Everything posted by Lalo
-
How users of different rifle types view each other (humor)
That pic of the chubby dude in tac gear is the best!
-
7 min zombie related short film
He though of a very good solution to the problem. But what if he was in an area more populated with zombies? I'm sure they would just have a field day with it strapped to his back like that. Another option would have been to maybe fasten the harness high on a street light or tree, out of reach of the other zombies. But then you would have to hope that someone will pass by and hear the baby crying.
-
Explosions at Earle 04/10/13
Are we under attack? /tinfoilhat Seriously, has anyone called the local PD to confirm this was the testing they were talking about?
-
I need to get one! (Uruk-Hai Scimitar)
I am a huge Harry Potter fan.... huge....
-
Top 5 gun shootouts in movies
Heat has been one of my all time favorite movies since I saw it in the theatre back in '95.
- Daily humor thread
-
I need to get one! (Uruk-Hai Scimitar)
I never knew they were so versatile. Not only does this person show you some of the many uses, but I bet it could also work as a home defense weapon...
-
I better get to saving.
I would totally rock a mug like this. I bet I can make one for a fraction of the cost... Summer project time!
-
Need advice on which BCG to keep
BCM should have all the parts you need - http://www.bravocompanyusa.com/AR-15-Upper-Receiver-Bolt-Carrier-Parts-s/2.htm For some reason the firing pin retaining pin is hard to find on their site. They should have it though I just ordered that from them a couple weeks ago.
-
New Frontier LW-15 Builds
Whatever you do, dont do what this guy did: http://www.ar15.com/forums/t_3_4/609135_AR_15_New_Frontier_Armory_Stripped_Polymer_Lower_Review.html Fit and Finish First the bad - So I first received my lower and began to notice a few things. The holes for the front and rear take down pin, magazine catch, and safety were all a tad too small to fit the pins, safety or magazine catch in to function correctly. For the front and rear pins, the metal quick release pins I had bought were way to sticky to slide in and out correctly. They would have had to be hammer and punch tapped out every time in order to release the upper. To fix this I took out the trusty dremmel tool and slightly enlarged them until the pins would slide in and out smoothly. Same thing for the safety selector holes. Both were too small for the safety selector to slide in and out and turn smoothly. Again used the dremmel to enlarge the holes until it fit correctly. The magazine catch as well fit too small. On the portion where the catch goes into the receiver, the top part needed to be shaved down so that the catch would be able to slide in. Only remove a little material at a time. Keep test fitting until it actually fits. Don't go too crazy with it. Pins for Hammer and Trigger I decided to use a spikes tactical nickle boron battle trigger group. My bolt carrier group is also nickle boron coated so the matching trigger group was a good choice I think. For the pins to hold in the trigger and hammer I like to use anti walk pins. I decided to take a chance and bought this set of pins from brownells. This was a mistake. http://www.brownells.com/rifle-parts/triggers-bottom-metals/hammer-parts/hammer-pins/ar-15-anti-walk-pins-prod7589.aspx I bought the small size which is what you need if your not putting them in a Colt lower. What brownells does not mention is that these pins are oversized. They measure out at .156 instead of .154. This was the downfall of my project. When I went to install these pins in my hammer and trigger and into the receiver, they fit extremely tight. I mean extremely. The hammer pin went in at first after much pounding with the punch. The trigger pin unfortunately, did not. It was so difficult to install that I should have stopped and realized that it was not right. It had also worked itself slightly out of alignment because of the pounding it was recieving to get installed. Instead it ended up putting the pin right on through the lower receiver making itself a new hole. I am partly to blame for not stopping, but also I am sure this kind of damage would not have happened on an aluminum lower. The real issue here was that the pins were very hard to get into and out of the hammer and trigger pin holes. The polymer lower holes were fine. But because of the force required to get the pins to go through the trigger and hammer, the actual trigger and hammer smashing against the side made the new hole here. DO NOT USE THOSE OVER SIZED PINS IN YOUR POLYMER LOWERS!!! You will ruin the lower. Either on putting them in or taking them out it will get ruined. Instead use regular sized pins like the ones I used afterward that Ill talk about below. Customer Service Time I emailed New Frontier Armory customer service and sent them a few pictures of the lower that I had taken. They in turn told me they would make it right and I would be taken care of. That they back their product 100%. This was a relief to hear. Clearly I had damaged the lower and all they asked was I fill out a form and ship the lower back to them. I did that and it took them 1 day after they received it to ship me a new lower via USPS. After I had finished emailing with them on the original damaged lower, they asked me to strip down the lower again and ship it back to them. Upon taking out the hammer pin it was so tight in the hammer that tapping/pounding it out not only bent my heat treated steel punch but sent the entire pin hole face of the hammer through the polymer upper. I had to then wiggle the hammer out of the upper, pin still inside, mount the hammer in a vice and pull/punch the pin through severely damaging the pin. The hammer was fine though. This was obviously a way too tight pin but I still think an aluminum upper would have held up to the force used. I shipped off the old lower, pieces and all and the new one came quickly. The new lower though did not have the same serial number that the old lower had. Obviously they had to send me a new one but I would have thought it would have had to have the same serial on it. In any case I was very impressed with the timeliness and quality they offered in their customer service.
