Everything posted by Vlad G
-
How is the S going to HTF?
Things that are unlikely happen all the damn time. If they didn't you would never hear of industrial accidents for example. Every process, industry, structure, organization, etc assumes an acceptable level of risk in its structure, say for example "This nuclear reactor can withstand a 7 earthquake, or a tsunami, but not both, but that would be very unlikely case so it should be fine". People make those sort of decisions every day. Call it cost cutting, call it normalcy bias, call it risk averaging, but it is part of everything everyone does, at the personal level and at the national level. That doesn't mean that unlikely things don't happen. Grids fail for all sorts of reasons. Anyone remember the 2003 North East grid failure? Or the South West and Cali a few years ago when it failed because some replaced a part half a country away? Do you think when they repaired all bits that needed repair after Sandy the did a) right or b) half assed? If I had to make a guess I'd say economic panic, followed by bank and companies failing, followed by chunks of the infrastructure being abandoned, and sections of the country being left on their own. The big cities will get something, and their suburbs will pay for it by being tied to the urban centers, but not getting the same attention. The rural folks will have to make it happen on their own. There will be all sorts of pockets of all sorts of badness and variations on a theme. We'll probably see every extreme from complete lack of the rule of law to the extreme use of the rule of law, depending on where you area and how important your are and its production is to the leadership. I don't think we'll see "The Road", I think will see something between "Brazil" and "1984" with a healthy dose of "The grapes of wrath".
-
Why are .410 shot shells more expensive than say...12ga?
Supply and demand. Ask some 16ga owners about that.
-
Police confiscate guns, NO ARREST/NO CHARGES FILED... wtf?!?
Well I do and I don't. In many states she is legally required to report this. She also has to choose between a paycheck and turning someone in who may or may not be a danger. I blame the politicians who instead of focusing on actual treatment are focusing on "reporting". They pass laws that require every mental health professional to act a snitch but don't pass laws actually dealing with the mentally ill. In the meanwhile, every sane person decided to never ever talk to a shrink and every outright insane person now knows to avoid the shrink too.
-
Police confiscate guns, NO ARREST/NO CHARGES FILED... wtf?!?
Everyone forgets that it was the word of the shrink, and nothing else. Did the guy say "I'm so mad I could choke him" like ever so many of us have said about something sometime, or did he say "I'm going to kill the Colonel, in the library, with a pipe, at 10pm tonite"? I think no one will ever know, but with every such story every gun owner is far less likely to be honest with a doctor, and that is not a good thing. What if your shrink is rabidly anti-gun and can twist something you said? How open would you be with someone you don't know who's job is to get into your head and can ruin your life?
-
CJUSPSA 6-9-2013
Scores are up. Today was the first day in 12 days that I had my workstation actually booted up, I've been living off my iPad while my house was torn apart and put back together and sadly (or maybe not) there is no app that talks EzWinScore.
- AR Component service life
-
AR Component service life
Barrel life is a function of barrel quality, ammo quality, and what you consider acceptable. The barrel won't "break" but it will lose accuracy until you find it unacceptable. For a chrome lined barrel, it seems the magic number most people consider worn out is around 10000-15000. Other types of barrels will generally last about the same or less. if 3moa is good enough, that that number is probably around 25000. I've had a chrome-molly barrel that lasted about 7000 before bullets where impacting sideways at 25yards. Replace the gas tube when you replace the barrel, they should last at least that long, possibly a lot longer but they are cheap. Replace your bolt when you replace your barrel, they wear to each other. Yes there are some things you can do and get away with it (ie you can use a used bolt on a new barrel, a used barrel on a new bolt, but never a used bolt with a used barrel where they weren't used together before), but the current unpleasantness aside they are not that expensive. Buffer spring should outlast a couple of barrels unless garbage to begin with. Everything else is pretty much forever. Upper, lower, trigger, etc, if made with quality parts they will last a good long time. Same for bolt carrier unless the key is wearing for some reason. Muzzle devices, specially the high pressure compensator can wear out before the barrel, but you live in NJ where they are permanently fixed so just replace them with the barrel. Small springs and pin may wear or most likely get lost, so having a small parts kit is always a good idea. Number of rounds per month doesn't really matter, number of rounds total and how you take care of it is what matters.
-
What optics do you run on your HD shotgun?
I have a man-crush on High Exposure. There are many bits of military type kit that people hang from their guns for no good reason, but RDSs are not in that class, they should really be on nearly everything. Beyond 200 yards they start to suffer when compared with scopes, but under 200yards RDSs are simply unbeatable. You can beat your chest, claim your eyes are all you need, say that simple is better, and so on. Yet nearly every military weapon now has optics on it and optics dominate the competition circles when not purposely excluded from some division or another. The shotgun is not exempt from this, no defensive firearm is. It is simply faster and more accurate to use a RDS.
