Everything posted by T Bill
-
I want to build an AR 15/m4 need help
Any stock that can collapse needs to be pinned. That's it. Good luck with the length. That's why you do it yourself.
-
NEW Anderson AR Forged Lowers $55.00 (Not Blems)
When they are banned, it will be just like last time. Surrender, deactivate, or move them out of state (like 99% of us did). They don't have the time or money to go door to door.
-
I want to build an AR 15/m4 need help
If you have a complete lower sent to a NJ FL for you he will not be able to transfer it to you with a collapsing stock. He will have to have it pinned first (extra charge). However, if you order a complete lower with out a stock and just the buffer tube installed, that's OK, no further work required.
-
AR15 Newbie - building a first AR
Not quite sure of the question. The lower was transferred to you at time of sale. That is all that is required by law. Making the registered part is not allowed in NJ
-
I want to build an AR 15/m4 need help
Correct, you will pay the FFL a transfer fee and NICS fee. Get one fast from a local dealer if it's not already too late at that price!
-
Looking for 4k TV recommendations
Read this for a little background about compression technologies and 4K TVs. Betamax and VHS all over again. http://www.forbes.com/sites/johnarcher/2015/12/19/4k-tv-owners-rejoice-new-streaming-tech-deal-means-your-tv-isnt-a-dead-duck/
-
Anyone do AR muzzle brake pinning/welding in Morristown area?
My bad, don't forget the barrel nut also.
-
Precious metals getting hammered today
I would say PM, ie gold, not currency. At some point currency not worth the paper printed on.
-
Anyone do AR muzzle brake pinning/welding in Morristown area?
Or put on gas block, have it pinned and then finish assembly.
-
Oaks gun show... worth it?
What kind of country are we turning into? Best vendor at the gun show is the guy selling pickles!
-
New Guy Warren county
Don't buy into that "Happy Wife, Happy Life" crap either. Best feeling from sex you'll ever get it when you have "Hall Sex", years later. Some day you'll remember this and say, "He was right".
-
Anyone do AR muzzle brake pinning/welding in Morristown area?
Parts are parts, nothing more. What BCG you have makes no difference, just a part.
-
I want to build an AR 15/m4 need help
Stop asking at the LGS (not all are lousy, we know who they are). Ask us, we know! OK, for your setup, a stainless steel with a 1:8 twist and Wylde chamber will give you all and more than you ask for. Next, yes, the 22 conversion kits work, but i would not use it in a barrel I shoot precision long range in. 22LR leaves lead and crap everywhere. Here's the deal, you replace the BCG with the 22LR BCG and use a magazine set up to feed 22LR. That's it, plink away. Black Dog Machine makes a great magazine here. Conversion kits by CMMG and Target Master are two that I have used. My old USAF kit from the 80's works the best but that is another story. Now for the minus part of the equation. 22LR is best at a 1:16 twist. AR barrels are 1:7 to 1:9 most all the time. Just a little too fast for the old 22LR. So, does it work? Hell, yea it does. Just don't expect match quality. Great way to plink away the day cheaper than 223/5.56. Second, that nasty dirty 22LR crap gets everywhere. A cleaning is required after use. Put the original BCG back in the gun and fire 5-10 shots of 223 through it when done with the 22LR, cleans out the barrel and gas system. Take it home and give it a good cleanup, and your back in business. My precision AR does not get fed anything but the round it was matched up to. When I want to fart around out comes the truck gun or something similar. The match gun is just for the purpose intended. If you don't have your lower yet, work on that. I am seeing spikes in prices now. Seems Obama is back selling guns full time again with this Executive Order crap I keep hearing about. Today I just saw Anderson lowers on a distributor's site that were selling in the $40-$50 dollar range a week ago, listed at $90 today
-
Finished lowers from forum vendors?
Hackettstown Guns and Ammo. Two Anderson stripped lowers $121 OTD. But, heard distributors are raising prices. Don't lag. Some have doubled prices already.
-
Can you hunt pheasant on Sundays
No, just licensed preserves I believe.
-
I want to build an AR 15/m4 need help
Yes, but you'll want a rifle type lower for long range shooting. WOA builds top drawer NM uppers. I built a 24" SS BBL Crowned 1:8 Wylde upper for varmints that works fine. Used a Wilson Arms barrel.
-
I want to build an AR 15/m4 need help
Just order this upper and wait till it's built. https://www.whiteoakarmament.com/xcart/product.php?productid=17553&cat=259&page=1 Then you can shoot the NM course or varmints your choice.
-
AR lower question.
Absolutely. Get two they're cheap and quality is very good.
-
Show us your grips
Like the wood bling. Nothing makes a gun stand out better than exotic and laminate woods.
-
New Guy Warren county
Welcome. IANAL, but before you apply I would consult one on this issue.
-
Just used my 2nd P2P - Ruger GP100
As a owner of a Security Six, I like! Very nice, good luck with it!
-
Daily humor thread
- Ash from Jmac customs
Prettier than Heather LaCroix. Not sure if any smarter.- Precious metals getting hammered today
Going just a bit lower yet. No turn around until world market settles. Not seeing that until Middle East is 'stabilized' a bit. Markets are slow this holiday season.- Tactical clownshoes
New Olympic sport, " Synchronized Shooting"? - Ash from Jmac customs