Everything posted by T Bill
-
Lautenberg Dead
Now what kind of stupid law will the Senate pass in his honor?
- AR Component service life
-
Dunkelberger's -- Egg on My Face
If you feel the price is right at Jere D's, then by all means, buy it. If not in stock, or transfers, etc.. walk away. They do not like to handle incoming transfers, period. One of the few PA places that stock NJ compliant longguns. Locals avoid this place like the plague. Not always the best solution, OK in a pinch. Prices have been better here in recent years. As far as the Bloomturd settlement, the terms of the agreement are over. No looking over your shoulder anymore. Used to be it was up to you to be in compliance in both the purchase and residence state, not the FFL's problem. So sales were freely done on weekends to NYC bennies. I'm sure there were many sales done. Not necessarily straw purchases.
-
The REAL Sandy Hook promise
Even with the meeting in my backyard, I had to stay away. I will not debate/converse with ignorant people. I was raised to belive you do not argue with a pig, you both get dirty and the pig likes it. Or, don't argue with a fool, people watching will not be able to tell the difference. My temper will not allow me to be in the same room with them. You cannot reason with these people. They know they are right, and you cannot, and will not, convince them otherwise. The "magic bullet" is banning all guns. Right! The government will take care of me. Right, again! Simple solutions for simple minded people. Only when they personnally get "stepped" on by their own government or fellow "citizen", will they understand and change. They complain about taxes, etc., yet want more government. Please! I commend you for attending and voicing you thoughts. It is apparent that the speaker could not wait for you to shut up. Definite lack of intelligence. Just for s and g what was the attendance count? Knowing the room size, not to many I suspect. I have talked to quite a few of other people here in the area, and none were aware of the meeting, or could care less. Again, transplants, "I'm here now and your just going to have to change!" Not this week, or any other missy! When I moved here, I embraced the way of life here. So much nicer than NENJ. I am sorry to say that I regret I stayed within the PRNJ when I moved here from Essex County more than 30 years ago. I have PA roots, and just didn't listen to them. If I knew then, what I know now, I would have kept going.......... I still am thinking for my own sanity and my families, the time to move on is fast approaching.
-
Question on the MOE Rifle stock assembly
A2 spacer is not required
-
ACTION ALERT: 5/29 Anti Gun Meeting in Blairstown (Warren Cty)
Yeah, they are even here. Not many, but still here. Transplants from other parts of the state. They move here and all of the sudden things have got to change! Best example was a few years ago the township had to pass a right to farm law. Seems the bennies, as we call them, couldn't stand farm "smells" and wanted to stop farmers from their way of making a living. That went over like a fart in church. This will too!
-
Question on Lee 30-06 Deluxe Rifle dies.
Resizing brass for semi-autos is with full length resizer. This allows easier loading of rounds. Neck sizer is for bolt actions. This is done for accuracy.
-
What guns have their own calibers?
.475 Wildey Magnum Cases are formed from 284 Winchester brass with the neck opened to take a .475" bullet, and the length is the same as the 45WinMag. Velocity at 100 yards from the muzzle is equivalent to the muzzle velocity of the 44Mag. http://www.wildeyguns.com/wildey.html
-
Recipes for Garand
http://masterpostemple.bravepages.com/M1load.htm 147/150 fmj, W748 - 48.0 Varget 47.0, YMMV Reference only No hot loads if you love your op rod!
-
Hooked - Now I need a Muzzleloader
Thompson Center is the way to go. Have several over the years and they all worked perfectly. Last one was an Impact for the new shooter in the family. I would make a trip to Cabelas and see what the Bargain Cave has to offer. Always have discontinued models in there. It is getting close to the time the new models will come out. If not, the gun counter will sure have something.
-
Fair price for powder
He does have stock. It does change very fast given the current market. You would have to go in person. Yes, it is possible he would be out of something at any given point in time.
-
Fair price for powder
T & T Reloading, Stockertown, PA Unique 8lb $122.39 plus 6% PA sales tax.
-
Extractor Question
Actual use. Works well. http://www.ar15tactical.net/ar15_extractors.htm
-
Handgun caliber lever action for wife?
Get rid of that plastic magazine follower nothing but problems. http://www.thesmithshop.com/magfollow.html Slick up that action too with a lee's gunslinger kit. http://www.dillonprecision.com/#/content/p/9/pid/24839/catid/17/Gunslinger_Spring_Kits_Rossi_Navy_Arms_92_lever_guns
-
Physician Qualification and Liability: Firearms Safety and Counseling Representation
Link no work!
-
Muzzleloader transfer between NJ residents
Basically same rules as modern firearms. FID, DL, and COE or P2P as the case maybe. .
-
Let see those Rimfires. =P
Fandamtastic. Peep sites with different aperatures and mounting locations. Easy to install. Puts you right on the target. Have them on the octagon henry and a rossi '92. Wouldn't leave home without 'em. http://www.skinnersights.com/henry_rifles_18.html
-
Up in Maine , any shops to stop in ?
Ya got answers for guns and beer, now all you need to do is hit the docks for a few cockroaches of the sea at Portside Grille.
-
Sussex co NJSP Newton question
NJSP barracks in NW Jersey are known for taking forever. Just have to wait it out. NJSP Hope can take up to six months. Why? Know one knows. They blame Trenton. Cannot say for sure.
-
Let see those Rimfires. =P
This needs a Skinner Sight.
-
Utah CCW question
If you move to a state that has an agreement with Utah (like PA), you will need that state's CCW first (Utah law) and file a copy with your application. I believe you have up to one year after taking the course to file the application. Utah's law states the permit will be issued within 60 days. However, if final checks by FBI, etc. are returned late and disqualify you, Utah will mail you a letter suspending your CCW.
-
Getting Wife to Range
Tread lightly here my friend. She has suffered a tragic and traumatic loss in her life. Give her space and time. I know you would like her to be able to protect herself, but she has scars and demons to deal with. She is moving forward in her life, so go with the flow, wait for her to bring up the subject. Let it go for now. She will come around and time heals all wounds. Good Luck
-
need help hanging interior doors
Becareful, using a hollow core or solid core door? Hollows will require a lot more work if frame opening is non-standard. Some solids are not solid either, fillled with compressed sawdust type material. Requires internal filler strips be made and glued in. A good lumber yard can have the door slab made to fit the opening, then you can miter for hinges and door handle. Not cheap but door will fit nice in opening. I see your in Wayne, Kuikens in Fair Lawn or Roseland, Maresca's is Pequannock, or West Essex Lumber in Roseland are a few I know that can all have a door slab made to fit the opening that you can then hang or have someone do it. You could choose a style that matches close to your existing doors, if you are keeping them, or choosing new.
-
My family dosen't agree with my 2nd Amendment right?? WTF?
Another member has posted a reference to an article in the forum that I feel is relavent to your situation. http://www.iowastatedaily.com/opinion/article_1c144792-b36d-11e2-8ac6-001a4bcf887a.html?TNNoMobile Print it out and read it. Let them read it. Curious to hear their response. Of course it means a "family debate" is possible. But, just see how open a mind they really have.
-
M&P 15 ORC Barrel DIAMETER ?
Gas block sizes are .625, .750, and .936. A guess would say .750, because it does not look like a lightweight .625 or bull barrel .936. To be sure maybe you could ask over at the S&W forum. I am sure they would have your answer.