-
Prices on ammo before they shot up.
Well, prices always go up, you can thank the Federal Reserve if you want. When I started shooting (circa 2000) 1000rd of 9mm S&B was $110, shipped. A few years later when I started reloading my first batch of 147gr bullets where $35/1000 and primers where $12/1000. .22 was $9.xx/500. Prices have been going slowly up since I payed attention, and actually they took a break for a while. I'll bet if you graph it, today's prices are on the same curve that started back then. Besides the recent unpleasantness, ammo prices have been rising because of increased demand (range's were a LOT emptier 10-13 years ago), competition got a lot more popular (specially 3 gun), material prices have been rising (copper), and we've been in some really long wars and shot up a lot of ammo at some foreign hill sides. Plus then you have the general inflation, running around 2-3% officially (and as high as 10% unofficial). That alone adds about 35% over 10 years. It isn't just the recent thing, although that made it worse.
-
Drive by shooting in jackson off of laurel ave.
Another way to look at it is that you don't hear traffic and general noise. Not a bad thing, plus it means you have a large gun range without much bitching.
-
Arrested for a Warning Shot
I fail to see why anyone would think a gun is the only option, and a warning shot the right thing. Pepper spray might work wonders to make someone drop your stuff and back off, so will a fire extinguisher to the face. Just because you own a gun, it doesn't mean that you shouldn't own non-lethal devices and know how to use them. Why do you think cops carry them? The gun isn't the answer to every problem, just like the whole hammer/nail thing.
-
Arrested for a Warning Shot
His only possible maybe kinda defense might be that he reverted to some military experience, like "We used to fire a lot of warning shots at hajji in Afghanistan, and under stress I did the same in this case". Still a terrible idea.
-
Arrested for a Warning Shot
Sorry, warning shots are stupid, and against the law pretty much everywhere. Unless you live in your own mountain valley, you are endangering someone's life. He broke rules 2 and 3 at the same time.
-
Russia Resists A Revolutionary AK
It looks a bit .. clunky? It might be time for a new design instead of the old AK, modified some more. It sure is a reliable gun, but these days what isn't? It needs more then a AR-ification to be a modern rifle.
-
Bloomberg Really Has Lost It
He is not mental, he is a sociopath, like 4% of the world population. Unfortunately, sociopaths do well in business and politics because a lack of conscience makes it really easy to climb the ladders. Even more unfortunate is that sociopaths are often charismatic which leads to idiots falling for it.
-
CJUSPSA 5-12-2013
Done.
-
Operation swill
You just have to wonder what they substitute in their food, higher profits there given the volume. I never understood why people order "expensive" drinks at those sort of places. Even assuming you are getting what you ordered, and it isn't watered down, and it isn't poured over a ton of funny tasting ice, you are still paying for a couple of drinks almost as much as it would cost to buy yourself a whole bottle with a bit of shopping around.
-
Are you a sheep or a sheepdog ?
Yes this, when I first read that post, it made a hell of a lot of sense to me, and it still does today. For those who didn't read it, here is the important bit:
-
Nickel case reloading
To be fair, 10mm will put a lot more stress on the cases, with 9mm or 45 I see no difference in case lifespan, some are beginning to have the nickle wear off and show brass, not flake but actually polish off, with no case issues. In higher pressure loadings this will of course be different.
-
CJUSPSA 5-12-2013
Scores are up. Sorry for the delay, I was out of country dealing with a sick family member.
-
CJUSPSA 5-12-2013
It wasn't bad, was it? Thanks to all that helped this morning.
-
Nickel case reloading
I hoard them. I used to have some odd ejections problems with my CZ75 (since then figured out) and the nickle plated cases where the only ones that worked reliably. I managed to snag like 2000 of them for cheaper then brass prices (this is like 5-7 years ago) and they are awesome. They can be a problem in higher pressure cartridges because the flex of the cartridge walls can eventually crack and flake the plating, when that happens recycle them because you probably don't want flakes gumming up the works.
-
Anti Gun Rally & Meeting
Let nj2as and NRA know? Although I wouldn't call anything Bloomberg supports grassroots.
- ALERT!!!! APRIL 30th SENATE HEARING AT NOON not 10AM See SLP comte page
-
Try this with your AR
Pig fat lubricant is the next hotness? Is it better then SLIP2000? Can we get Pat Rogers to endorse it?