jeklog

i just hope mr lautenberg does not get terrorized by a bad guy with a gun before he changes his mind! those people that were killed in tucson and carson city would have had a fighting chance if they were carrying a firearm. god bless there souls. good to be able to defend your life and your family at home, but if your outside your home like those said victims and firearm is lock at home, won't do us any good i guess. less cops on the streets + more criminals unlawfully carrying firearm, nobody wants to be the victim!

congratulations!

gaston out till your clock out! i mean goodluck!

good morning all!!! hehehe very nice diagram, in my case when i read patriot oaks problem. i went to look at my g19 gen3, normally i don't really touch anything else but cleaning the barrel slide and brushing surface a little bit. while i was trying to see what could be patriot aoks problem, i was inspecting whatever i see, i was able to push the metal part connected to the trigger (i believe its number 18 and if i am not mistaken called the trigger bar?)it went forward and number 21( i believe this is the connector?) move to the right when 18 was move forward. after this happen number 21 top part will be obstructing the slide number 17 will touch the top portion of the connector 21 which will not make the slide go back to finalize your assembly. by pushing the only part that you see of nuber 21 towards the left, it will pop now 18 and 21 are side by side and top part of connector not blocking 17 part of the slide from sliding all the way back. i was thinking that this is what happen to patriot oak. my trigger is also in the pulled position. hope i could help and not cause confusion. have a great Sunday to all!

i was thinking he pushed the trigger bar a little bit, if he did it pops and makes the connector slightly block the slide from sliding back. he has to push the connector towards the left if his looking at the rear of the gun, then it will pop connector and trigger guard are side by side now and the top part of connector won't be blocking the slide from slide all the way back into place.i actually thought i will have the same problem his having when i looked at mine this morning.

if the trigger is pulled and the slide will not slide back properly into place, push the connector towards the left side of the gun if you're looking at the gun from behind, if you push the the connector it will pop into place and you can slide it without a problem with the trigger pulled. goodluck!

good morning! if it is your first time to purchase, i would go to local firearm stores. as long as you have all your paper work, i'm sure they will help you out with your questions and purchase. if you are stll shopping and can't decide, like the other folks here in the forum would suggest that you go to a range/gun store where they rent out guns for you to try it first. this will help you decide which firearm to purchase. (FID, coe-long gun purchase. permit to purchase a handgun,FID-to purchase a handgun.) goodluck!

did you figure this out yet? if you didn't, i might have an idea why you couldn't put it back together!

This is my Glock, there a many like it but this is mine! lol

just be patient, think about your family, don't think about this people to much cause it will piss you off more and quick. security cam, great idea and like the rest of the guys said to document everything that pertains to this individual. keep your family safe, don't get yourself into troublr so you can be around to protect your family. be smarter than the people upstairs! off the record: hope your wife have a lot of patience too, you don't want her playing with your guns and saying hello to them people upstairs! goodluck!

you've just shared us how much you love your daughter!!!godbless you and your family!!!

FYI, just read this at the meltzers sporting goods website . News FEDERAL & AMER EAGLE product safety Please as we do not have any further info on this warning, please refer all further questions to Federal. FEDERAL and AMERICAN EAGLE 45 AUTO PRODUCT SAFETY WARNING Immediate Action Required FEDERAL CARTRIDGE COMPANY • 900 BOB EHLEN DRIVE • ANOKA, MN 55303 • PHONE 763.323.2300 • Toll Free: 1-800-322-2342 Certain lots of recently manufactured 45 Auto ammunition may contain an incorrect propellant charge. Use of product from these lots may result in firearm damage and possible serious injury. DO NOT USE PRODUCT FROM THE FOLLOWING LOTS: 38X628 through 38X765 38T401 through 38T414 If you have in your possession any 45 Auto with the following brand names and part numbers, check to see if your ammunition package contains the above lots: American Eagle® (AE45A, AE45N1, or AE45A250), Champion™ (WM5233), GoldMedal® (GM45B), Hi-Shok® (45C, 45D)and Federal® Personal Defense® (C45C, C45D). THIS WARNING APPLIES ONLY TO THE LOTS LISTED ABOVE. If you possess ammunition from any of these lots, or have questions concerning this warning, please contact us at 1-800-831-0850 or 1-800-322-2342 and ask for Product Service. Federal will provide replacement product and will cover the cost of returning the affected product. We apologize for any inconvenience this may cause. . Beretta Neos RECALL RECALL NOTICE – BERETTA NEOS PISTOLS Beretta U.S.A. Corp. has discovered a potential condition with Beretta .22 caliber NEOS semiautomatic pistols in which the pistol will fire even if the safety is activated and, in some cases, the pistols may fire if the safety is moved from the OFF to the ON position. Chances of either of these situations occurring is extremely remote and no injuries have occurred because of this condition, however, because of safety concerns relating to this situation, Beretta U.S.A. Corp. is immediately implementing a recall of Beretta .22 caliber NEOS semiautomatic pistols. Instructions on how to send your Neos to Beretta is available at www.berettasupport.com/neos or by calling 1-800-BERETTA. Note: Some pistols are not subject to recall. Please visit www.berettasupport.com/neos to see if your NEOS has already been repaired.

congratulation, hope you get to shoot it at the range soon!

i recently purchase a glock 19 gen 3. i agree with the guys that saying you should go try to shoot them first, it will help you decide better. incase you don't know yet g19 gen 3 and g19 gen 4, g19 g4 will have 3 different backstrap you could choose which ever feels good on your grip, g19 gen will not have that option. goodluck.

honda motorcycle place will carry honda generators, i think bergen honda in saddlebrook. motorcycle place on route 17 south bound in ramsey carry yamaha, sears has 5000 watt for $599 costco sells champion last i was there. goodluck

22lr onsale at dicks 525 for $16.98

congratulations!!! nice looking firearm! besafe!

do you really have to go to this place even if a hurricane is on its way? maybe you should postpone to avoid problems on your vacation and for your own safety and everyone whos coming with you. if you still must go for other reason and you are not breaking any law if you bring your firearm, i say bring!

Congrats! besafe!!!

congrats! hope you get to the range so you get to shoot!!! be safe!!!

Thank you!

good evening! passing by another local shop, people were really nice and helpful. been hoping really for a glock 22 gen4 but decided to take a glock 19, a compact and not a gen4. i am happy with it! would like a full size glock, but i guess it won't be the first and last purchase. i took it home with me and can't wait to hit that metal plate, Thank you for your replies,ideas and suggestions everyone!

hey guys thanks for the info really appreciate all the help.

Thank you much for this info! i guess the person that i spoke to, didn't try to help me at all, i am probably waiting for a phonecall that will never happen. thank you sir!

I am trying to get a glock 22 gen4