Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

MartyZ

Premier Member
  • Joined

  • Last visited

Everything posted by MartyZ

  1. That's correct. First the socket broke so i grabbed an impact socket. Then, with the impact socket, the head of the breaker bar just sheared right off
  2. So, the SPR i built last year weighs about 11.4 lbs. I am very happy with the BA barrel and now they started making fluted barrels, and of course I would need a new muzzle brake and gas block. So what say the community, is shaving off 1.5 lbs worth tbe $500 for the new barrel+gas block+muzzle brake?
  3. Well, i finally replaced the bolts this morning, what a pain in the a$$. Seven went in fine, but one front right, resulted in a broken socket and broken breaker bar. Yep thats right, those bolts, trying to tighten them to spec resulted in loosing a socket and braker bar just 3 degrees short of spec. I still think these bolts are not tty (stretch) bolts, but the specs are torgue PLUS angle, with a ton of chemical thread locker on them. I compared the original bolts to the brand new ones, no sign of stretch. Lengths are the same and threads line up perfectly.
  4. I prefer GM, and am anti-ford. But the biggest mistake I ever made, and still regret to this day, is getting rid of my 2001 durango, the original design that was based on the dakota. That 4.7 was a beast, had 150k miles on it when i traded it in (stupid, stupid, stupid) and was still running strong. The only problems I ever had with it were caused by user error, but once fixed, she kept on going.
  5. I will definately look into the measurements.
  6. I opted for the JP because I want a 2 piece gb. This would allow me to make mods in the future without worying about the pinned mb. The only choices for an adjustable 2 piece gb are JP and Witt Machines. The JP is more expensive but with their rep I am assuming it's better quality.
  7. After doing much research I have decided to go with the JP gas block due to the single fact that it is adjustable. From what I have read, the AR-10 platform, or at least DPMS version of it, is over gassed and in many cases requires an adjustable gas block.
  8. Get a scorpion, perfect against black widows . Check out this youtube vid. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjk4cWJjO7WAhVE6SYKHQryArMQtwIIKDAA&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D7mysTvCADko&usg=AOvVaw2NPzlp6hyLB1aRLz9jcNxd
  9. As I said, I need to get to my local shop and get it up on a lift to be able to use a longer bar. I also ordered another set of new bolts (another $50) down the drain to replace these new bolts when I get it up on a lift. On a side note, i'm not trying to argue, i'm just trying to understand. The GM service manual states nothing about these being TTY bolts, TTY only comes up on online boards and I am honestly thinking that people are misinterpreting the GM specs. The GM manual states to replace the bolts and torque them to 44 front, 30 rear, and add 90 degrees, nowhere does the manual state TTY. I am thinking GM wants them replaced due to the chemical thread locker and specifying a torque plus angle spec, not a TTY spec. The reason I am thinking this is because these bolts don't look like stretch bolts, they don't have a reduced diameter shank like head bolts do. These bolts honestly look like standard coated 10.9 bolts, see pics below (can't embed them thru google photos). When the new bolts come in I will also measure and compare them, didn't think of doing that with the first set of new bolts. Front https://photos.app.goo.gl/ZklyYYZwFZf33YPr2 https://photos.app.goo.gl/vbKt1tooJJ2J6jnn1 Rear https://photos.app.goo.gl/3ZwW80zHeoGwak3V2 https://photos.app.goo.gl/pf9kSVj466g9BduX2
  10. I changed my brakes today, couldn't get the bolts to 90 degrees, only got them to 60 degrees and wouldn't go any further. Using an 18 inch breaker bar and the bolts just wouldn't go any further. I did however have the car up on ramps and couldn't use a longer bar for better leverage. I did drive around for about 20 miles after bedding the brakes and everything looks good. I will need to get it to my local shop, get it up on a lift, and use a longer bar to take the bolts down another 30 degrees. But honestly, this is the dumbest design i have ever seen. TTY for head bolts and other engine parts I understand, but caliper brackets makes absolutely no sense.
  11. As per GM manual, fronts are tongued at 44 and rears at 30. Both require 90 degrees. These are the bolts that attach the caliper bracket to the upright, not the slide pin bolts. The funny thing is that these new bolts have no indication on them that they are TTY, Factory GM bolts. Only stamp on them is "10.9"
  12. I'm not saying reusing old bolts that have already been torqued to yield. I am saying, brand new bolts, do they have to be torqued to yield? Is the reason for torquing to yield to prevent loosening or for added strength?
  13. I have another question. What are your thoughts of just torquing these bolts (new bolts) and not putting the angle on them. They have thread locker pre-applied so they shouldn't loosen. But will that somehow weaken it? Just thinking of future re-use.
