DTtuner

Got a great price on the RRA 2-stage, with LPK included.

I really like my Burris MTAC 1-4x. Crystal clear glass, fast transition from 1x to 4x (with cat tail). Although it only weighs 17oz., it's just a bit too heavy for me, with the PEPR mount. Rather than sit on my rifle, it sits on the shelf...

Thanks. It's definitely built as CQB as NJ will legally allow This will be my first 2-stage match trigger, so I'll see whether or not I like. I'll be able to do a direct comparison with my DPMS 1-stage.

Agreed. The only way NJ will allow CCW is via a supreme court decision.

Thanks Krdshrk. I purchased the MOE stock, Grip, Trigger guard all together in a bundle deal. Also, not sure how much the STR weighs, but I always have minimum weight in mind. One of the things I love most about the AR platform is how light it can be built.

I've said it somewhere in the past... "I'll never own more than one AR rifle." Oops... Once I saw the Spikes Tactical 14.5" with Dynacomp Upper... It was all over from there. I'd like to see what the hardcore AR guys think of my 2nd AR build. My first didn't go over too well.. and I realized after the fact that my #1 build was on the cheap side of AR builds. For the record.. it's been reliable as heck. ZERO malfunctions with approx. 500 rounds through her. (delton complete upper, cmmg lower, ace stock, dpms lpk) Here goes... UPPER: New in Box Spikes Tactical LE Complete A3 Flattop AR-15 upper - part # STU5015-MBD Carbine Gas system Chambered in 5.56mm. 14.5”, chrome-lined, 1:7 twist barrel and extended M4 feed ramps. Spikes BCG Pinned Dynacomp muzzle device Magpul MOE hand guard. Upper also comes with Spikes ST-T2 heavy buffer. LOWER: No Lower Receiver yet, but searching for Spikes Spider Lower, with bullet markings (no color) RRA 2-Stage Match Trigger w/RRA LPK Magpul MOE Grip Magpul MOE Buttstock (pinned) Magpul Enhanced Trigger Guard Standard CAR Spring, milspec Buffer Tube Spikes ST-T2 heavy buffer BUIS: Front A2 site post. Rear - not sure yet. Magpul BUIS? OPTIC: Aimpoint PRO =D I have a Burris MTAC 1-4x scope, with Burris PEPR QD mount. A bit heavy for my tastes... not sure if I want to use it. Any suggestions, comments, drools? Ty.

Sold? I'm interested.

Post a pic. Good price.

You mean who ELSE...

Thank you triplecrown! I appreciate the comments and Bump. This carrier is definitely very high quality, and "military spec." As a result, it's too bulky for my mall-ninja uses. This carrier is more suited for "Duty" use: LEO, or Active Military

*SPF* to Loco

All 6 for $20, shipped. Like-New, with no marks, damage or scuffs. The original Magpul "ranger plates." Fits any AR15/M16 magazine (Magpul PMAG, EMAG, USGI Steel Mag, etc.) When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. Made in U.S.A.

DIAMONDBACK TACTICAL PRAETORIAN: $ 80, shipped ** Carrier was purchased new, and never worn. Mint condition, with no signs of wear. One of the most versatile ballistic plate carriers you can find with the best USA made quality! Manufacturer - Diamondback Tactical/Battlelab Manufacturer Part Number - C-PRAS-MED-ACU Medium (170-230 lbs., 72" or below in height) BATTLELAB® PRAETORIAN™ RAPID CUTAWAY BALLISTIC VEST Included: Carrier Vest (F/R panels), Cummerbund, Flotation Panels, Admin/Baton/Flashlight Pouch, 2-Mag Pistol pouch NO ARMOR The Praetorian® Rapid Cutaway Ballistic Vest is the finest quick release ballistic armor system in the world. The Praetorian incorporates the revolutionary Single Wire Release System first introduced by Diamondback Tactical™. The single wire allows the vest to separate in seconds and with the simple one wire design, reassembly takes just a few minutes. It features a super-strong hook and loop front closure that makes securing the vest simple and easy with no zipper to jam or break. The exclusive low profile front pocket is perfect for holding your pistol, extra mags and other essential pieces of equipment. The cummerbund adjustment system is extremely user-friendly and allows the vest to be perfectly adjusted without disassembly while the user is wearing it. Reinforced hard polyurethane stress members along its length prevent it from twisting or sagging under gear load. The heavy duty, super reinforced drag handle allows rescue personnel to safely remove you from harm’s way without fear of breakage - even if you are bogged down with extra water weight. If you are looking for safety, security, operational load carry capability, ease of use and superior protection in a flexible system, the Praetorian Rapid Cutaway Ballistic Vest is what you need. See the videos of this vest and how it works - http://www.youtube.c...ackTactical#p/u

