Everything posted by T Bill
-
New build throwing spent casings
Extractor Spring Kit - 3 pack. Good to have on hand next time you order from BCM or source yourself. I also keep a firing pin or two on hand. http://www.bravocompanyusa.com/BCM-Extractor-Spring-Uprade-Kit-p/bcm%20extractor%20spring%20%203pack.htm
-
How do you all store gasoline?
I find Startron is best to stabilize. I rotate and stabilize the fuel as it is purchased. I have a 14 gallon tank and a 5 gallon can. Of course the generator tank is always full also (7gallons). Cans are stored in a mini shed away from the house. I only use high test (92 octane) in all the small engines, all starting problems have gone away. If time is up on the storage cans or genny (6 months, doesn't happen often), it goes into the car's tank, and start again. Have two Eagle metal safety cans (1 and 5 gallons), the 14 gallon is poly with a gas station type hose. Also have poly jerry cans that can be used in an emergency.
-
Out of state resident CCW in PA
Non-Res FL CCW dropped by PA 6/8/2013.
-
Glock gen 4 models vs gen 3 sf models
Your statement is true. G4 models are SF size w/out the backstrap.
-
Great Amercian Outdoor Show - Feb 1-9 Harrisburg, PA
Less crowded during the week (opens at 10, not 9). Some of the smaller vendor booths maybe empty for short periods as staff take food/bio breaks. Some invited guests may only appear on certain days, see the web site for that (Nugent lovers alert - suppose to make appearance on Wednesday, 2/5). Also seminars may only take place on certain days. NRA's first year running this show. I bet you they are going to make a big push to keep it all going all the time. I will be going sometime during the week, probably the best weather day.
-
NICS and actual transfer not the same day - OGAM?
The counter always start when you take possession. Paperwork has to reflect this. Your NICS is good for thirty days after approval. Remember we were waiting 2 weeks or more for NICS to come back? You may have paid for it, but you did not own it until NICS said OK. 4473 was dated with the date you picked it up.
-
Ever wonder what happens when 100 primers go boom in your press?
When that thread said water and plenty of it, they are correct. Do not use a ABC or CO2 extinguisher. It will scatter everything all over the place. "x" type sheetrock over the press, same as what's over your heating system. The more nitro in the formula the hotter the flame. Been using Winnie primers, any chance they would work?
-
BOGO Brake Clean - Advance Auto 1/30 thru 2/28
Don't know who uses brake clean to de-gunk their equipment, but Advance Auto is having their BOGO sale on Wearever Brake Clean again. OTD for a case of 12 is $51.23, second case is free ($2.13/can). Takes all that oil and caked on stuff off.
-
PSA Complete lower Magpul equipment... $169
What's great is try and find the "BLEM". The lower have worked well, no problems.
-
please delete
Well another option, then. Do tell where.
-
Possible move to PA - advice on the Allentown area?
Check at PAFOA. Look at county lines and the Sheriff's attitude in those counties. Some are a bear with LTCF. Emmaus is at the western end of county. FYI. I78 eastbound in the AM from LV to I287 can be a traffic nightmare at times.
-
please delete
Info at www.mohrswidowmaker.com
-
Upper to Lower fit????
An Accu-Wedge will only work on low shelf lowers. You will not be able to stuff a wedge in a high shelf lower. I have not seen any proven documentation that a "loose" lower makes a less accurate rifle.
-
Help understanding the Dillon presses
Add a little reading to the mix. Maybe can explain Nick's and my opinion on Hornady APLNL. www.UltimateReloader.com has some interesting facts also. Started with a Hornady Projector 25 plus years ago. Still runs today. Added a LNL last year, just for pistol (9mm,45ACp). But staring to think it maybe used for small rifle as well.. Good Luck in your decision. dillonLeeHornadyComparison.pdf
-
Talk to me about a "Pelican Case"
Pelican 1750 $200. Pelican 1750 Long Case.pdf
-
Shotgun Shootout! January 25th at Clinton WMA
Post the link, good info for anybody.
-
Cheapest 7.62x39 barrel?
Will need a X39 Bolt also, about $60, and a x39 mag setup of some kind (maybe just a follower).
