Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

T Bill

Members
  • Joined

  • Last visited

Everything posted by T Bill

  1. T Bill replied to JimB1's topic in Shotguns
    One of Benelli's best, good choice.
  2. We will see after Jill Stein's recount of three states. Something is starting to stink. Nothing is signed sealed and delivered until the Electoral College votes.
  3. Sounds like a 'mad minute' five stand.
  4. Some Birchwood-Casey Sanding Sealer and Tung Oil will put a nice look on the stock after sanding and steaming out the rough spots. Good luck with it.
  5. They are not considered telescopic stocks and are GTG. They are adjustable. The Magpul PRS is a very popular target stock.
  6. Fat lady has not sung yet, hold on to your knickers!
  7. It's not bad, BIL has one. A little rough around the edges, but works fairly well. He sent his to be ported and back bored at Magnaport and it came back a new gun. Real nice soft shooter. Tristar has some nice entry level O/Us also. Thought Cabelas had a CZ model on sale this weekend for like $300 off, bringing down to $550s. Here ya go, http://www.cabelas.com/product/CZ-USA-Teal-Over-amp-Under-Shotgun/2289337.uts
  8. Looks like a Do-All Raven
  9. Good price but have to weigh shipping and local FFL fees. Of course the rebate is only good thru Sunday.
  10. Good quality 12V traps cost money, even the single stacks. There are some in the $250 to $400 range that may fit your solution, but require constant maintenance of some kind. Hand throwers get old in a very short time and hand loaded spring ones are not much better. I guess it's a case of what the budget can spare. Earlier this year I purchased my second trap used for $600, and rebuilt it with $50 in parts. Sounds like a lot but new it goes for over $1,200. My wobble trap sells for $2,200 today. Howell Traps in Alabama always has used ones for sale mostly commercial models. You could probably find a good shotgun that can pull double duty as a trap, bird, deer gun . Just a question of cost and action type, pump or SA. Try to make a board shoot that comes around about once a month at Clinton. Plenty of members around to show you the ropes, so to speak. Glad it worked out for you today. Welcome to the club.
  11. AVgas and a little diesel would go nicely for cleaning snow from the sidewalks. Wait, I don't have sidewalks, oh well.
  12. Here are the dimensions. If the tube does not meet the specs then it is not correct. I once had a similar problem with a A2 tube but the butt screw was too long. Here all I can think of is the length is not correct. Measure your good one. You do not need to take it out of the recieiver, and then measure the problem child. Hope this helps. Here is a thread with someone who had a similar problem............... https://www.thehighroad.org/index.php?threads/could-someone-please.589462/
  13. Good Luck,RR. Keep in touch. FYI, my BIL and a few cousins got together for T-Day today in W Palm today, 85F and sunny on the lanai. I hate NJ
  14. You need a valid Hunting License. Bird shot only. You park right in front of the shotgun field. You drive down the driveway till it you have to go left or right. Turn left, road sweeps into parking lot, field is directly in front of you. Have a safe, and good, time. Look up some pics here from previous shoots. Kinda gives you a feel for the layout.
  15. T Bill replied to croze's topic in Introductions
    Welcome aboard, mate. We are all here to help. Remember, there are no stupid questions,
  16. No recourse, each agreement is a separate item. NH required home state CCW to get NH NR CCW. Well that changed with the court decision in NH. Meanwhile, PA was trashing their AG in court, and she resigned. Well, the interim AG has his hands full no time for NH's status change. Come January new AG, new rules.
  17. Don't hold your breath. We will get much worse before any Federal Calvary comes over the Delaware. Murphy's got to go, but, if by some miracle he does, then we get Sweeney and Fulop back in the race. Gotta beat Murphy at the ballot box. That my friend is next to impossible at this time.
  18. Not that I know of; Only thing I can think of is more price pressure on Pic rail model. I have 2 3MOA FF3 both are models 300324. When I put the one on my Ruger Mark 2 I know I purchased a mount for the dovetail not using the Pic rail, but I do not remember any problems involving the Pic rail. I have the second one still in the box, I'll have to check it out, FYI, same pricing with the 3MOA models as well. Who knows..... Price track it on camelcamelcamel.com shows this is about as low as it has been all year.
  19. Better hope PA DA elect Shapiro lets you slide in PA on a NH CCW. I would not bet on it though. It will be about as good as Utah CCW in PA, NADA!
  20. NJ 2C:58-3.1 A shotgun may be transferred to another properly licensed person for hunting in NJ if done where you are hunting and the shotgun is legal for hunting and you are within the presence of the party hunting. If you want to be 100% covered or you are not going to be with him, then 2 copies, one each, of a COE transfers ownership to him. When he returns it, COE copy back. Don't just destroy them if he has been out of your sight with the gun. Strange poop happens You realize he is the owner of record when a COE is executed, so he better be a real good buddy.
  21. I believe the only difference is whether is comes with no mount 300237 or with a Pic rail mount 300236. Here's the funny part, I know the Pic Rail Mount is separate in the box, so you maybe able to get either if your going to use it on a PPQ Q5. I also heard the FF3 uses the Docter plate but the screws are the wrong size. You need to pick up different screws. See excerpt posts below. Best price on a 300236 so far I seen is Amazon, $199. Spacegunner: Your friends were right. I just received my FastFire3 today and went to mount it, but the tapered head screws that come with the FF3 are too big in diameter for for the Q5 Docter adapter plate. The Walther supplied screws are cap screws and won't work. The screws that come with the gun are cap screws and not made to work in the FF3. Can you find out from your friends, what size screws they used? The Walther plate takes M3 screws. If your Burris uses tapered heads, get M3 tapered head screws. Check the screw length you need. I used 10 mm length mounting my Vortex Viper. This is exactly what I needed to know; thank you. If I can't find a tapered head, a cap screw would work, since the optic is held in place by four pins on the mount. Except for aesthetics, just as solid. As an add-on to the above: Found the right screws at a local, well stocked hardware store. To adapt a FastFire 3 to a Walther adapter plate, you need 3mm X 10mm tapered head screws. They work well.
  22. Free FF3 gets you model 300234 3 MOA only in rebate, not what OP wants. Careful what you wish for. FF3 comes in 2 3MOA and 2 8MOA varieties.
  23. THIS.................... I have a good feeling about a significant price drop will happen 1Q2017
  24. I see in the trade papers that the gun industry is showing signs of struggling with the results of the election. After a big pre-election push and an outcome they wished for but did not expect, they are backed up with product as sales have again dropped out the bottom. This happened in early summer as well as demand just fell off and retailers were struggling to move product. I would venture to say after Black Friday we may see some pretty good specials heading for the holidays as cash flow becomes an important issue. If it continues slow in the first quarter 2017, look for pricing we have not seen since before 2008, as prices drop to create demand. Next spring could be a very interesting time for purchases.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.