Everything posted by T Bill
-
Reported explosion near the finish line of Boston Marathon
I'm sure there were "plain clothes" in the crowd all day. What was the "colors" for the day. We will never know, just saying. Backpacks part of the "costume?" They could be people of interest or they could have been ??.
-
Midway shipping
I will give you Midwayusa has quick shipping. Out the door pretty fast. But, the shipping fees are getting a little out of hand. Went to buy something there recently and the S, H, I fee was 40.95 at checkout. Pretty damn high. Went to Midsouth Shooter Supply and they had same items shipped for 16.80 shipped. I'll wait two more days. Items were priced a little less at Midsouth also but not the factor here. I am beginning to watch Midwayusa's S, H, I fees a lot closer now. No, NRA round up was eliminated from the comparsion, strictly comparing shipping fees.
-
Dillon 650 help needed
Recheck primer seating depth. Should be .003 - .005 below flush bottom of case. If seated to deep or not enough will cause light primer strikes. Too deep depth firing pin not making hard enough hit anvils in primer have been bent out of shape at bottom of primer pocket. Too shallow firing pin is pushing primer to set depth, not activating ignition, anvils on primer must be firmly in contact with bottom of primer pocket. Variations in bullet seat depth can be caused by build up on seating depth collet in die. Make sure its clean. Loading lead bullets will cause this. Sometimes "press torque" when progressively reloading will cause bullet seat depth changes. Make sure at each station the dies are set to their optimum. Little "crunches" at each station multiply in magnitude when all are performing a reloading step. Check your depth at the decap resizing station, a lot of people are set too deep here over torquing press and causing twisting in shellplate
-
5.56 OAL?
Loading armscor 55FMJs? Accuracy is not one of their specialties. With a 1:7 twist your barrel and 55FMJs maybe having a little disagreement. Try 62's or even a box of Sierra MK 69's, see if that makes a difference. Takes time to find the right combination. My 24" SS BB 1:8 Wydle took a while to find the sweet spot.
-
Your First 9
Way to go. G22 g4 or G23 g4, 9mm aftermarket barrel and 3 9mm mags. Two guns in one. Build from there. Customized as you want. Plenty aftermarket items. Look for 22LR upper, now you have 3 guns in one. I was never a big Glock fan till my son came home with a G21g4. Now I'm a believer. It's pluses ouotweight the minuses. A good holster and let the games begin.
-
5.56 OAL?
SAAMI Specs OAL 2.125 - 2.260; Trim Length 1.730 - 1.760. I like trim length to 1.745 and OAL of 2.22 for 55's. A lot depends on the lead of your barrel, bullet length, and powder burn rate. If using 55FMJs, do they have a cannelure and how are you crimping them? Whose heads? A lot of factors here to mess with. Try 1.750 trim length to start. After that need more info about load to review.
-
Ordered the gun today
Call Jim Flynn and tell him you have ordered from CZ Custom and could he fax his FFL to them. He will need the number for CZ custom. He will fax it to them, or he will give you a copy of his FFL so you can fax to them, his choice. Be sure to include your name and order number if you have one on the fax. When it comes in he will call you. Go fill out the forms and wait some more. When your NICS check comes back he will call you again, you can settle with him for the transfer and NICS check, and then its really yours. Good Luck. Permits are good for 90 days. Watch this closely as you will have to return to the issuing authority for an extension (additional 90 days) if required.
-
Palmetto State Armory - Hornady Progressive Press (095100) - $429.99
Available with a little digging. Brass is the hardest to find, followed by primers, then powder, and finally heads.
-
Palmetto State Armory - Hornady Progressive Press (095100) - $429.99
For those who have been looking............ Don't forget your 500 bullet rebate.......... http://palmettostatearmory.com/index.php/hornady-lock-n-load-ap-progressive-press.html
-
Precious metals getting hammered today
US economic data released today showed retail lower than expected. Crude dropped too on slowed economic activity. Looks like a sh$tty spring for sales.
-
Something Is Radically Wrong With This Gun Survey
Because you understand the term semi-automatic. Most people hear the word "automatic", nothing else, and equate to full auto fire. This is what their answer is based on. I wish we had a better term than "semi-automatic" or "autoloading". People are really that stupid. Ban what they don't understand or care to. This is why liberals love a dumb population. Easier to control. Thinkers are a danger to them. Keep on thinkin'
-
Reloading pros/cons and advise
New brass comes with a federal excise tax added to the cost. Keep your old brass, you paid for it. The number of times you reload brass depends on how you load it. Bunnyfart pistol loads will allow you to reload 20 or more times. Hot snot loads maybe as low as 5 times. You will need to check your condo agreement for any special terms, otherwise some old 50 caliber metal ammo cans work great for storage. Store primers and powder in different cans. Only have out what you need to load at that time. Small storage lots are your friend. Look for once fired brass. It works OK. Pistol shooters look at boards like "Brian Enos" for OF brass deals.
