Everything posted by Vlad G
-
Sights/scopes for "zombies", out to 100yds, rifle
You always aim, you just aim just enough to make the shot. Muscle memory does nothing for you unless all you do is exactly the same kind of shooting from fixed positions at fixed target presentations. A guitar or a computer keyboard are usually used in a consistent position, try playing your guitar while prone or leaning or whatever. Aim, just enough to make the shot. Gangsters during drive by's don't aim and mostly miss. Armies may or may not put thousands of rounds over yonder but doing that in any sort of populated area is remarkably irresponsible and that point you might as well buy a smoothbore musket, why bother with modern firearms?
-
What if SHTF during the winter?
Speaking of which, the Mechanix Winter Armor type gloves are awesome for winter work. They are not treestand kind of gloves, so not the warmest, but if you are active and need to use your hands in cold weather they are awesome.
-
Local source for CR123A batteries
If you have amazon prime and order RIGHT NOW the two day shipping might get them to you on Monday. I'd say own some 2AA flashlight and see if you can still find batteries for those today.
-
Local source for CR123A batteries
Why? Never buy them locally unless you want to pay a 200%-500% premium. If you need them RIGHT NOW, then most places that carry photo supplies will have them as well as some gun shops.
-
What is the best way to store a handgun?
I'm really not concerned about presentation, so I went the easy route. My safe has a single shelf at the top so I've added a couple of under shelf wire baskets that hang from each other, something like this: http://www.amazon.com/The-Container-Store-Undershelf-Basket/dp/B0000CFU1H/ref=sr_1_19?s=storageorganization&ie=UTF8&qid=1351343756&sr=1-19&keywords=under+shelf+basket Those things hold my handguns just fine and use up the center of the safe where there are no long guns anyway.
-
Sights/scopes for "zombies", out to 100yds, rifle
Why would you use a 2x7 on a pistol carbine? WAY to much power and the 2x lower end will make it harder to get a sight pictures. Iron sights or a red dot are the most you should use.
-
What if SHTF during the winter?
Well for one thing I'd chuck the clothing designed at the start of the last century and go for modern one. Light weigh layered winter clothing with a gor-tex or equivalent outer shell and fleece or wools for your head plus decent water proof boots, and a pair of waterproof over-pants. That coat weights what .. 20+ LB? That hat probably doesn't breath very well either. Why carry all that extra weight around when you can probably get the same or better insulation from a 5lb or less 2 piece modern jacket which also is considerably waterproof? A lot of folks have an attraction to mil-surplus stuff, hell I do to, but we need to remember this stuff is surplus because it was replaced by something better. Why not get the better stuff?
-
Does the permitting of air rifles for hunting worry you?
Tell you what, let me use the highpower airguns for deer and I'll gladly not hunt with shotguns. Another way to look at it, is that NJ is getting closer to the rest of the country where hunting small game with air rifles is NOT illegal, an no one banned shotguns in all those other states.
-
.22 LR rifle???
I like my Savage quite a bit:
-
USPSA @ OBRPC - 10/28/12
No, it is the official it MAY be canceled, stay tuned.
-
Moving very fast in formation
We also had a meteor shower peak ok Oct 21 this year.
-
Need some Generator Advice
If it is an attached garage HELL NO. CO poisoning is not a nice way to go. Remember that wind will likely drive air INTO the garage not out so you will be pushing your gases back into the house. If it is detached garage (or a shed) then make sure that water won't be driven on it and have some ventilation. Even in that condition when it comes time to turn it off, run in, turn it off, and run back out and let it air out for a while, don't go in there to search for some tools for 10 min while it is running. You and me both.
-
Need some Generator Advice
I'm sure you can find some sane way to cover it, hide it under backyard table (maybe with a tarp on the table), in a shed with the door open, etc. The biggest thing is good ventilation, and dryness. You don't really want extension cord ends in the rain. The other things is .. don't run it in the rain. Unless you need it to keep your sumps going and you are flooding, wait for the rain to stop, and enjoy the world by flashlight for a bit, and run it when the rain has stopped.
-
USPSA @ OBRPC - 10/28/12
Match time slots are pretty much allocated a year in advance, if we get weathered out, we skip it.