-
7 min zombie related short film
A nicely produced short film. I found it worth watching. How would you handle the situation?
-
Toronto - 19yo man sexually assaulted by group of women
I'm not sure what to make of this. It's kind of like the story of the high school boy getting raped by the hot 20-something substitute teacher, but not really. 5' 4" 200 lbs... I know a few people who probably wouldn't have fought back. Toronto police investigate sex-assault against 19-year-old man by group of women Read more: http://www.nydailyne...8#ixzz2PuGV6MQO The man said he met four women at a downtown nightclub March 31. Although they offered to drive him home, they instead took him to a parking lot and sexually assaulted him, he told police. He described the women as around 5 feet, 4 inches and 200 pounds each. Monday, April 8, 2013, 9:53 AM The Queen Street West and Spadina Avenue neighborhood in downtown Toronto, where a 19-year-old man said a group of women sexually assaulted him at a parking lot. Police are searching for four women accused of sexually assaulting a 19-year-old Toronto man after leaving a downtown nightclub last month. The man told Toronto cops that the group had offered to drive him home in their silver Honda SUV early March 31, but instead stopped a few blocks away at a parking lot, the National Post reported. Police wouldn’t provide details of the alleged sexual assault, but said the man decided to come forward last Friday. He described the women between the ages of 30 and 36, each around 5-foot-4 and weighing 200 pounds. They also wore short black dresses, high heels and no pantyhose, according to CHCH News. Police said the man didn’t sustain any physical injuries. “It’s very important (that victims come forward) because if they don’t, then there is no record of it ever happening. ... I think he’s very brave,” Toronto Detective Constable Shannon McParland told the QMI Agency. Male sex-assault victims rarely make complaints because of the stigma attached to the crime, experts say. In the majority of cases, women are the victims and men are the attackers, said Nicole Pietsch of the Ontario Coalition of Rape Crisis Centres. “Other men will say for example, ‘Oh, he’s so lucky,’ like that was actually a positive thing when it wasn’t,” Pietsch told the National Post. “I think that that just feeds into the myth that sexual violence is something the victim wants.”
-
AR selector/safety switch?
Battle Arms Development makes nice ones if you're looking to change things up a bit. The part itself is pretty cheap so you can also purchase a spare and use a Dremel to come up with your own design. For the safety lever through, I would keep it as simple as possible because the main thing you want to worry about is how it FUNCTIONS and that it works properly.
-
Wrestlemania
Wait.... Wrestling is not real?
-
Cool Pictures
- Daily humor thread
- Magpul Announces shipping of 10rd Pmags
Folks, this is not a bulk buy thread. Like of farmer said, we need to find a distributor that is going to carry them first, then someone car organize the bulk buy. I shot MidwestPX a PM and he said that he has had them on order for a while but no ETA as of yet. I would sign up for his newsletter cause I'm sure he'll keep everyone informed once he has the in stock. I would also start calling your local shops and ask if they're going to carry them when they're available.- Someone Shot PA Gun Range
Ugh, hope it wasn't a member from here.- Daily humor thread
- Daily humor thread
- Daily humor thread
- EFGA Range
Why because it's a secluded area next to rail road tracks by the back roads of PA? I can understand why people might think that, but I've never felt that way while being in that range. Besides, I'm no sure too many people are dumb enough to try to mug or rob someone at a gun range in PA when they SHOULD]/i] know that people can carry and are most definitely armed.- Woodland Park Range
Place looks amazing. I've peeked through the windows a couple of times and I don't think it'll be a disappointment at all. Even though the membership prices are too high for ME, I'll still shoot there just like I still shoot at the Bullet Hole and RTSP in order to support the local ranges. Say what you will about the prices, the truth is this range will be packed with people and people WILL pay to play.- Magpul Announces shipping of 10rd Pmags
Lets see how long it takes for shops to actually carry them.- AR pics, lets see'um!
Here's how my ARs currently sit.
Account
Navigation
Search
Configure browser push notifications
Chrome (Android)
- Tap the lock icon next to the address bar.
- Tap Permissions → Notifications.
- Adjust your preference.
Chrome (Desktop)
- Click the padlock icon in the address bar.
- Select Site settings.
- Find Notifications and adjust your preference.
Safari (iOS 16.4+)
- Ensure the site is installed via Add to Home Screen.
- Open Settings App → Notifications.
- Find your app name and adjust your preference.
Safari (macOS)
- Go to Safari → Preferences.
- Click the Websites tab.
- Select Notifications in the sidebar.
- Find this website and adjust your preference.
Edge (Android)
- Tap the lock icon next to the address bar.
- Tap Permissions.
- Find Notifications and adjust your preference.
Edge (Desktop)
- Click the padlock icon in the address bar.
- Click Permissions for this site.
- Find Notifications and adjust your preference.
Firefox (Android)
- Go to Settings → Site permissions.
- Tap Notifications.
- Find this site in the list and adjust your preference.
Firefox (Desktop)
- Open Firefox Settings.
- Search for Notifications.
- Find this site in the list and adjust your preference.