FishNHard

The trees are in my neighbors yard say80ft -120 depending on what side of the house the dish would go on I only can get an idea of direction thru what others have there dishes at and theres a site you punch in your address and it will tell which way the dish needs to face

My internet is thru Verizon and have not had any big issues so im mostly just looking for tv , The problems im having is a lot of freezing and tiling .Ive called them about it around 8 times already and the last time I called I found out I have been getting charged $ 2.99 for a digital adaptor which I don't have since jan 24th 2011 . They sent a tech out and he checked the box and cables in my house all was fine when he went to the pole found out the was a signal issue said repair guys will be by to fix it that was 2 months ago when I called last time i also found out no repair order was ever issued . Right now I pay $105 for basic cable with the outdoor channel added . direct tv with be $47.13 for the first 12 months then it goes up $43.00 after that , they only thing I hate the 2 year lock in and right now with the tree's being bare if they get a good signal now and just put it up what happens when the trees fill in and if reception goes to crap am I screwed cause no I have a 2yr contract .

Hey all, Id like to get rid of Comcast and try out direct tv and was wondering if anyone here has it and how do you like it ? any issues good or bad , thanks John

That's a beauty , I tried to get in on the 1st trapping course this year to take but filled up in no time

Another way to do it is a power outlet mounted outside the house which is wired to your panel on a 30 amp breaker . which when you lose power you(((( MUST)))) TURN OFF YOUR MAIN BREAKER and all of your breakers turn on your generator turn on the 30amp breaker in your panel the generator is now back feeding your panel now you can turn on some breakers to give you some common lighting furnace refrigerator . , this type of set up allows you to manage your load should you need to run a/c you need to turn off other stuff . the only draw back is is that you must remember to never to have the main breaker and 30 amp gen breaker on at the same time . we install a lot of this type when people cant afford a whole house generator and is the cheapest way also.

Thanks guys for your help . I will get on that tomorrow about opening a roth ira

Ok long story short, Ive been with this electrical company for 8 years I make a decent hourly rate but that's it . No 401k no profit sharing nothing , At 46 I either need to find a job that offers something which there are not that many anymore or need to find out what I can do . im not expecting to be filthy rich at 60 but I need to have something other then social security , I know nothing about finances like that and im sure theres a lot of folks on here that are in the same boat, So I was wondering if anyone on here that has a good understanding of those things maybe can shed some light on where a person in this position should begin .Thanks John

There also is a for sale section on taxidermy.net you may be able to find a faster buyer thru there.

the only way around it in NJ is you would have to lease the deer mount to someone say 99 years then in 99 years they can come bring it back , its has and is done here . as far as what the mounts are worth the deer would depend on rack size and the shape of mount . same goes for the ram if the ram has a pretty unusual color pattern it may bring a little more . but an estimate without seeing pics would be $300-375 on deer 400+ on ram , you maybe check into selling them to a sporting goods or a country restaurant that may have some mounts a lot of places will buy mounts for decor purposes .

It is illegal to sell deer mounts in NJ im not sure about the ram but deer antlers is a big no no. John

Also if you don't own one and hunt from a tree BUY !!!!!!!!!!!!!!!!!!!!!!!!!!!!! A SAFTEY HARNESS, I see time and time again people spend $1000 plus on a bow spend the dam $60 and buy somthing thatll save your life . not to sound dickish but it only take an extra minute to lock yourself to the tree .

If you really going to get into bowhunting go to a bow shop and get fitted for the right size bow for you, to many people buy from dicks and the bow is to small are to big for there draw length . buy a quality release . Range finder should also be considered . John

colt anaconda Svt40 RPD

Well since the weekend was a little crappy for hunting I figured since I just got into reloading I would make a bench so now on days I cant hunt ill just make up some ammo.

Made this from some aluminum 1inch threaded pipe and a few 90 and 45 degree pipe fittings.

most reputable bow shops will let you shoot different crossbows go to a place shoot a few different models and see what shoots the best for you . just like a compound you need to fit one to you my bowtech is a small compact xbow my wife shoots a parker which is a lot longer .

I shoot a bowtech stryker and a compound both have its places if your son is just starting out a barnet wildcat c5 is a nice package for around $320 if he finds crossbows aren't his preference then he's not out a lot of money . most crossbows are way to powerful for wood shafts and I HIGHLY not recommend it the package will come with carbon fiber bolts . John

Had a Psl transferred and some compliance work done Top notch work and great prices. I enjoyed hanging out and BS'ING and also picked up a silver boy for the wife which she loved , Thanks again Steve. John

My brother recently got the vizio 80 inch I think it was just under $3000 very nice tv but only draw back is you really need to sit and fine tune the color adjustments to your liking , and just a little bit of shadowing in the corners but well worth it , Sharp put out a 90 inch saw one at BJ'S thing is massive and so was the price at $7000

SGAMMO -AIMS SURPLUS AND DANS SPORTING GOODS ALL GOOD TO GO

tuktuk, it pretty much would be just a gun for the range that's about it , and just have something different along with the mosins ,

The New one says it was built at the cugir plant so I take it that's the one to look for?

Whats up all. On GB I see 2 rifles one is a built kit on a us recvr and the other is a NIB , I was wondering what your guys opinions are on a built rifle or is it just better just paying the xtra for the factory rifle since is really only a couple hundred dollar difference between them . I know the days of the $700 are long past and the price on these is $1400 on the built and $1600 on the new one , are these prices in the ballpark with all the ban crap that we all are dealing with anymore , just looking for some insight from some who has a little more knowledge about these rifles . Thanks for your guys opinions. John

I'm looking on gun broker for a PSL rifle and seems most have a bayonet lug and may need to have the break pinned or welded , I would like to know ahead of time who does transfers and compliance work, Thanks John

Thanks for me spraying coffee all over my monitor . LOL