there. Search Youtube for more videos, watch them all. Now put together in you mind the best tricks from each. You will master this and this issue will disappear. When I first got my MKII Government, I dreaded cleaning it. Sat down with the instructions step by step and kept at it. No Youtube back then. Still having problems, then seek out a buddy to help you with it. "Oldtimers" at my club where a great help with this. Biggest thing they kept saying is "Practice, Practice, Practice". Took a while, but it worked. It's like riding a bike. Once you master it, your GTG. Good Luck. PS. Spend the money get a bottle or two of 'FIRECLEAN" off Amazon. Clean the entire pistol spotless as possible with anything you want, including bore. Treat with "FIRECLEAN". It does make a difference.