  14. I'm thinking the same thing. Also the fact that they are charging twice as much as some mid-west dealers only supports that fact.
  15. Yeah, everything I've read says TTY and GM recommends chamging them. That's why I was surprised and confused when I heard dealers don't stock them. That is why I am asking hear, trying to dig a little further. Finding and buying them is not the issue. The issue is, due I really need to replace them. Logically I do, but reading many people using loctite and dealers not stocking them makes me think that GM is just trying to make a profit by requiring an additional $160 worth of bolts for what should be a $300 brake job.
  16. Yeah, I check. Got part numbers from 4 of the dealers and all match, but not a single NJ dealer has them in stock and they average $10 each, and I need 8. They are more expensive on ebay. Found them in stock at some mid-west dealers for about $6 each. But that still doesn't explain why they wouldn't have them in stock if they are a required replacement parts for brake jobs. Even the guide rod bolts are required replacement parts and the dealers don't have them in stock either, at $12 each. But those I found aftermarket for $5 for the wheel set, guide rods and bolts.
  17. Just to start let me say that I worked my way thru high school and college as a mechanic and have been working on my own cars ever since, so this information is very perplexing for me and I need help. So, i'm getting ready to change out the brake pads and rotors on my car, 2015 Camaro ls, ordered the pads, rotors, and fixed my leaking jack. While doing some more research I come across many online posts that state that the caliper bracket bolts, which secure the caliper bracket to the upright need to be replaced because they are TTY and are one time use only, according to GM. Ok, i'm fine with that, in the hundreds of brake jobs that I have done I have never replaced those bolts, but ok, not a problem. So I call one Chevy dealer, not in stock, another dealer, not in stock, 10 Chevy dealers and not a single one of them have these bolts in stock. It's not a problem ordering them but it makes me wonder, if GM recommends changing out these bolts, and they are a replacement part for any standard brake job, weather the rotor is being replaced or turned, then why don't any dealers have them in stock? Seams kind of counter intuitive. So let me ask the professionals here who are much wiser then me in these matters. Do these bolts really need to be swapped out? And are dealers swapping them out when performing brake jobs, if they don't have them in stock?
  18. Shooting at R14, they tell you to leave brass if you don't want it. Shooting at an indoor range, grab a broom when your done, and a minute later it's clean. No need to pick up. Like I said earlier, my OCD makes me want to pick up my own brass only, I don't want anyone elses brass, period. Even when I mark my brass and wait till the end to pick it up, I still emd up looking for my marked brass and not picking up anyone elses, it is a major pain in the a$$, at least for me, and I don't want to do it anymore.
  19. That's a great idea, I will definitely look into that.
  20. That is your opinion and you are entitled to it. For me, having to pick up brass diminishes the enjoyment of shooting, plain and simple. Everyone has their own reasons, this is mine.
  21. I was looking at PA sales, great prices on most things I need for my AR .308 build. I wasn't ready to pull the trigger yet however, funds are low right now. They also had the GS2 triggers for $132 I think. Anyone know how PA sales are for black friday? I have a feeling I will be on a shopping spree at that point? I did pick up a Luth-AR stock 2 weeks ago from PA for $104, and an Aero .308 LPK for $69.99. I love PA when they have a sale.
  22. I still have a lot of .223, .45, 9mm, .308, .44, and .357 brass. I will continue to reload until that is all gone. Maybe, as someone said, I just need a brake from picking up brass, we will see. All I know is that I am not picking up any more brass for the foreseeable future. Maybe I will eventually find a brass catcher that actually works without having me contort myself to shoot almost touching it.
  23. I have the magpul m-lok sling mount, it mounts very solid, no issues. I however user the standard 1.25 sling swivel, I personally have not found a reason for the more expensive sling swivels, but my life does not depend on them on a regular basis so i'm not quite sure how they will hold up in the long run.
  24. Well, just called the NJSP technology group, spoke to a really nice guy. But he told me that it's a very grey area, he basically said "I might think it's ok but the next guy might not". He said I can do what I want but he would not do it himself, too much risk. Well looks like it's a no go, unless the NJSP puts out an opinion letter, which I doubt will ever happen. It was worth a try, thanks a lot everyone.
  25. Nope, it's not, that's why i am trying to find out first. I might give NJSP a call later.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.