-
Need some Generator Advice
Of the chinese generators the Champion line is probably the best. I did a bunch of research on it before I bought one a couple of years ago, the usually have THD bellow %5, and are decently built, and most places I found named it as the only Chinese generator that would spend money on. I run my regularly for testing and sometime run yard tools from it to put some load on it. I've only used it for real after Irene, although I was fine and never lost power, a bunch of people I knew had no power and basements full of water so I ran around with a generator in my SUV and pumps and emptied basements. Worked like a charm. I wouldn't chance electronics on it, just to be safe and the odds are that its power output would start getting dirty as it would approach its full power. I also know someone living off-grid in Hawaii running their entire family needs from one of the Champion 2000w inverter generators. The alternator part gave out after 16 months of daily use for powering everything from freezer to computers to water heaters. Part was replace and they are back in business. I'd say that's damn good. Don't underestimate your car either, its a giant generator. Get a couple of inverters for your car/cars and you have another source of power.
-
tumbling AFTER loading?
No, that article says "Extensive tumbling can cause the breakdown of the powder grains". Define extensive? Hours, days, weeks? You need 10min to remove the lube. That article also doesn't quote any non-lab cases of powder breakdown. Put a factory box of ammo on a train across the country and it will get significant shacking for many many hours. Or on a plane on a 12h flight, etc.
-
tumbling AFTER loading?
I don't feel the need to do it, but lots of people do, specially with rifle ammo that may have lube on it. I've had rounds that have spent a hour in my dryer and worked fine. I don't think 10min in a tumbler will do anything to it. Everyone who wants to say it is a bad idea, please provide some evidence. That said, I would figure out what is the minimum amount of time you need to remove the lube and limit yourself to that, I'm sure if you forget about it and tumble it for a few days the powder could break down a bit. I might even use a plug timer, but I don't see the danger.
-
Thoughts on Baby Eagle?
The Baby Eagles are nice guns, based on the CZ platform, but they are different enough from the CZs that parts are not easy to find. If you like the design look at the CZ's, they make a very interesting .45 as well, although a bit different from the rest of the line up, the CZ 97B. That is somewhere in between the CZ75 and the 1911 designs really.
-
Why do different bullet types have different load data?
Such as? Hmm .. really?. I'm using the the data from Hodgdon's website here for .357 125gr Lead using 6.8gr of Universal results in 1401fps at 34200 CUP 125gr XTP using 7.1gr of Universal resutls in 1394gps at 34900 CUP 5% more powder resulting in 1.4% more pressure. The lead load is higher pressure for 9mm 115gr LRN 4.3gr Titegroup 1151fps 30500 CUP 115gr GDHP 4.5gr Titegroup 1135fps 29500 CUP The GDHP uses MORE powder for less pressure. In both those cases the jacketed round is also a hollow point so all other things being equal (they are not exactly equal, OAL is a tiny bit different) they would be deeper in the case taking up more volume and increasing pressure. I'm really curious to know what source you have for lead being more slippery as I have a really hard time finguring out how a soft metal moving under pressure over rifled barrels would put up LESS resistance then copper. Hmm. Depending on a the bullet and barrel gazillion is a large number. Jacketed ammo wore out the barrel in my CZ in about 50000rd to the point that accuracy suffered. You can wear out steel with human skin eventually so lead will wear out barrels too, just a lot slower, but certainly not never.
-
Sticker durability on ar15?
If you want actual customized paint jobs, that is completely different then stickers. People have done amazing things, here are some pictures what can be done, but we can assume they practice a lot on something else first. Stickers won't last.
-
Colt HBAR
Yep barrels are relatively easy to replace with a couple of tools.
-
Sticker durability on ar15?
Depends how much you plan to use it. I have a hard time keeping the anodized finish on my guns, if you are going to only use it from a bench odds are you will be ok. If not, replace them.
-
N.J. Proposed Game Code Amendments for 2014
Yeah well, apparently certain purists would rather you have a harder time getting an accurate hit and maybe leaving an wounded animal then using a weapon designed 600 years ago. I find it absurd, and I use a standard compound bow.
-
Colt HBAR
Well, based on what people who shoot match barrels in .223 do to their barrels, about 4000 rounds seems to be when they change them. Mind you, I said this is depending on what you want from it. Not everyone cares about sub minute groups, and likely if the barrel was good to start with it will be good for a lot longer. I just assume if buy an HBAR Colt you do it because you want to shoot some specific type of shooting. I wouldn't worried at all about 2000 rd on a general purpose AR. I would however wonder if that number is real, you never know.
-
Just because I'm curious, why are mini-14s so expensive?
I guess I don't own real ARs