Everything posted by MartyZ
-
Someone school me on Leverguns
I passed up such a great deal at Oaks, there was a mid 1960s (I think, might have been 1970s, but it was still pre-remington) Marlin 30-30 for around $425 in very good condition and I didn't get it. I am such an idiot...
-
Multiple calibers OR stick with one or two?
I have .40, .45 ACP, 357/38S, .22LR, .223, .308 and 12G. I had a 30-30 but I sold it, may get another in the future. However I am definately adding a 9mm and .44 in the near future. As others have stated more variety = more fun and more chances of finding ammo during a shortage.
-
Powder for .45, 230gr JHP
Should I expect feeding issues with a 1.200" OAL? These will be shot from a HK USP45 and SIG 1911. Or should I increase the OAL and load closer to the max to balance out the pressure?
-
Powder for .45, 230gr JHP
Both Lee and IMR reloading data for 800x state for 230gn FMJ, min 6.3gn, max 7.0gn and an OAL length of 1.200". I loaded my first batch of 15 rounds with 6.3gn and an OAL of 1.200" but they appear to be a lot shorter then factory ammo, I need to measure the OAL of the factory ammo. But does 1.200" OAL sound right? Anyway, I plan on loading another 15 rounds with 6.5gn and 15 with 6.7gn and try them out at the range, see which one works best. I was also thinking of loading a few at 6.9gn but should I even try to load to the max?
-
Powder for .45, 230gr JHP
Ok guys, went to oaks and the only powder i could find was IMR 800X. Now, the lee manual says for 230gn to use min 6.3gn and max 7gn. Has anyone used 800X for 45? Should i start with 6.3 or a little more?
-
Vortex Strikefire II $150
I had a strikefire, they also changed the location of the power button. It used to be on the side which always ran into the problem of turning it on if you bumped it against something while putting the gun away. This version has a better button placement IMO
-
Storing powder and primers
Have been reading a lot of literature about reloading as well as watching numerous youtube videos. I finally got my reloading press and will be getting components hopefully this weekend. I read that powder should be stored in a cool dry place in a container (cabinet) that is insulated from heat and that will allow for venting of gasses in the event that the powder ignites. My only choice is to store the powder and primers in the garage where I do other things such as wood working and on rare occasions metal cutting (sparks), no welding though. How would you suggest I store my powder and primers? Metal cabinet, wood cabinet? Line cabinet with fire proof material?
-
Where to find powder for 45ACP?
Also, davis sports in NY is a Hodgdons authorized dealer, he is on 17 just over the border. When I called them they said they don't always have HP38 in stock but they do get regular shipments. It's hit and miss but it's atleast something.
-
Where to find powder for 45ACP?
I'm hoping to find some at oaks this weekend
-
Remington 870 Bullpup Conversion
Just saw the conversion video on their website, way too many little screws, forget about field stripping
-
AK gunsmith needed in central NJ
well I finally got a chance to go to the range yesterday, out of 60 rounds not a single slam fire, so i'm happy. I did find a red footprint of my stock on my shoulder this morning , those .308s really kick. On a different note, as far as accuracy goes, at 25 yards in a badly lit indoor range with iron sights I got 19 rounds into a 8 inch circle, which isn't bad for me.
-
Decent holster for M9A1
I have the DeSantis Thumb Break Scabbard Belt Holster Right Hand Beretta 92-A1 Leather Black for my 96A1, fits perfectly and the retention is adjustable, it should fit the M9A1. Midway has it for $48.99.
-
Powder for .45, 230gr JHP
I think I just found another place if I can't find anything at Oaks, Davis sports in sloutsberg NY apparently is an authorized Hodgdon resaler, they don't have a lot in stock but they do get regular shipments. They are only 15 min from my work.
-
Powder for .45, 230gr JHP
I would love to buy in bulk and split. But at this point I am just learning to reload and don't want to buy too much.
-
Powder for .45, 230gr JHP
Are they usually at Oaks?
-
SAF v NJ (MULLER et al v. MAENZA et al)
If they are saying that "nj doesn't ban the public carrying of handguns for self defense" then all we need to do is find one application that was denied that had "self defense" as a justifiable need. Their defense will be useless.
-
Powder for .45, 230gr JHP
Edit: FMJ not JHP Ok guys, this conversation started in a different thread but I figured the continuation should have it's own thread. I just ordered my first reloading press and will get it this week, will start with .45 acp. I am planning a trip to Oaks on 3/29 (can't go 3/28) to pick up powder and primers. Here is the question, pistol powder will probably be very scarce and selection will be non existent. I have done some research online and have found what others use for .45 ACP, 230gr FMJ bullets, I could not however find out which powder is better than others. I want to put together a list of powders from best to worst, basically what I should look for first, if it's not there, then just go down the list. If you guys can help me put this list together I would greatly appreciate it. Here are the powders that I found other use: Winchester 231 Winchester WSF Winchester WST Hodgdon HP38 Hodgdon CLAYS Hodgdon HS6 Hodgdon TiteGroup Alliant Blue Dot Alliant Green Dot Alliant Red Dot Alliant Herco Alliant Bullseye Alliant Unique Accurate N100 Accurate No. 2 Accurate No. 5 Accurate S1000 VihtaVuori N310 VihtaVuori N320 VihtaVuori N340 VihtaVuori N350
-
Do I need crimp die for .45 ACP
unfortunately I can't go on Friday, work is always getting in the way
-
Do I need crimp die for .45 ACP
The link is not working for me for some reason
-
Do I need crimp die for .45 ACP
Well i ordeed everything except for the tumbler on midway last night from my original list but i added the fcd as well. Shopped around and midway came out the cheapest with promo code, total $189 with shipping. I can wait on the tumbler for now, i have a home made one. The $200 limit was strictly for equipment not components. I have over 1,000 .45 cases that i have been saving and plan on getting powder, primer and bullets at Oaks on 3/29. Still need to get a reloading manual. While on the subject, what powder would you guys recomend for .45 230gr fmj? I've read that winchester 231 is a good powder.
-
Do I need crimp die for .45 ACP
looking at prices, I think i'll go for the Lee Challenger Breech Lock Single Stage Press Anniversary Kit for now and get a turret press in the future. The wife only approved $200
-
Do I need crimp die for .45 ACP
How about the lee promaster 1000 progressive?
-
Do I need crimp die for .45 ACP
Looking online now, trying to find it. Isn't it just SOP that when midway have a promo code, what I want is out of stock. Ok, so if I don't get the kit, what do I need? Turret press 4 Die set Digital scale Digital caliper (I have) powder dispenser? Priming kit?
-
Do I need crimp die for .45 ACP
ok, thanks guys. Next question, this is what my shopping cart looks like, I don't want to spend a lot but I want it to last atleast a few years, what do you think: Lee Challenger Breech Lock Single Stage Press Anniversary Kit Lee Carbide 3-Die Set 45 ACP Lee Breech Lock Quick Change Bushings with Die Lock Ring Eliminator Frankford Arsenal Quick-N-EZ Case Tumbler besides a reloading manual, what else am I missing?
-
Do I need crimp die for .45 ACP
The question says it all. I am about to purchase my first press and dies, will be starting with .45 ACP. Do I need a crimp die for .45 ACP? Thanks.