Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. 2000rd is about anywhere between half to 1/5th of the barrel life, depending on what you expect from it. They are supposed to be match barrels, 1/9 twist, not chromed. If you expect match performance, then you probably have anywhere between zero and 2000 rounds left of decent performance, depending on what ammo the previous owner used. For my taste that rifle is way to heavy. 20" HBAR barrels are a bit of a pig, you are looking at 8.5lb rifle.
  2. People buy plenty of overpriced crap all the time, the world economy depends on it. I just think it simply isn't worth buying. I don't think they can manufacture it cheaper either.
  3. Well they can't, look at how many they are selling. The world is really not awash in them, and I'm surprised they are still making them.
  4. Well, I've only handled 2 or 3 mini-14s but every one I've shot was rather picky about ammo and mags and had the accuracy of a 870 with buckshot.
  5. Quite a bit yes. All of those guys have US based manufacturing facilities (and Glock, and FN, and so on). Some of the frames are imported, some are not, the slides and so on are made here. From model to model it is sometimes hard to tell which is made were and how many of the parts are made where, but an increasing number of the "imported" firearms are made here now. This is caused by both import restrictions and the desire for military contracts which often require US manufacturing for a substantial part of the firearm. So no, not ALL Sigs, H&Ks, Beretta, etc are made in the US, but a surprising number are.
  6. Well there is a point to light weight slides, which is why a lot of competition guns have bits milled from the slides, and running supper light springs. The slide of the gun moves ABOVE your hand, and by not being inline with the bones of your arm it creates torque which creates muzzle flip. The higher the moving mass the more muzzle flip you have. If you can lighten the slide you can reduce that. I like light slides just fine, but it really don't want one made of plastic. Go find that 5-7 kaboom pictures set, and indeed the steel slide frame is still there but .. none of the plastic is except for a bit at the muzzle. Where do you think that went flying to?
  7. Huh .. I hate to break it you but ARs are also american made unless you make an effort to obtain one that isn't. Hell, almost every weapon sold in the US right now is made in the US because importing them sucks.
  8. If you ever seen how a barrel "flowers" when an overpressure round lets go, you really get to appreciate that steel slide. I've seen barrels that peeled open and peeled and bulged the slide and nothing happened to the shooter. A plastic slide would have probably exploded into little shards seeking every bit of exposed eyeball on the range. No thank you. Please don't forget you are dealing with 35000 PSI, and that is a very large number.
  9. Those all sound like really good ideas, which is I suppose a bit surprising. Air gun for small game is particularly interesting to me.
  10. It is a mystery. They are less accurate, less modular, less ergonomic (for most) and until recently less reliable. I suspect their price has been held up by fans who don't want one of those damned plastic guns and only steel and wood are the right materials for a rifle.
  11. http://classic.brownells.com/.aspx/cid=0/k=cheek/t=P/ksubmit=y/Products/All/search=cheek
  12. My opinion is that the longest sight radius you can get is what you want. If you can mount your front sight on the gas block or even in front of it (for example my gas block is under my long handguard and my front sight is mounted in front of that). If you can, don't mount sights on handguards, they can move, some are better then others but avoid it. Don't mount magpul sights on the gas block, Magpul recommends against it, and you sure as heck don't want plastic on a bit of metal that gets hot. Also they will be the wrong height. For rail block mounted sights I have one of the these on one of my guns and I like it but you can also use a fixed front sight like this one. For rear, the magpul is not bad for the price but it is not a precision rear sight. Its good enough to 200 yards practical accuracy but it has a bit to much play if you want to shoot groups.
  13. You know, I used to be able to give advice on this subject, but not anymore. 10 years ago there were maybe 4 or 5 handguns that were reliable and functional enough to choose from, but now there are 20 or more. It is a hell of a problem to have, but a lot of it now boils down to personal preferences and ergonomics. The only advice I can give is to stay with major manufacturers (Glock, S&W, Springfield, Ruger, Sig, CZ, Beretta, H&K, FN) and handle as many guns as possible before you make your decision then pick the one that appeals to you most. Odds are they will all work just fine and odds are you will buy a second one anyway once you know more about what you personally prefer from a firearm.
