Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lalo

Members
  • Joined

  • Last visited

Everything posted by Lalo

  1. Checko, if you find out about that please let me know. Since the MDTS classes were cancelled in NJ I'm looking for something else and this might fit the bill. I just don't like the low round count. 200 rds? What are we shooting for 1 hour? ETA - NM, I see the class is only 4 hours long...
  2. I applaud you for doing all this Anthony. Great job!
  3. So I think I have an idea on how I'm going to sight in the Saiga. I should be set with a 100yd zero on the #1 marking. As far as what the previous unmarked notches that exist before the 1 setting, I dont know what those are for. I was assuming maybe they're for 50 and 25 distances but can't seem to find any info on that. Why would they put notches on the sight if they're not going to be used? weird. Regarding the optic mount, I've been reading some not so good reviews on the MI mount I mentioned in my original post. Instead, people seem happier with the Attero Arms (http://atteroarms.com/). Its very similat to the MI mount but less moving parts. If/when I do decide on mounting an RDS on my Saiga, I might go with this. Only reason I'm not looking at the Ultimak is because I would then have to switch my handguard and add a 2 piece retainer or dremel my existing handguard.
  4. When I had to ship my pistol back to Sig, they sent me a pre-paid shipping label, told me to place the pistol in its factory case, case in the box and drive it over to the nearest hub. On the way back I was given the option to pick it up from the hub which I did.
  5. Loved the episode. More of the same but that's what's good about it.
  6. Only thing that sucks is that it'll only be 12 episodes. WTF!
  7. Tanners has them for $775
  8. Tanners price is considerably higher than Atlantic's non-sale price. I'm going to kick myself in the ass later for not getting this...
  9. Ohh man... You had to post this didn't you... Tanners have them for the same price? Might have to leave work early one of these days.
  10. Thanks guys. So that takes care of #1. Set the marker to 100 and sight in at that location. The graph on that thread suggests a 50/100m zero should work so I can set the marker to 1, zero it at 50 and fine tune at 100. So what about #2? Once I have it zeroed at 100 on notch #1, what are the previous notches for?
  11. But I read it on the internet so it must be true! Just kidding. Of course I'm reading info that's posted in other forums and blogs and its accuracy is going to be questionable hence the reason for my question. I know you're an AK guy (or maybe used to be), How did you zero your AK? How did you utilize the notches on the leaf, etc?
  12. So I finally picked up an AK Variant on a trade from a fellow forum member here and have a few questions hopefully someone can assist with. This rifle is mainly going to be a range toy as I'm going to rely on my ARs for training, home defense, SHTF scenarios, etc. I've already swapped out some of the existing furniture to my liking so for those of you who like the standard AK furniture and hate "tacticool" stuff please ignore the pic below. Rifle is an Izhmash Saiga in 762x39 imported by the RWC group. On to my questions: 1. Iron Sights. I probably wont get an optic for some time so for now I want to make sure I know how to use them properly. The rear sight leaf of the Saiga has 3x markers, 1,2 and 3 which correspond to 100, 200 and 300 meters. I understand the difference between meters and yards but for my instances (specifically the range I'll use), I'll be dealing in yards. It's my understanding that in order to sight the rifle in at close distances (25 yards), since the 762 bullet trajectory hits around the same area at 25yds and 200yds, I can set the marker to 2 and hit POA/POI at 25yds and be (somewhat) sighted in for 200yds. Then if I slide the marker to 1, I'll be close to zero at 100yds, and 3 for 300yds. Can someone confirm this is correct or can recommend a better way of sighting in the Saiga at 25 or 50yds? I plan on doing this, then fine tuning it @ 100yds while the marker is set to 1. 2. Sight leaf notches. In addition to the notches for the 1, 2 and 3 settings, the Saiga sight leaf has other notches before the 1 setting. What are these for and how are they used? Once sighted in (1 for 100, etc), is the previous notch for 50yds and the one before that for 25yds? Maybe they're not used at all? Should I just keep the notch on 1 for 100 and just offset my sight picture when shooting at 25yds and 50yds? 3. Optic mounts. Been reading about some possible options for my application. I know the Ultimak mount is very well liked and works but I'm not sure how I'm going to like the added weight to the front of the rifle or if it will affect my shooting at all. The other thing with the Ultimak is that I would have to either trim down or replace my existing handguard in order to fit the mount properly, plus I would have to re-zero my optic whenever I remove the Ultimak to clean the gas tube (I understand you don't really have to clean it often). I know there are plenty of other side-mounted optic mounts out there to choose from but I wanted to get people's thoughts on the Midwest Industries AK Mini Dot Mount, specifically the MI-AKMDM. From what I've read and seen reviews on, it's a nice solid mount that retains zero when tightened properly but it's not meant to be abused. The reason I'm leaning towards this is because I like the low profile of the mount itself plus it brings the optic towards the center of the rifle (instead of all the way to the back or all the way to the front) which could assist in the overall balance of the firearm. Since this is just a range toy I'm not coo concerned about it not being rugged and "combat proven" since like I said earlier, I'll rely on my AR's for training, HD, etc. Any thoughts would be appreciated. Thanks!
  13. Do you think you'll have enough room on that mount for the Strikefire and magnifier?
  14. Tapco Intrafuse.
  15. Picked up this Saiga 7.62 already converted from a fellow forum member on a trade. Couldn't keep the Tapco stock and grip on for long. Can't wait to shoot this.
  16. Of course. I cancel my order with S&W last night, go to order this morning and they're gone! If anyone picked up a couple extra and are willing to part with one pls shoot me a PM.
  17. Damn, if distributors are getting them then S&W better fulfill my back order soon...
  18. Yes. 15-22 takes a milspec FCG.
  19. Actually cancel that. Just got an email from Chris saying he had to cancel all his NJ classes this year. I'm totally bummed. However, he will have some classes in Eastern PA so I will be attending those.
  20. I ended up purchasing the JP Reliability Enhanced Spring Kit to go with the ACT and the setup worked beautifully, exactly what I was expecting. It has a really smooth trigger pull with very little/almost no creep and breaks extremely clean. Reset is also crisp and audible. The trigger weight felt really good for an all purpose range/training/HD rifle. Overall very happy with the setup compared to the standard milspec triggers I had on my other AR's. I'll probably pick up another one for my 15-22.
  21. MDTS has a couple of carbine classes coming up that I highly recommend.
  22. Lalo replied to Rob0115's topic in Shotguns
    How much was the Saiga12? They tend to mark things up pretty steep.
  23. Soon it'll be who has the smallest group...
  24. Click on the trigger and off you go. Highest I could get was 29. http://deti.mil.by/templates/swf/Pistol/index.swf
  25. This thread might have some relevant info... http://njgunforums.com/forum/index.php/topic/52111-free-float-rail-suggestions/page-2?hl=+free%20+float

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.