DargZ

http://www.slickguns.com/product/57x28-federal-american-eagle-pistol-ammo-50-2299 Great deal - 46/round. This is the cheapest I've seen this. I normally see this stuff for over 1 buck per round.

Sorry, missed your post about pictures. Here you go. In the first picture, you can see that it adds a little over 3.25 inches when measuring from where the threads start. The crush washer gives it that little bit extra. The second picture is from above but I did not line up the ruler.

Nice, I went 2 Sundays ago and they did not have any primers, the powder I wanted, pistol reloading dies, reloading presses or 22lr ammo. I was talking to one of the sales guys and he said they get stuff in but things are gone by Saturday morning. I suspect they restock on Mondays. I think I need to make a trip on a weekday. Prices seem to be better on Cabela's website though. Same box of PMC 223 ammo was selling online for 8.99 compared to 12.99 in the store. No hazmat on the primers and powder is a plus. Natchez was selling primers at a similar price range but that was before hazmat and shipping.

I ordered a M44 in the past from them. There was no option of handpicking. It arrived in MUCH better shape than expected. It practically looked unfired. I'm wondering how much better is the handpicked.

Nice Joe. I want to see the training mortar sent down range. I guess this was after I bumped into you at OMG.

http://www.joeboboutfitters.com/Rock_River_Arms_20_Standard_A4_Upper_Half_Flat_To_p/rra-ar0450b.htm

http://www.joeboboutfitters.com/Spike_s_Tactical_Lower_Multi_Forged_Bullet_p/sp-stls012.htm

http://www.gandrtactical.com/cgi-bin/commerce.cgi?preadd=action&key=BCG-BCM

The WWB stuff are boxed with no protection. I had quite a few rounds where the bullet was seated too deep as the box was dropped on its side most likely from the factory as there was no damage on the cabelas shipping box or the box that Winchester packaged the value packs in. The only damage I see is on the value pack box. I had 12 rounds between 2 boxes that had this issue. The remaining 3 boxes were good. Cabelas credited me for the rounds though but it worries me. If it was only slightly out of spec that I did not visually notice it, I would've ran it thru my gun and who knows what the outcome would have been. It's a good price regardless of whether cabelas credited me or not though and the rounds I put thru ran well though.

Forgot to note that you need to factor in items to make it compliant. You would need the FFL to pin the stock, remove flash hider, pin your choice of muzzle brake, and hopefully get you a NJ compliant 15 round mag. This one does not have a bayonet lug but if you get one that has it, you would need it ground down.

Yes, it's crossed my mind to get a S2000. I wish they still made them new. I would suggest you keep an eye out. If you miss out on this one, don't worry. There are tons of cheap ARs out there now.

I wish they did this also. I would probably continue using the PPQ in USPSA production.

Credit goes to Twong11219. I would've just dimpled the barrel. I buy things and bounce crazy projects off of him.

Nope, you can have them fax it in as soon as your long gun arrives.

Go check out slickguns.com and see what's on sale in the rifle section. Grabagun has the Colt's LE6900 on sale for 875.93. Shipping is 5.99 to your choice of FFL. They have a whole slew of FFLs they have on file. Just find your FFL of choice and select them. This Colt is like the S&W M&P Sport. It saves money by not including a dust cover or forward assist. Review of it can be found on Youtube. . Go thru the whole video before you decide. You don't have to pull the trigger on this one as there are quite a few on sale at the moment but this is just an example of a rifle below 1k. Any upper with a rail will be optics ready. You just have to select your choice of optic.

Well, if it's not faxed yet, they should be able to check off the box for long gun also. If they have faxed in your NICS check already, you can have them fax in another NICS for a long gun. You do not need to wait 30 days to pick up the long gun. This only applies to handguns. I would temper the expectations of picking up in 5-10 business days. It's been more like 17 calendar days minimum.

3 boxes left?

Go get some. 40 cents/round http://www.aimsurplus.com/product.aspx?item=AP223FMJ55

Twong11219 and I installed this one for my brother in law. He did most of the hard work. We actually made marks in the barrel so that the set screws are almost flush with the sight. https://www.whiteoakarmament.com/xcart/product.php?productid=17641&cat=287&page=1

+1 for the paddle. I wonder how the magazines will work. The M1 magazine is not compatible with the M2 magazine.

If you must have a BCM BCG and do not want pay the Bravo Company NRA donation, Rainier has them in stock. http://www.rainierarms.com/?page=shop/detail&product_id=3653#arpartsfinder.com

Herter's 308 - $9.99/box (50 cents/round before shipping) http://www.cabelas.com/product/HERTERS-308WIN-150GR-FMJ20/1431857.uts?avad=48247_d449a83f&WT.mc_id=al35987&rid=12&WT.tsrc=AFF Herter's 223 - $5.99/box (30 cents/round before shipping) http://www.cabelas.com/product/Shooting/Ammunition/Rimfire-Ammunition%7C/pc/104792580/c/104691780/sc/104536080/HERTERS-223-REM-AMMO20/1440308.uts?avad=48247_e449dc93&WT.mc_id=al35987&rid=12&WT.tsrc=AFF Herter's 7.62x39 - $6.49/box (32 cents/round before shipping - Not a great deal as it was 5.99 not too long ago. If you are ordering already, it may be worth it. You may be paying .50 more per box (2.50 if you order the 5 box max), but the shipping fees if you just ordered this would be more than 2.50) http://www.cabelas.com/catalog/search_catalog_command.cmd?fromProductSearch=true&item1=AD%20-%20217237&avad=48247_c449ac37&WT.mc_id=al35987&rid=12&WT.tsrc=AFF

I've got one and love it. I originally was using a target master kit in my AR upper. The rounds were going all over the place at 25 yards. I was annoyed that I could not get any groupings. I was going to put up my target master for sale but my buddy told me about the Taccom stuff. I figure I would bit the bullet and buy the barrel as I have a stripped upper. I purchased it from Joe Bob's as they had the barrel in stock along with the reliability kit. Tim, the owner at Taccom is great. He walked me through some of the issues I had with installing the reliability kit into the Target Master. Once assembled, I went to test it out. I had some feeding issues and sent some pictures to Tim. He said to send him the upper and he would fix it. Once I got it back, the Taccom upper works great. It groups very well at 25 yds. No feeding issues. The barrel is very thin on the ULW barrel but Taccom stands by their stuff. If you have any issues, reach out to them. You can also opt for the M4 contour barrel that looks thicker. I think any barrel may go kaboom if there is another round already lodged in the barrel though.

Almost at normal pricing. Limit at 5 boxes though. http://www.cabelas.com/catalog/product.jsp?productId=1440229&categoryId=0&parentCategoryId=0&subCategoryId=0&indexId=0&productVariantId=1365845&quantity=5&itemGUID=&WTz_l=CQO&destination=/user/wishlist.jsp Store pricing was $12.99/box. Cost per round with shipping is 54 cents/round. Shipping is 8.95 for non-Club Visa members.

Subscribe to their notifications. Great upper and great price. Kudos.