M1152

In that njm.com article Bonnie is shown with the stepfather of Tre'Devon Lane who was killed. Apparently this kid was a great kid with a promising future but he was in the wrong place at the wrong time. A quick search seems to indicate the killers are still out there as of October 2014 according to this njm article I want them to see my tears' - Trenton's unsolved homicides leave families to grieve in frustration. So if that’s case wouldn’t Watson's time be better spent looking for the killers (since Trenton is Watson’s hometown) instead of trying make a connection between this kid’s death and online sales which likely has nothing to do with the case?

It should be a good one and needless to say probably the biggest payday for both. Mayweather may have the edge just being bigger & stronger, that said I’d like to see Pacquiao pull it off.

Just to be clear these were two separate elections. It was CC’s decision to hold a "Special election" for the Senate seat now held by Booker rather than have had the two elections together which CC could have approved. Some in the press speculate the reason was because CC thought if elections were held together it could have been a threat to his own re-election.....

Some good comments and thoughts but this comment sums it up for me. I got my MC DL in or around 1976 and eventually made the bike my full time vehicle. After a couple of years commuting year-round I finally threw in the towel and gave it up all together (so I thought) because of some of the above negative reasons cited above about the NJ & Tristate A-hole drivers, but mostly I just got worn-out by it. In 2005 I got the itch again and went out and purchased a new Harley for pleasure only, it was one of the best decisions I made for myself. Like guns and everything else for that matter bikes aren't for everyone.

Sweeny had been playing this Former Iron Worker thing for his entire career. How long did he actually work the steel, does anyone know? I know he was the Business Agent but I just can’t visualize Sweeny and a spud wrench connecting I-beams in midair. If you have Netflix dial up "Men at Lunch" they did a film about it. Here's the Netflix description. Inspired by the iconic 1932 photo of 11 unnamed workers eating lunch atop a steel girder, filmmaker Seán Ó Cualáin sets out to learn their identities

Normally *82 is used prior to the call with most service providers as a “one-time unblock” of your line that is configured to always block your CID info from being displayed at the locations you are calling. Here’s a couple of other options for you and the other members. I’ve heard good things about Nomorobo but never used it myself. Another one is PhoneTray but the only downside is you need a dedicated computer and you pay a nominal fee for the software and yearly renewal.

Nice...

OT but I can’t help and think if Obama did have a 3RD term the only person that would be happier than Obama would be Putin

Here you go, borrowed from twitter

Nice, it looks good on there too. Thanks for posting. EDIT BTW I see you went for the turned-down bolt, how do you like that?

Haven’t purchased any handgun ammo in a while, last year was pretty much all rifle. So yes only just looking for cheap ammo for now and will check the search engines as per your suggestion. If I go for a case I'll take Krdshrd's suggestion and get it in 124gr but I do want to try a box or two of the 115gr stuff because the Storm is *suppose* to have a light recoil due to the rotating bolt. I'd like to test it with a variety of different ammo just to see if there's one it don't like. Here it is right out of the box next to my s&w5906

First off, Thanks for ALL the replies and suggestions. I read in one of the Midway reviews Magtech and S&B are the same company, I didn’t know that. I’ve used Magtech before in 38 and didn’t have any issues. I currently have the old S&W5906 that I believe I purchased not long after they were first introduced. The only 9mm plinking ammo I have is some Chinese stuff I purchased around the same time when I got the S&W. I borrowed this image off one of the gun auctions site but this is same stuff I have. I’ll use it up but I’ll be looking for something new going forward so just wanted what you guys were using for plinking. I have a Beretta coming in and supposedly it will eat anything so we will see. IIRC while researching the Beretta some of the other well-known 9’s didn’t like Wolf ammo so I’d probably only buy something with no known issues. Again thank you ALL for the info & feedback

I have a new 9mm coming in shortly and I'm looking for some decent paper-punching ammo. Anyone have a preference on either of the two listed below or is it a coin toss? Thanks in advance Sellier & Bellot Ammunition 9mm Luger 115 Grain Full Metal Jacket or CCI Blazer Brass Ammunition 9mm Luger 115 Grain Full Metal Jacket

She’s a complete libtard and her two sons were stick-up artists. So now the solution is disarm honest citizens, this makes perfect sense. Way to go NJ voters, thanks for voting in another clueless idiot.

thanks for the update

I've used AAA twice so far, good service/no complaints

That is a good deal. I have the old kit, probably the same as you with that big azz carb adapter. That new carb adapter is a big improvement over the old with regards to pushing the air filter further out. IIRC some folks had to cut their frame to install the old carb adapter which would have prevented me from doing the conversion but I lucked and had plenty of room for the old adapter

not NJ compliant but the PLR-16 is another .233/5.56 pistol

There’s no way to justify doing a non-code planned install and I highly doubt the OP is looking for that type of advice

It’s not an Outlet, it is an Inlet box and you need that regardless if it being an Interlock or Transfer switch. Anyone who hardwires directly into the panel without a UL listed device to prevent back feed is a fool. There is another option which is the GenerLink here’s another Youtube on it, I don’t know anyone that has one but seen them pop up in other forums

It depends on the Transfer Switch, you could get them in 6, 8 or 10 circuits. I’ve seen the 10 circuit for $350. With a 7500 watt should have no problem getting a 10 circuit. The other option is Interlock device which would be cheaper but you don’t get the gauges unless you add them separate. What that is you add another Main breaker in your panel next to existing Main. The new breaker back feeds your panel and the interlock device is a mechanical system that locks the Mains so only one could be on at a time. The Interlock system makes it impossible to have the Gen Main and Utility main on at the same time. Here’s a YouTube vid I posted and others have before on the Interlock. I installed an 8- circuit Transfer Switch for my 5500 watt gen so I don’t know how much an Electrician would charge. Anyhow I opted for the Transfer Switch over the Interlock because I wanted the gauges and IMO it was much easier to load balance.

Was listening to the 60’s station on Sirus and Phlash Phelps (the host) mentioned it. He also played a few tunes Nimoy sang. I think Nimoy was an all-around good guy, RIP

yep, been cold. not as good as yours but here my 1 degree pic from 2/20/15. 5 more weeks and its all over, I'm just glad the old car is still starting...

Thanks, good to know...

Sportsman's Center back in the 80's was always a good store. I always preferred Sportsman's Center over Harry's. The gun guy back then was named Steve IIRC, he was very knowledgeable and just a good guy but sadly he past away. Its been a while since I've been in there, Fritz was the new gun guy last time I was in there, he's another good guy, just a perfect gentlemen and also very knowledgeable. After Harry's changed to Cheyenne I gave them another try. I purchased used revolver from them right after the Harry's transition and did OK, then a few months later traded a long gun for another rifle and didn't do so well. I think they are little pricy on some stuff and going forward would buy guns elsewhere... Wow, Edelman's on RT130 correct? That's going back a while for me. I purchased my first Mini14 there back in the mid 80's. Also remember the range a little further North off RT130 I believe it was called Crossroads just across from the high school. They use to sell too, that was a fun range. We use to shoot in there pretty often..