FishNJ

my wife just told me about this today. apparently happened last night. i didnt see any other posts. 30 yr old hoboken husband shot in head and died while carjacked at short hills mall. http://www.nj.com/essex/index.ssf/2013/12/man_dies_after_being_shooting_outside_short_hills_mall.html

i did the same thing this week on my MK III. installed the Sam Lam bushing to remove the mag disconnect. noticed a big difference in the trigger also. next im going to do the Volquartsen sear to see if that lightens up the trigger.

Ruger Mark II/III

AR. With the right buffer all you hear is bang and feel nothing.

is it the biometric one or the electronic lock?

my understanding for handgun transport... PLEASE correct me if i am misunderstanding. WHEN LOCKED IN THE TRUNK - must be unloaded - can be in range bag - can be with ammo WHEN IN THE MAIN PASSENGER COMPARTMENT (or accessible cargo area like an SUV) - must be unloaded - firearm must be cased and locked (see below), separate from ammo - ammo need not be locked. Do the internal locks on handguns count? I believe for inter-state transfer, they must be secured so they are unavailable to the driver/passenger, so cased and locked. I would apply this to transport in-state when placing in the passenger compartment.

charlies in kenilworth...

drill out the rivets on the storage tubes and they come right off. follow the no-drill method in the post above. re-rivet, or replace with small machine screws.

Wideners has LBR lowers in stock and shipping per the email i got last night... $99

RTSP?

however, no P2P is required if you inherit them down the road.... 13:54-1.13 Firearms passing to heirs or legatees (a) Notwithstanding the provisions of this subchapter concerning the acquisition of a firearm, a permit to purchase a handgun or a firearms purchaser identification card shall not be required of an heir or legatee for the passing of a firearm, upon the death of its owner. A person so acquiring ownership may retain the firearm if he or she meets the requirements of N.J.A.C. 13:54-1.5 and 1.6. (b) If an heir or legatee is not qualified to acquire a firearm, he or she may retain ownership of the firearm for the purpose of sale for a period of 180 days, which period may be extended by the chief of police or the Superintendent. During such period the firearm must be placed in the custody of the chief of police or Superintendent.

Gun buybacks? look for the grandmas... LOL That piece is sweet!

Thanks guys. Yes, right now it will probably be mostly range. I hope to use it hunting down the road. Fully understand about barrel twists, and that might be a compromise i have to make up front, or wait for my father/brother/brother in law to man up and get one also. they are lurking reading this. I appreciate the offers to get together. Definitely not opposed to driving, just need to find the the time to go. lots going on right now. i'll be in touch sooner or later. Minnie/Maxi balls - are they a reasonable compromise between PRB and Sabots for a 1:28 inline? Buy in bulk online? I think part of the initial appeal to get into ML was the Triumph and how easy it was to remove the breech plug. Are the bolt actions or drop triggers just as easy? Cleaning? Like I said, I want to get something that is easier to learn with and wont be a turn off. Like the 22LR of muzzleloading... I read about the knight disc also. seems good for rainy days. Any downsides to the little holder? some folks upgrading the breech plug to reduce blowback?

Went for my Hunter Education class this weekend at the Clinton WMA with my father, brother and brother-in-law. Did shotgun and rifle/muzzleloader, got a perfect score on the exam. All of the instructors were excellent. The range session for muzzleloader was my first time shooting a newer inline. My only other experience was shooting an older percussion cap when I was in scouts about 20 years ago. They provided T/C Triumphs. I have to say that we all thought they were a blast (pun intended). Now of course, I have to get one, and am looking for some input. From what I've read, the Triumph is a great way to go. I also saw a T/C Omega Z5 starter kit for a very good price (I think). Initial use is for the range, practice, familiarity, but i can see myself using it occasionally for hunting a few years down the road. Need something easy to clean (yeah right) so I am not hesitant to use it when I want to. No opposed to anything used either (hint PM me). What do you think? Thanks for the input.

buy the stripped lower in a local shop, and if you have the patience, wait for things to slow and order the rest over time... ive seen lowers in NJ shops for $125

Armalite makes the clamp on FSB. they even have it without the bayonet lug. http://www.armalite.com/ItemForm.aspx?item=EU0240MPKIT

Beam and Makers just picked up a bottle of Tito's 6x distilled vodka... i've heard lots of good things... 1.75L for $35

Free shippingto United States Via CHINAPOSTAIR 11-31 Days NO WAY

we're coming up on that same descision in a few months... have a certified 07 328xi that has been pretty good, but im getting nervous since the certified warranty is up. only major issue was the transfer case at 75K that was covered. didnt cost me a dime. i had a 2010 vw golf tdi that got crushed in Sandy. loved that car from the mechanical side. 45mpg without blinking. fit and finish left something to be desired. i have a 2011 gmc terrain that is ok. i have the 4 cyl awd. average around 22-23 mpg about 50/50 highway city. im thinking about a a 2010 A4, but am looking for ideas also. prefer awd, but am open it ideas. thanks

couldnt be easier. nice meeting you today. thanks again.

Easy transaction. Thanks.

it really only matters to the buyer... if you land anywhere near $200, you both make out well, with current prices... assuming a stripped lower... you can always search completed auctions on gunbroker to see what you could potentially get... just another (reality ???) check

keep both lowers and the upper that is better suited for the ammo you intend to shoot. with the YM BCG. i cant say that i would put one above the other just on mfg. depends on your use... but dont give up the 2nd lower.

Back in stock. Just ordered 2. http://www.midwayusa.com/product/388400/ar-stoner-magazine-ar-15-223-remington-10-round-with-anti-tilt-follower-stainless-steel-black?cm_cat=CheckoutConfirm&cm_pla=ProductDescrip

have a girl friend from high school that went and put in for her FID and a P2P. her husband put in for both also. I returned the completed reference forms to the PD last week and they go for prints 1st week in Feb. looking forward to taking them out for the same type of experience