Everything posted by Vlad G
-
Are NJ's gun laws getting repeal'ed
Well as a rule of thumb, they are actually allowed to put things on the internet that aren't true. I would suggest that if something sounds to good to be true, and probably also highly outside the legal authority of the governor, odds are it is probably not true.
-
How to have a longarm serial number traced to insure not stolen?
TBH, the same is true with any used firearm, one bought from an FFL as well. How do you know that used 870 the dealer bought from the old widow wasn't used to whack Jimmy Hoffa, Waldo, 3 nuns, and bus full of prostitutes? You don't. Theft however is a bit different, assuming the person who lost it has reported and had the serial number and the state didn't lose the information. Or it could be that the buyer is contemplating his first FTF purchase and is a bit apprehensive on general basis, because our laws are so oppressive one feels slightly guilty for even considering doing such a terrible as thing as legally purchasing a gun from another person.
-
Are NJ's gun laws getting repeal'ed
Right, because he took unilateral executive action to make and unmake laws that won't be complete abuse of power and an offense that would get him kicked out of office. Stop wishing for kings, even if they are "our" kings.
-
Questions about rust-bluing, advice, how to, etc.
Have you considered using bake on finish? You could get it ceracoated or do some of the equivalent at home treatments. Personally I don't like bluing on guns that get used a lot as it scratches, still rust, wears out, etc. Plus it looks to me like you have some pitting here and there on a receiver which doesn't really matter but aesthetically they bake on finish my hide them better.
-
January 3-Gun, Old Bridge
Keep in mind round counts in 3 gun are funny things. Bring at least double. Worst case you can bring it back home. I dunno how Jim counted, but very often you only NEED one shot per target to neutralize it if is an A so .. are you only going to shoot it once, on the move, at speed? For example, my stage alone says 8 pistol targets, 9 shotgun targets, 10 rifle. You are probably going to use 16 pistol 10+ shotgun and 15-20 rifle. Then there are the longer range stages. Maybe it will be only 8 hits required, assuming you don't miss until you run out of ammo. So yeah, bring at least double. Maybe triple.
-
New Vortex 1-6 optic
I guess. I usually eyeball lead moving targets, usually that works, but I can see the need at times.
-
New Vortex 1-6 optic
Personally I think on a 1-6 scope the focal plane choice is completely irrelevant. 99% that scope if going to be at either 1 or 6, almost never in between. You are probably only ever going to care about the ballistic "maths" of the reticule at the 6x, because with a 200yard zero you are pretty much going to be putting the dot on the target and pressing the trigger between zero and 250. Past that you are going to be in 6x anyway so you need the "maths" to work at the amplification. The more interesting part is how you light up cheap scopes. One of the big downside to most scopes under $700 or so is that the illumination is not really daytime visible. For that reason you'll see a lot of the scopes in that price range light up a big part of the reticule (like this vortex) to get a lot of chances to get light to your eyes. Also you'll note they tend to have some form of circle/dot reticule to give you something bit to aim with quickly. The brighter ones tend to have a single really bright dot and act like a RDS (the more expensive Vortex, Meopta K-dot, Burris XTR II, Z6, etc) BTW, I think the approach is clever. I wish my Razor had the 100yard nub like this one will. The new one is basically the JM-1 reticule plus a 100yard nub, plus a big circle for close up. I do kinda like it, although obviously I'd prefer a bright dot to the circle, but I'll take the circle at that price point.
-
New Vortex 1-6 optic
I have serious misgivings about how much glass you can get for that money. Something somewhere has to be made very cheap for that price point. I'd probably pick one up for a .22 upper so it somewhat matches my more expensive glass, but I'm going to be hard to convince to trust it.
-
Law Tactical folding AR stock
When it is unfolded, you have a semi-auto rifle that can have it stock folded so .. yeah don't try stretching the wording to much.
-
The Best of the Worst Red Dots
With Primary Arms and Vortex around there is ZERO sense in buying any of the trash brands, PA and Vortex are not much more money, really work, really hold up and in the rare case were they don't the companies stand behind the product.
-
Uh Oh! Somebody messed up...
Err .. if I see an RO who doesn't do that I remind them firmly. If I see a shooter who wants to rush they don't leave the line until they cleared the gun in a way I can see it. Im my experience most people are pretty good about that one.
-
Uh Oh! Somebody messed up...
This is a solid writeup: http://www.recoilweb.com/viral-video-unplanned-targets-61237.html
-
Uh Oh! Somebody messed up...
That cool. Ask them when they plan on running 3gun matches again.
-
Uh Oh! Somebody messed up...
No, you are incorrect. The correct command is STOP. USPSA: http://www.uspsa.org/document_library/rules/2014/Feb%202014%20Handgun%20Rules.pdf rule 8.3.5 IDPA: http://members.idpa.com/Content/Rules/x2gukat1.wyt.pdf rule 2.3.1, 2.9, etc 3GN: http://3gunnation.com/regionals/rules_awards rule 12.4 I could go on, but in ALL practical shooting sports the correct command is STOP. What you were taught at different schools is irrelevant, as this was competitive event and if there is one thing that all action shooting games have in common is that. I'm not being mean or rude here, but it is very important that people know the rules of the games they are playing and the commands involved.
