Rob0115

I’m not bitching, not really, and it ain’t over lugging stuff. It was an issue that I almost couldn’t fix without real time and expense. She was touching up walls with the wrong paint and I don’t have the original custom color we used. I was very clear in the contract that I wouldn’t fill nail holes from hanging or touch that up. My wife knew this, didn’t listen, and lots of fun ensued. Thanks the guys at Riccardi paint in Parsipanny I was able to cut a piece of the wall out, they colored matched it, I patched and repainted all of the mistakes. A whole Saturday shot for a problem that wasn’t necessary. My frustration was my wife’s lack of understanding the gravity of touching up paint that covers an enormous connected sections of the house. My real frustration is that with all the work to do I didn’t need to torch all night and today dealing with something not in the tight schedule.

I've been biting my tongue so much there's a hole in it!

I’m working with my wife of 25 years to pack up the family home of the last ~20 years. I’ve never understood more that men and women are from different planets than I do right now. I was watching this old video before blowing up with frustration and it made me laugh. I’m sure many have seen it previously, but it really does capture the differences that have never been more evident to me than they are right now.

I think there is enough room for more ranges. I just saw this same one being discussed posted on NJ.com http://www.nj.com/passaic-county/index.ssf/2017/09/huge_gun_range_gives_former_burger_joint_new_shot_at_life.html#incart_river_home

You’ll never swap back and forth. If by milling you mean mill the slide for an RMR the I’d replace it. The work is expensive. If you are not looking for that then just cut up the one you have. I love decorating me some glocks so get busy and let’s see what you come up with.

Just shoot wheel guns--problem solved.

I was going to point out section d questions 24-28 is all the data on the firearm.

He said earlier he was going for the Glock version. However, that may have changed.

There are insanely long threads with insanely long detailed posts, by me, on not having a matching d/l and FPID. I won’t rehash it here but I’ll simply tell you that anyone who says they need to match is full of shit, misinformed, doesn’t understand the law or just plain wrong. You just need to reside at the addresses you provide In other words it’s not an excuse not to update FPID if you no longer live at the address on it. If you live in two states everything is fine. Your state of residence on any given day is the one you are in. Read form 4473 it’s all in there. Thanks to Smokin .50.

You claim you reside in both states you can buy and own guns in both states. I do now, thus I don’t understand why you see this as a problem. BTW, an out of state FPID doesn’t make it legal to keep the guns at your parents. You need to claim that you live there part time—which I assume isn’t an issue. There is no benefit, only limitations, to getting out of state FPID.

I have a FL drivers license and an NJ FPID using my N.J. address. To OP why do out of state? Change address to parents if you want or you cannot get pistols.

Anyone try the Rinnai tankless hot water system?

Hopefully my new G17 is less buggy than my Sig 320 I bought a few months ago.

www.dillonprecision.com.

I bought a 17 today....made me happy. I’m guessing he’ll Have a change of heart.

A major refinery is offline.

I have a bit. I probably have 150 rounds through it. Im using 107 SMKs with XBR8208. The cartridge is quiet and 0 recoil. I’m still trying to improve my shooting at this point. The rifle is outshooting me. I’m trying to mix in a bit of time with my bolt 6.5L.

I have a 6mmAR and prefer it for precision distance to the Grendel. 6mmar reloading only. You can get lapua Grendel brass for a buck a piece and either get a 6mmAR sizing die or a bushing die for sizing to 6mmAR. You can buy the upper at 6mmAR.com or Young’s gunsmithing, assembled mine and frank’s, in Montana can ream a 6mm barrel and assemble it for you. I got my ar barrel blank from barrelman in Texas. It was a relatively inexpensive upper build all in all. Consider it tooted.

My next precision will either be .223 or 6mm lapua.

If there good it’s a great deal.

How are the Glock night sights? I’ve always installed trijicons which might be pricey for a paper puncher.

From where?

I canceled my quite some time ago after all the delays. I feel the same as you do in the gen 1 deal.