Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. Correct, in production you can't change the caliber, however it is the dumbest rule we have. If you took your 22 and made into a 17 as far as I'm concerned you turned a production gun into a different production gun. At a local match I have no issue with calling that good enough for production division.
  2. My wife has a 20ga 870 Youth. It fits her but what we have discovered is that whatever recoil you lose from the smaller 20ga you gain back because most of the 20ga guns are lighter. I think go with a proper fitting 12 is the answer.
  3. Well it has a low rate of fire. Maybe with a decent comp and some practice you could . Nothing is perfect
  4. If you never seen Way of the Gun, you should, it has a number of very good gun fight scenes, they had professional help making that movie. Here is one as an example:
  5. I have one I picked up off a prize table. A) That is an awesome price B) It is a bit strange to install. Every other trigger group I was able to slip under the safety, for this one you have to remove the pistol grip so you can pop out the safety so you can drop it in. Not a bid deal, just a bit odd. The other odd thing is that it is REALLY loose on the cross pins, but then it has two set screws that the whole thing up to tighten it and it becomes rock solid. I installed mine with KNS pins because why not and I had the pins. C) Trigger is very VERY nice. I shot a match or two with it and then I when back to my Geissele 3G-SD because I like it better for competition, but I plan to build a new lower for my "zombie apocalypse" rifle and I'll be using the Timney in it. It is really a very clean single stage trigger that does indeed remind of Timney's bolt action triggers. There is almost not take up, just a firm wall and a clean break. D) the weight is a bit odd. I didn't trigger gauge it, but I'm not sure they are honest with the weight. I have one that said 3lb on the label, but it feels heavier then that to me. Maybe it is because of the lack of takeup so you kind feel all the weight at once, I dunno. This might not be a bad thing, it is unlikely to fire it by mistake. I like it. I'm not sure I like enough to buy one vs something else, but that may be because I prefer two stage triggers, but it is certainly a very nice trigger and PA's price is very nice as well.
  6. All of the above is correct.
  7. The problem with Heat is that its like 30min of actual movie wrapped in 2h of panoramic shots of LA
  8. Vlad G replied to Lecky's topic in Handguns
    I was gonna say glock 19 and I don't even own one or want one but then I remember that the Sig brace and AR pistols exist ...
  9. Normally we use Word/Powerpoint and dragging in various pictures from a library of such things. If anyone wants my collection of templates and "clip art" PM your email address. However I do accept stages in any format, hand on heart, we used to have some designing stages for us on Quick Check napkins in the morning of. Clearly I prefer a word doc or a pdf, but starving men don't turn down roadkill.
  10. Shit man, I'm just glad they don't all shoot one handed and curving the bullets. I could fit small moons in the spaces between the movies with decent handling of guns. Let see ... Ronin, Heat, Way of the Gun, Collateral and maybe Open Range?
  11. Thank you, so far I have a promise of a stage, a stage that was mail to me as a JPG of a computer screen and my sunny attitude, so everything helps:)
  12. Not gonna happen. First of all I think the ATF would have a cow because would be trivial to make FA even if starts SA Secondly, sure it can fail to mechanical, but what it fails to full auto? What if you get crud between the contacts that either blocks it or sets it off unexpectedly?
  13. Unless the gun is modified in a very funny way, that doesn't look like slidelock, but maybe I'm wrong. If you zoom in you can see the bolt itself protruding from the shinny carrier, it is nearly all the way forward, maybe 1" or so away from the barrel extension. I suppose they could use form of very short stroking blank fed from a modified mag or something.
  14. Thats a solid grip on that handgun, but his rifle is jammed
  15. Vlad G replied to 555R's topic in AR Discussion
    Well, he wants to make his gun shoot softer and he was led to believe that the gas tube can help that. In reality, as raz-0 said, the pressure is too high and the dwell time to long to solve the problem with a longer gas tube alone.
  16. Hi folks, registration is open: http://cjuspsa.coffeecup.com/forms/CJ_12082013_Form/ I also need stages, so far I have a promise of one stage, and I'm getting nervous.
  17. Vlad G replied to 555R's topic in AR Discussion
    Diameter is not the issue, making the tube wider wouldn't help, plus it may not fit. The diameter at both ends can't be mucked with because it still has to fit the gas block and then fit through the receiver and gas key. At most your would get an expansion chamber in the middle and I suspect that would be a bad idea for timing and consistent pressure reasons. Realistically you have a couple of options, none of them cheap, if you want soften up recoil 0) Get a really good comp. 1) Get a new barrel with longer gas system, either midlength, intermediate, or rifle. Hard to make rifle length work reliably on anything other then 18" or longer. 2) Get an adjustable gas block and control the volume of gas the source, but that means taking off the muzzle device and installing a new one because as far as I can tell none one makes a two piece adjustable gas block. 3) get a lighter weight carrier/buffer. Ideally you do all of the above combined.
  18. Maybe. I've ripped up a few sights, specially front ones, over the years. For ever single case I've done that I'm not sure built in sights wouldn't have take some significant damage. Granted, this was on semi-auto guns, and some revolver sights are a lot beefier.
  19. Ah. Interesting. I would imagine with comps getting hot and expanding and contracting eventually the pin would work loose, but I guess not.
  20. Sorry, what is an "spl pin"?
  21. Paint the whole sight black first. See if that works for you. If not, then add a bright colored stripe on the center of the front sight. That's what I would try, but everyone's eyes are different.
  22. Slight thread drift, if you don't weld over the pin, what keeps it from just working itself out?
  23. Get the 686, and I say that as someone who doesn't own a single revolver or care to. You already have a rifle, the Saiga would add a second string to the AR, you are never going to shoot both equally. I've shot Saiga's, they work but they are meh. If they ban Saigas, they won't let you keep it anyway What you really want is a 686 but you keep getting distracted. Well .. stop that. Focus, buy the 686, and see what you really want to get as the "next' thing.
  24. I find this amusing in this day and age when you stream almost any movie at any time.
  25. You want 3 gun rules, where very often .223 requires 2 hits but .308 is fine with a single hit.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.