Everything posted by Lalo
-
Blackhawk! Ultra Light Tactical Pants $9.99 Shipped
- New Palmetto State Armory AK - Question about NJ Compliance
Going by that pic, if "AK47" is in the model name, I would say it's a no-go. You could argue the point that it actually says "PSA-K47" but do you really want to roll that dice?- Blackhawk! Ultra Light Tactical Pants $9.99 Shipped
Thanks. These are actually very comfortable pants and perfect for training classes.- PSA 223 ammo deal
Missed it again!- RTSP Feedback & Suggestions
Thanks Pete, that's what I thought as well. Maybe a month ago I passed by the range with my brother and his father in law who was in from out of town so he can try out the AR and AK variant. It was a busy Saturday and with the video and paperwork he had to fill out + the lines it was about 45 minutes before we actually got up to the counter to get him setup with a pic, etc. Got everything done and the last thing the guy behind the counter said he had to do was check my ammo, no problem. I showed him the Wolf 223 and 7.62 steel cased ammo boxes and immediately said this could be a problem. He brought out the magnet, saw that it was sticking a little and told me I couldn't shoot that there. I tried explaining the composition of the round, bi-metal jacket, lead core not steel core, and that the magnet is also going to pick up the steel case and he still said we couldn't shoot it because it stuck to a magnet. We went back and forth a little and got nowhere. I turned to the rear counter and pointed out that you guys actually sell this ammo I am trying to shoot and he said something like we sell it but you still can't shoot it here. I turned around and saw the huge line behind me, looked around for you and you were talking to a customer and had a few other customers around you. By that time I was so fed up that we just picked up and left. Took the drive to PA and shot there instead. This is by all means not a complaint, just wanted to bring this to your attention so that the confusion can be rectified. Funny thing is I've shot Wolf steel cased ammo there plenty of times before without issue.- ak build in progress
Looks good so far. Please keep us in the loop with your progress.- Finally got my PAP M77 perfect
Looks great! have you shot it yet? I meant to take out the Saiga 7.62 this weekend to test accuracy with the Zhukov handguard but couldn't make it out. I'm really curious if the accuracy is affected at all with the Zhukov and Ultimak being clamped onto the barrel.- RTSP Feedback & Suggestions
What's the policy regarding using steel cased rifle caliber ammo (223/762) like Wolf or TulAmmo? From my understanding, these have a bimetal jacket/lead core.- PSA 223 ammo deal
TEMPORARILY OUT OF STOCK- Shotgun Shootout! @ Clinton WMA Saturday 5/30
Hey, thanks for coming everyone! We had a pretty good turnout (about 15 people I think) and it looked like everyone was safe and had a good time! See you guys and gals next month!- First AR on the way... best place for mags?
MidwestPX, they're one of our forum sponsors. Check his sub-forum, Ty may have the local resellers listed if you want to pick up locally. If not, just order through his site. http://midwestpx.com/index.php?cPath=15_136- Shotgun Shootout! @ Clinton WMA Saturday 5/30
Correct, not the first road with the sign, it's the second. Take a look at the map in the first post. So guys I'm looking to get there by 9 if not a few minutes earlier. If you guys get there before me and see a burgundy JK, flag me down will ya!- Magpul AK Handguard/Stock
You can always just use the stock upper hand guard with the Zhukov lower hand guard. Or, just get an Ultimak and scrap the upper all together.- Shotgun Shootout! @ Clinton WMA Saturday 5/30
Anyone know if there is anything in the rules that would prevent someone from bringing a quadcopter to the range for some aerial shots of the gang? (I don't have one, just throwing it out there in case someone that has one wants to come...)- Shotgun Shootout! @ Clinton WMA Saturday 5/30
Sounds like we have someone with a license and a thrower so we should be good. Sounds good! Can't wait to shoot one again. The last time someone brought one it was very finicky with ammo and had loading issues even when making sure not to short stoke it. I heard they've made tweaks to resolve most issues though. This will be a good time to run a few hundred rounds through it to break it in. I'm bringing a couple mossberg 500's and a Saiga12.- Magpul AK Handguard/Stock
Had a whole thing written out hen I lost it. What I wanted to say was... Just MAKE it fit! As long as you can get the metal sleeve properly secured to the barrel by either getting longer screws or by modifying the barrel clamps, if there is anything else preventing the polymer handguard from slipping on you can just trim the plastic. Here's a Zhukov handguard on a Vepr - http://imgur.com/a/men4r- Shotgun Shootout! @ Clinton WMA Saturday 5/30
For some reason I couldn't edit the poll to reflect a yes/no attendance and also show who submitted a vote so I removed it. Hopefully we'll have a good turnout. I'll be heading to EFGA afterwards too if anyone wants to check it out.- Shotgun Shootout! @ Clinton WMA Saturday 5/30
Thinking we might Change his to the 30th, what do you think?- Bravo Company
WC + BCM = Must have for leet operators regardless of cost- Shotgun Shootout! @ Clinton WMA Saturday 5/30
Updated the poll and post. We had 7 people vote the 24th. Hopefully we'll see everyone there!- Magpul AK Handguard/Stock
I think the main issue you'll have to deal with mounting the zhukov is the diameter of the barrel. Magpul says "Mounts to most AK-47/AKM/AK-74 rifles with barrel diameters between 17-18mm and greater than 13" in length". if your rifle meets that criteria, the other fitment issues you might encounter could probably be dealt with by trimming the polymer to fit the receiver, etc. I believe someone already mounted it on a Saiga 12 by getting longer screws for the clamps and trimming the plastic in some spots.- Magpul AK Handguard/Stock
The MOE handguard uses the stock handguard retaining clip as a mounting point. I believe they have 2x flavors of the MOE handguard. One with a knotch cut out so that you can keep the sling loop and one without the knotch cut out in case you want to cut the sling loop (but keep the rest of the retaining clip). To install the Zhukov handguard, you have to completely remove the handguard retaining clip. This is why the Zhukov is a good option for people who have Saigas since unless they did a full (correct) conversion which includes a retaining clip, they won't have a retaining clip to deal with at all.- Shotgun Shootout! @ Clinton WMA Saturday 5/30
So far it's looking like this Sunday is a go...- Any south jersey outdoor ranges allow reactive targets?
I would scratch looking in NJ and just focus your search in PA. If/when you find one, please let me know because I've been looking for one as well.- Breach A Door With An AR
Man, I used to love that show, Future Weapons. - New Palmetto State Armory AK - Question about NJ Compliance