-
300 blkout build?
http://www.guns.com/2012/11/16/travis-haley-300-blackout-year-closer-look/
-
Ghost Gun Lowers
Remember last year at this time they were part of the group of vendors who felt their product was worth way more than the market demanded. Sorry not me, ever.
-
Drop in Handguard
my bad didn't read it all
-
300 blkout build?
It's a carbine gas length. Cycles fine.
-
300 blkout build?
I have a 16" SS 1:8 made by Montana Rifleman that since has been bought by Remington arms. Great barrel for the money. I see it is no longer offered.
-
300 blkout build?
Built a 300Blk about a year ago, I love it. I was looking for something in the AR platform, but with a larger bullet, but not the 7.62x51 (.308). In the past I have used 7.62x39 and really liked it for hunting. Years ago there was an NRA article on how to load a 150 grain 30 caliber in to a X39 brass platform and use it for hunting. This was my ticket to using a "ballistic" 30 caliber type round with better hitting power without going into the 308 category. I have an x39 AR upper, and a bolt, so all this just felt like the way to go. The 300BLK keeps me in the 30 caliber which I like. Can load from 110 to 225 grain with enough stopping power for the game I hunt. Adds a new dimension to hog hunting which I will be trying out this spring in Florida. Going to be a 300BLK vs 7.62X39 competition with ARs. I reload so making brass is simple enough just a little time consuming. I tend to stick to common calibers for ease and reloading. 22LR, 17HMR, .223., .30 is all that I use now. So anything that fits into these are welcome. This way I don't have to stock a lot components. Plenty of choices with 30 caliber. Have pulled M80 147gr heads, using 223 with split necks to make 300BLK brass so new life to old cases. Same primer as 223. Different power on supersonic rounds but the x39 uses A1680 as well (If I can find any). Can't see why I should not have done it. I have not purchased any ammo for this yet, made all my own. Just bought a box of Sierra MK175 and some H-110 Powder. So ammo cost is real low right now, not any more than other 30 caliber rounds. I have seen 223 brass with bad necks for 7 cents a round. Primers 3.5 cents, Powder about 7 cents and heads .10 to .40 cents. So about .30 to .60 cents a round. I went with a 16 barrel. Cycling can be an issue as the current powder choices I feel do not give the full potential to the round. Shorter barrels may create issues unless you go to a pistol length gas system. There is a 300BLK forum moderated by a person that was involved with the development of the round. Lots of good info there. http://www.300blktalk.com/forum/
-
Cleaning Stainless Steel Revolver
First off lead bullets are sold mostly two ways, cast or swaged. Swaged are the softest and if pushed down the barrel will lead up your bore. They are made by cutting a length off of a lead "rope" and pressed into shape and lubed. Swaged are good for bullseye, cowboy action etc. where speed is not a factor here, just get it to it's destination as accurately as possible with the least amount of recoil. They have the lowest Brinell hardness. Cast is molten lead mixed to a specific hardness with tin and antimony and poured into molds and left to harden. Then it is swaged to size and lube applied. Brinell hardness is higher and it takes more to distort the bullet to get it to seal in the bore. This hardness allows greater speed and less melting of the base. Both are cheaper than any copper coated bullet and some have "gas checks" which are copper cups that are press onto the base to stop the heat of the powder from melting bits off of the base. Plated are lead bullets that are made by swaging or cast and then dipped in vats where copper is added by an electrolysis. Completely incased in copper they reduce lead fouling because there base is covered in copper. They can be shot at any lead bullet speed. Jacketed bullets are thin copper sheeting that are cut and formed with a dense metal center of lead or some other dense metal. The base is open and you can see the core if looking at the base. TMJ bullets are jacketed bullets that have a enclosed base. Hope this helps explain bullet types.
-
Cleaning Stainless Steel Revolver
Looks a lot like "Flitz". I know Flitz will take the marks off SS using a dremel tool and a soft pad. Use www.big45metalcleaner.com for cleaning bores and chambers. I use Tetra Lube copper solvent to help get the lead and copper out as well. Final clean with brake clean and then let it dry and lube it up.