SOLD

Thanks Maksim. Priced to move

LOL! The vest would only cover your chest. Stomach area would be exposed somewhat.

Not really, no. It's not a "D cup only" cavity built into the front panel. The sizing has more to do with how tightly you can cinch down the side velcro straps. The vest would be perfect for either a larger cup woman, or a wider torso woman.

I had a friend try on the vest who is a 34B. With the velcro straps on the "tightest setting", this vest had plenty of room in the chest/ribs area. With a sweater underneath it would fit fine. If the woman's torso is wider (36B, for example), I believe it would be a great fit. EDIT: The front and rear carriers are of different sizes. If you can find a smaller rear carrier, then this can fit a much smaller woman. You'll already have the armor panel.

Good call. Thanks.

34D Female Woman's Body Armor Concealable "BulletProof" Vest Level II $150, shipping included. *** Full refund within 7 days if vest does not fit properly, or any other issues. Excellent condition. Issued to someone who had a desk job, lightly worn with very few signs of use or wear. No markings on inside or the outside of the carriers (name, employee#, blood type, company logo). Has a MINOR cosmetic stain on carrier. Nothing a small brush and warm soapy water can't fix. (can't even tell from pics) No fading or tears Elastic straps and Velcro are 100% serviceable. Ballistic panels are 100% serviceable. This vest looks almost new. You will be satisfied. Details: Manufacturer: ABA - American Body Armor Size: 34D Front panel: 34DR Rear panel: 40SX Condition: Carriers: Excellent, no markings Straps/Velcro: Excellent, 100% Ballistic panels: Excellent 100% serviceable labels: Very Good Date of manufacture: AUG 2002. Model: XT2TF-3 Armor Level: II Trauma Plates: A non-removable, thin, metal, 8”x6” trauma plate is built-in on the front ballistic panel of this vest (rear panel has no plate). The panel carriers are not designed to carry any additional Trauma Plates. Color: Navy blue Ballistic Panels, Black Velcro tabs and straps, Navy Blue covers (carriers) *this vest complies with NIJ Standard-0101.03

Many of you say "well, you gave up," or "it's your right and you have to fight for it." It's called taking the intelligent route. My life is too busy to spend in court. Not to mention, pissing-off my local police department is not the best idea. When the issue is ratified by professionals who have the time and resources to fight big brother, I may consider re-applying. Meanwhile, I remain under the radar, without a denied application on my record, living my life as I see fit. By the way... the simple fact that I can't walk into a gun shop and purchase whatever I want means "they won."

Not interested. I have a job, a family, a life. Sitting in court is not included in those plans. When the issue is worked-out by NJ2AS, then maybe I'll re-consider.

Easy transaction. Quick replies to PMs. Went out of his way to deliver my items. Awesome.

Well, I've submitted a copy of the form to NJ2AS for them to take action. I'm also cancelling my P2P application. Don't want to risk being denied my application due to: A) My refusal to complete the illegal form. B) Backlash from NJ2AS actions. I can see a local PD taking this kind of action very "personally." Oh well, no more handguns until I move to a free state.