Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

T Bill

Members
  • Joined

  • Last visited

Everything posted by T Bill

  1. Built a 300 BLK Carbine, 16" SS barrel, Todd Jarret Handguard, Mako Group grip and stock. Load 150 M80s and 175 SMK grain pills from brass I converted (1986 IVI), with H110 or AA1680. Love it. Taking it to FL for hog hunt in Feb/Mar 2014. Looking forward to using different weight pills and speeds for other hunting. AR PIC's, Lets see 'em Page 47 Post #1401
  2. Build it, enough said. See Legal Transfers for Stag 3H build less lower. Xmas special on now for $569 shipped. NJ compliant models available, just ask. http://www.ar15.com/forums/t_7_121/1242439_2013_Christmas_Special_Stag_Rifle_Kit_less_stripped_lower_Group_Buy_ends_12_24_2013.html
  3. T Bill replied to Donobieus's topic in Shotguns
    Keep saving......Remington 870 or Mossy 500. Look for a good used one if possible. Don't like either. They're mostly truck guns. Something to beat on and not worry about. If it goes bang then its GTG. What are your intended uses for it? Mossy 51482 Combo at TJ's in Bayville, thru Gun Genie, 380 out the door. I know its almost twice the price but two barrels 28"VR and 18.5"CB. I'm sure if you look a little deeper you could find something to fit. Good Luck.
  4. Slave pin and roll pin punch. Do not use vice grips. You will crack the "ears" on that receiver if the hole is out just a little bit. Read this>>>>>>>>>>>>> http://www.ar15.com/content/guides/assembly/lower/
  5. And, if I paid cash for it, there would still be a gap, taxes, etc., new or used. Point?
  6. Have them on mine. I like the finger grooves, the rubber type feel, and no backstrap. Nicer for short fingers.
  7. First, you are not the first, nor will be the last, to scratch the finish near the bolt catch pin. Call it character, patina, whatever you want, but I venture to say there are more built lowers out there with these scratches then not. Black Magic marker is your friend here. As to the hammer hitting the catch, this is normal Just do not go snapping the hammer against the frame without the upper in place with the FCG, unless you have a hammer stop installed on the lower. This has shown to crack the frame rendering it useless. Won't happen every time, but not a good idea.
  8. It is always better to finance it these days, as much as you can stand. Not only are you establishing a credit score, showing you can be trusted to meet your debits, you will be paying back the loan with cheaper dollars due to inflation. While still having the your money for a rainy day fund. Keep the loan for more than 2 years, and then if you wish pay it off. By keeping it two years you have established or added to a credit history. Biggest mistake people make today is not establishing a credit score. Nothing moves without it. At some point, your creditors will want to see this record. They don't care if you paid cash all along the way, they want references to see if you can be trusted. Even employers now will do credit checks for employment. No borrowing history or history of borrowing and owning too much is a red flag, even if you are the best candidate for the job. Score shows you can be trusted. I would finance as much as I could, at the lowest rate possible, and just get used to making monthly payments. Remember, you can end the load any time you want if you have the cash to back it up. Make early payments if you want, but these do not help credit scoring. Believe it or not, a good time to buy is in the winter, people are not thinking about buying cars then, they are thinking about how they are going to cover that holiday nut. Wait till spring with the good weather and so are a dozen other people, making deals tougher. Either way, dealers need to sell cars to make money. If they sell their quota the day you show up, your not getting a good deal. I would do my homework, and go on Monday of Presidents Weekend. Last new car I bought I did all on paper. Walked in looking, left with a new car, zero percent financing, not a dime out of pocket. Cars, taxes, license, fees all financed. I put high mileage on my cars, so residual for trade-in is not an option. I run them till they die. This one is still going eight years later. I buy new because when you buy used you pay less but have to set aside some money for problems which may or may not happen. If they do happen it leaves a bitter taste, and you end up spending the money you thought you saved. For that I buy new, take care of them and keep running them. Cars today are lasting longer with less maintenance.
  9. T Bill replied to thug the bunny's topic in Rifles
    Personally I would stick to the 308 caliber. Lots of choices in heads there. 223 can be pushed up to 80 grains and 308 starts at 110 gr. While a nice shooting round, don't see the need to stop at 243.
  10. Its the way to go. Get out your Google-fu and search this site, plenty of good info here. Remember, there are no stupid questions here. It's your decision to determine how much effort you want to put into your build. I fail to see how you could screw up an upper build given all the information available. You will need that barrel wrench and a head space gauge ( I really like to check that myself). All the rest are common tools. Remember you have friends here willing to help! Good Luck!
  11. Yea, tire shop monkeys whaling the lugs nuts to Cleveland. WHY? Had new tires put on the car, tighten the lug nut so tight when I went to rotate the tires the stud twisted right off. What a b**** to replace. Had to take the hub off to press out the old, and install the replacement. $2 stud cost me a day on the driveway and a front end alignment after the hub was put back on! Never again, mount and balance my tires, I'll put them on the car. Glad I didn't get a flat and had to change tire on the road, I would have been super p******d then.
  12. I wouldn't kick the 650 under the bed. Better unit than the 550 by far. You need to figure out how much you are willing to spend on a press. I would consider the 650 vs the LNL. In progressive presses I have a LNL and an old Hornady Projector. Like them both. Ultimate Reloader has some good reviews worth investigating. I attached another opinion, don't remember the author, good reading here too! Good Luck with your decision. dillonLeeHornadyComparison.pdf
  13. ...

    T Bill replied to silverado427's topic in AR Discussion
    Here's one site to help with your quest. www.arpartsfinder.com
  14. T Bill replied to sof's topic in AR Discussion
    Hey, SOF, I say build it yourself. There is now way to describe the feeling of knowing how your rifle works. And the ability to change its configuration when you want to in the future. We are here to help. I'm right here in Warren County and you can PM me if you need something or a little help. I would lay out a proposed build, list it for us, and we can help you find the parts and build it. Good Luck!
  15. Running it now on the 22LR pistols and rifles to see how it holds up against the infamously dirty cartridge, looking pretty good so far. Update later.
  16. Look for Ruger AC-556, the full auto version, used by a lot of private security firms, especially around nuke plants.
  17. Best time to go to the range on weekends is when NASCAR is running. Place always seem to empty out 1/2 hour before the start of the race.
  18. When done shooting 22LR in your AR, change the bolt back and shoot 5 .223/5.56 loads out of the gun. It will blow any residue out of the tube. When you get home you can clean it any way you desire. Never had a problem.
  19. One week to learn the music and the routine, amazing.
  20. FYI, Cabelas has a special offer posted... TRS-32 for $100
  21. This is something new. My town did the same thing. Cannot hardly see the lettering during the day. Shows up when a light is cast on it at night. Not being used as a unmarked car, but a regular patrol car. Seems that is the new way they are headed, stealth patrol cars.
  22. If you have never taken a tube off of a lower receiver then it is important to remember to be careful to make sure you do not loose the buffer retainer and buffer retainer spring held in place by the tube and the take down pin and take down pin spring located under the plate the castle nut is holding to the back of the receiver. You Tube is your friend here.
  23. Yes, G17 will take G22 upper and a AA 22LR upper as well. As an option Lone Wolf makes interchange barrels as well that work very well. Never had a problem with any of them either.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.