-
Cost to reload 5.56
You need powder, primer, and bullet to reload. Cost is determined by quantity and type of componets purchased. Powder is sold in 1, 4, or 8 pound lots. Primers in 1,000 or 5,000 lots. and bullets from 100 count to 6000 count lots. While bulk usually relates to cheaper prices per unit, powder type and bullet size and type are important factors here also. Average reload price today for 55FMJ 223 is around $5-6 per box of 20, if you can find the components.
-
Reloading pros/cons and advise
Will you save money? Per round, yes, alot. Overall, no. You will just shoot more. Other Pros: Ammo custom tailored to you and your firearms. Being able to shoot ammo that enhances the shooting experience. Joy of creating rounds that enable you to hit your mark with great accuracy. Cons: Finding time to reload. Having enough reloaded to go shooting. Where to take a class? NRA sponsors a reloading class. Need to look it up. Shongum Sportsmans (Mansfield, NJ) will have a clinic on 6/30. Cost of Equipment: As much as your budget can afford. Hornady, Dillon, RCBS, make good loaders. I do not like Lee. Just a personal preference. I would budget $750 to start and go from there. I would begin with pistol cartridge reloading to start as this is easier. Hook up with an experienced reloader to help you out. A single stage and a progressive are both useful for metallic cartridge reloading (pistol and rifle). Shotgun requires a different press. Unless you shoot a lot of shotgun or participate in competition with shotgun, retail may be best. Where to buy? Online Midsouth Shooters Supply, Grafs, Natchez, Powder Valley, Cabelas, to name a few. Local? I am not in your area so others can ring in here. Solomon's is a name I hear on this board alot. I would say go for it. You will enjoy the experience. We are all here to help you. I don't think there is one member on this board who has begun reloading that has regretted it. It is the way to go. Start slow, ask lots of questions, and good luck.
-
Anyone ever do a 7.62x39 Upper?
Have a Colt MT6851DC upper (7.62 x 39), a 20 inch heavy barrel crowned muzzle with a rifle gas system and A2 front site. Works fine. Go for it if you want one. Need barrel and bolt to make it work. Magazine problem related to taper of shell. Required greater bend of magazine body to compensate cases. This caused feed issues. Smaller mags work great (Five or seven rounds).
-
need advice for decent in-ear protection
http://www.amazon.com/gp/product/B001DHJRVM/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1 Howard Leight QB2HYG Quiet Bands Hygienic Banded Earplugs Resealable Bag Box of 10 Each Great for Shotgun, Outdoor Range. http://www.amazon.com/Howard-Leight-Earplugs-Uncorded-NRR33/dp/B0013A0C0Y/ref=sr_1_1?s=hi&ie=UTF8&qid=1365525922&sr=1-1&keywords=howard+leight+ear+plugs http://www.amazon.com/3M-Peltor-Ultimate-Hearing-Protector/dp/B000PW98WO/ref=sr_1_17?s=hi&ie=UTF8&qid=1365526006&sr=1-17&keywords=howard+leight+ear+muffs However I would wear ear plugs and ear muffs together if shooting in an indoor range.
-
JSE Surplus Fail Zero NiBX BCG w/hammer Going F
Gone..........Faster than a speeding bullet............
-
JSE Surplus Fail Zero NiBX BCG w/hammer Going F
Jse Surplus FailZero NiBX BCG w/Hammer $200 25 left going fast. http://www.jsesurplus.com/failzeroar15basickitsemiauto.aspx
-
Glock 30 Gen 4 Failure To Go Into Battery
All this happened with the same magazine? If yes, take mag apart looking for abnormalities with follower, magazine body or possibly spring. Try different magazine. If it was happening with different magazines at the same 8th position, check them also, especially if they all were purchased together or were provided with pistol. This really sounds like a magazine problem to me.
-
Low Pro Gas Block Compatibility. 5.56 vs. 5.45
Use the original one. Already pinned in place. Cut off "A" frame, Dremel remaining block and cold blue. Simple and easy way to do it. Can you install a new gas block, sure. There are no gas block sizes relative to bore diameter, just barrel OD, in this platform. Gas hole in barrel determines flow/volume. Positioning of block is very important. I would take the first option and use the saving towards rail purchase, etc. Low profile blocks are usually hidden by rails.
-
CMMG vs Stag Arms lower parts kit.
Last order to PSA for a LPK less FCG ($37) was shipped in 2 days. WOW!
-
Another 10/22 Post
For making that 10/22 a tack driver: http://www.ct-precision.com/
-
What are you thinking about getting when this all cools off?
Property in a state where America still exists. Tired of this East Coast BS. FYI Arfcom moving to Dallas!
-
Has anyone seen this before? No retaining pin on bcg..
Looks like the original syle BCG retaining pin.
- Least expensive firearm you ever purchased?