-
Uh Oh! Somebody messed up...
The command correct is STOP. It is short, clear and can't easily be confused with other things and even the lizard brain can figure it out. It also means the same thing in a number of languages which helps when people are non-native speakers and translate stuff in their head.
-
Uh Oh! Somebody messed up...
Rumor has it the guy picking brass is very hard of hearing. The bad news is this sort of thing happens, but not very often. This is the WORST I have ever seen or heard of, and we shoot a LOT of stages every year around the country. I will confess that as an RO I've made a similar mistake once. The circumstances were different, the stage much more difficult to visually clear (through the woods and valleys), and no shots were fired, but as an RO it was entirely my mistake, my fault, and my responsibility. Since then, if I can not see the ENTIRE stage from the start position, if I have the timer, I make sure to be the last person walking back from the stage before I start the next shooter. I'm not sorry this was posted. There are 1000 videos out there of people doing really dumb ass stupid things with guns, this isn't one of them. This is an example of what can happen when you aren't being an idiot but lose focus. It needs to be a shown at every RO class and at the start of every match on a big screen projection screen. It is all fun and games, but we need to pay attention.
-
Old Bridge 22 and 29 March
To be fair he also beat me. I really need to get my gun to shoot where I point it.
-
Beyond the M4A1.....
I agree that this is mostly request for improvement of a few accessories, not of the rifle core. The trigger bit makes sense to everyone. The rest of it seems to be about getting a better way to attach crap to the rifle. The short 9" handguard full of crap glued to it is horrible to me. What they would get from this is a free floated handguard which is a biggie, less weight (or they should), a modular attachment system, a folding front sight, a better muzzle device and a better charging handle. Basically they are fixing exactly what every AR owner fixes on their factory guns. I view this as a realistic set of goals. However, if they do follow through, it may nix any future change to piston uppers because if the hand-guard is not sized for it it won't fit. To me this is fine, there is nothing wrong with DI from my point of view. I do agree that firearm technology is getting very mature. Short of moving to laser beams (which are a bad idea for many reason btw) we can only pack so much energy into a package so small. Most of improvements now are in accessories, optics, ergonomics, etc. This is not a bad thing, people are actually focusing on polishing the small things and there is a HUGE other issue from a 2A standpoint, post Heller. If we had a technological revolution in weapons, say 40MW plasma rifles, they wouldn't be in common use, would they?
-
Old Bridge 22 and 29 March
Shut it, you. Revolver shooters don't get to have opinions about slow The reality is that 3gun stages are longer, and reset is longer. On the other hand there is a lot more shooting, when stages are 30-120 seconds instead of 10-30 seconds you are getting a lot more trigger time per match then in a USPSA or IDPA match.
-
Dick's (Mays Landing) shelves EMPTY !
And you forgot that part on how in the first few years it will put a bunch of small shops out of business, so when it does close down and vanishes there will be desert of whatever they chose to sell as there won't be anyone in the area selling it.
-
Old Bridge 22 and 29 March
There is no real way to predict that. Assume 5pm. It will depend on number of shooters, weather, final stages, etc. 3gun is always a bit slower anyway.
-
Walther PP - Barrle dings - Fail to eject ?
I find that odd, I've used it on metal and wood with no side effects. Yes, I've used it diluted, start at maybe 1/4 purple power to 3/4 warn water. Soak the gun for 10 min or so then use an old tooth brush. I wouldn't soak he plastic bits. Again, its been a decade plus since I've done this. I recall no chemical burns although being an aggressive degreaser it can chap your hands so wear some kitchen gloves. Personally I would use that before gasoline which does terrible things to my hands. BIG CAVEAT: you are about to use chemicals in probably off-label ways. Do as much research as you can and use whichever method you feel most comfortable, not whichever method I felt most comfortable with.
-
1911 Idiot Scratch Removal
Not really. If you use your guns long enough, you'll take them apart with no tools in the middle of a match or a class or whatever. You are going to assemble it in a rush and you are going to scratch it. On a collectable or BBQ gun I can see why someone might care. On a shooter gun, like a mil-spec, I wouldn't even remotely care. In fact, I'm pretty sure my milspec is scratched in every possible way, that one included. This is what my magwell looks like after the third time it has been refinished Most scratches are honest wear, unless you decide to carve your name on it with a pocket knife, I personally consider assembly/dis-assembly wear to be honest wear. If you really want to make it perfect, that's fine too, all I'm saying is don't let the internet convince you that somehow a scratch in a certain place is worse then a scratch in a different place. If they tell you that a scratch there is a sign that you can't properly assemble the gun, tell them it is a sign that Browning screwed up and built a gun that gets scratched with normal assembly and dis-assembly... stand back and watch them sputter
-
Old Bridge 22 and 29 March
Yep, I went and checked. Most of the pits are clear, 3 is almost clear, 6 is not perfectly clear but usable and stuff was still melting when I left. Be careful on the range road though, snow is gone but the road is pretty rough with potholes so take your time, don't treat it like a rally stage or you are going to change a flat.
-
1911 Idiot Scratch Removal
Just shoot it. If you do shoot it it will acquire other scars anyway, its called character.