  14. In my opinion all bullpups are as solution in search of a problem. They are awkward to reload, have mostly terrible triggers that you can't do anything about, have questionable ergonomics that can't be adjusted to the shooter, etc ... Are you too short to reach around that large stock? Too bad. Are you tall and feel crowded trying to hold the front of it? Too bad. Half of them only work with very specific ammo, look at the FAMAS which only works with its own specific 5.56 ammo. I do think they have a place in the sniper rifle world, where making a long barreled rifle shorter makes a lot of sense.
  15. Well it is a catch 22 isn't it? I can breeze through it on full verbal auto, have the new shooters confused, and not answer any questions and start on time. Or I can take my time, explain everything and answer every single question and start a bit later. Seeing how these otherwise fine folks have never done this before and they are going to run around you with loaded guns, which one would you prefer I do? I know my preference
  16. Its not really my fault the weather was so nice for November and people came out to shoot, although I suspect it is a bit my fault for starting late, the new shooter intro took a bit longer.
  17. Well I think Orson Wells did have the invasion start in NJ ..
  18. Yes, there will be a entry code on the gate, you can use that to get in during the match. Bring eye an ear protection even if you are just watching.
  19. Registration is 9am, VERY rarely do we finish at 5pm, that is for the purpose of letting other club members know what is the latest the range will still be busy. 3pm is far more realistic.
  20. TBH under 100 yards (and even 200 yards) a red dot is quite sufficient. Before you spend money on a Eotech, find one to look through. If you have any kind of astigmatism the odds are that the reticule will look a mess, basically not a clean circle and dot, but a cloud of messy dots in orbit of a another bunch of dots. I've also seen multiple Eotech die (mostly because of battery compartment issues) but not Aimpoints. If you don't want to spend that kind of money the PA dots are pretty nice.
  21. Not to mention that design is never really the same. The bullet profile is different from manufacturer to manufacturer and that changes how much of bullet body contacts the rifling and the length of the bullet, even at the same weight. Lets say you have a JHP at 230gr from two different manufacturers, and one punches a deeper cavity then the other. Weight being the same and diameter being the same that means that length or profile can not be the same. If the length is not the same but you sit them in the case for the same overall length that means one will have less room in the case then the other leading to different pressures.
  22. The issue is not that you will not not get a consistent group under consistent circumstances while resting an MOE on a bug. It is of course possible, but the problem I see now and then is that folks keep changing their body posture and how much pressure they apply on the hand guard (and barrel) while they do that. If you develop a consistent shooting position it works but in this case eliminating every possible variable would help. The other issue is one of expectation of accuracy. Mono-podding and using a free floated barrel I can usually shoot 2 MOA groups with bulk ammo with a 3.5 MOA dot (this is where using the top of the dot helps). Wedging an unfloated barrel against a hard surface (basically pushing the rifle against the edge of a wall or window) I've seen groups open up to 3 to for times the size I would expect, because I can't maintain the exact same type of pressure from shot to shot from an improvised position. Again, this is a specific type of problem to a specific type of shooting, my point is when you have an unknown problem to solve, eliminate all the variables you can.
  23. Then for sure do not zero from sandbags or any other method that touches the gun forward of the magwell, Including your hand. Zero it by monopoding on the 15/30 mag. Otherwise you can induce random pressure on the barrel as you push against the handguard and transfer that to the barrel.
  24. When zero'ing a red dot, besides the advice above (start as close as possible, 10yards is good, adjust, move back, check screws and loctite them, etc) there are two things that make life easier. First, set your dot to the lowest setting you can see without straining your eyes. This will create a smaller apparent dot and lets you focus a bit more on target, with red dots you really sorta want to focus on the target and let the dot hover over your aiming spot. The second "trick" comes in once you got an acceptable zero, get it finely adjusted buy aiming with top of the dot. Basically use the top edge of the dot on the center of target and zero to that. Combined with the lower intensity setting and using an edge instead of the whole dot you will get a better final zero. Personally I don't like to zero from bags, as I never shoot from bags. I do the walk back thing offhand to get a rough zero, then get the final zero from prone or a bench with the magazine acting as a mono-pod. Obviously a neutered 15/30 mag is required for this. For the kind of shooting I do it is the most realistic approach. The other thing you might want to look for is pressure on the handguard. I have no idea what handguard you have ("standard" or free floated) but if it isn't free floated make every effort to put zero pressure on the handguard. On non-freefloated barrels inconsistent pressure will result to inconsistent results. If everything else fails, look around the range, find the guy shooting the smallest groups, and ask him to shoot a group with your gun. This should help figuring out if it is you or the gear.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.