Everything posted by Lalo
-
Borrow - AR15 Upper Vise Block
Does anyone in the Northern NJ/Morris County (Parsippany) area have an upper receiver vise block I can borrow for a few days? Thanks!
-
free float rail suggestions
Can anyone post pics of their Alpha rail installs and note the size you have? I'm torn between a 11" or a 13".
-
free float rail suggestions
If the break is permanently pinned and welded (like all of ours should be in NJ), you wont be able to slide off the FSB. You can get away with removing the handguard cap by just slicing one end of it then bending it out. Have to have a steady hand with the dremel though.
-
free float rail suggestions
You and I are on the same boat. A2 front site, comp already pinned and welded so it can't be removed to be ground down. You're going to have to grind the sight down while its still mounted so you'll have to be real careful. You'll have to use a Dremel to cut the delta ring, spring and retaining ring. All that looks and sounds easy, there are plenty of videos on YouTube on it. Since you can't remove the FSB, you're not going to be able to remove the barrel nut to replace with a proprietary one that works with a rail. You'll need a one piece free float rail that uses the stock barrel nut to mount. Right now,I'm leaning towards the Troy Battle Rail http://www.rainierarms.com/?page=shop/detail&product_id=3194 Or the Troy Alpha Rail http://www.m4carbine.net/showthread.php?t=103591 http://troyind.com/%20/rail-systemsaccessories/rails/ar15m16-rails/free-float-rails/troy-alpha-rail®-13″-no-sight
-
free float rail suggestions
Fortis REV http://www.rainierarms.com/?page=shop/detail&product_id=3366 DD Omega http://www.rainierarms.com/?page=shop/detail&product_id=1117 Midwest Industries http://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=422 Centurion http://www.rainierarms.com/?page=shop/detail&product_id=2509
-
PSA LPK w/o FCG - special price $29.99, normally 49.99
Not a bad deal at all. Not the best parts in the world, but they work. At best they could be used as spare parts but a lot of people are looking for these. PSA must have ordered thousands of these when they were short and are now probably thinking "what do we do with all these?"
-
Guy pulls gun in road rage incident.
- Someone stole a box of ammo of my porch, I'm gonna get them.
I'm staying tuned.... You'll either see this: http://youtu.be/ha9_xSd2NGY Or this:- NJ Militia?
right, I thought I was already a member of one.- Luciano's-Lodi/West Paterson
How are the prices for the ARs though? I've seen a few around, but none below $1500.- My first shotgun
- Legality of .22LR Pistol "AR" in NJ
It's more than 50 oz. I was just there talking to the guy again and I pointed out some of these items. I mentioned the weight, he said "its not a 223, it's a 22lr. Don't have to worry about that". I thought a pistol was a pistol, max weight of 50oz right? "not if its a .22". Ok, what about the shroud, can't have anything covering the barrel, he said the same thing again, ""its not a 223, it's a 22lr, I've had state police in here looking at this gun and they saw nothing illegal about it". So yeah, I think I'm going to stay away, even though there was a cop there before and he said it was fine. Who knows he could have been the owner's buddy or just clueless. NJ, your restarted laws defeat me yet again... "the shoulder thing that goes up"- Legality of .22LR Pistol "AR" in NJ
His response to the handguard issue, "It's not a handguard, it's a rail".- Legality of .22LR Pistol "AR" in NJ
So in my other thread we discussed the legality of the S&W 15-22P and determined that it was illegal. Since I'm still looking for something similar, I came across the HK 416 .22 LR Pistol. I began talking to the shop owner and he swears up and down that this pistol is NJ legal. A cop was there at the shop as well and he concurred as well (but what does he know, right?). Since this pistol is very similar to the S&W 15-22P and that was determined illegal in NJ by the masses here, I need your thoughts on this HK before I pick it up. What say you? Magazine capacity is 10 rounds btw. Specifications Caliber - .22 L.R. Capacity - 10 or 20 rds Mode of Fire - Semi-Auto Barrel Length - 8.5 in (216 mm) Barrel Twist - 1 in 13-3/4 in Rifling Grooves - 6 Rifling Length - 13.78 in (350 mm) Front Sight - Fixed - Removeable Post Rear Sight - Adjustable - Windage & Elevation Overall Length - 17.5 in (445 mm) Overall Height w/Mag - 11.4 in (290 mm) Overall Width - 3 in (75 mm) Stock Style - N/A Trigger Type - Single-stage Trigger Pull - 6.6-9.9 lbs Safety Type - Manual Principal of Operation - Blowback Muzzle Thread - M8x.75 Length of Pull - N/A Sight Radius - 10 in (255 mm) Diameter Rear Sight Aperture - .1 / .12 / 0.14 / 0.24 in Front Sight Width - .06 in (1.5 mm) Weight w/out Mag - 4.9 lbs (2200 g) Weight of empty Mag20 - 6.8 oz (190 g) Features - Upper and Lower Metal Receivers - RIS-Rail Interface System - On-Rail Sights- 1 gun per month law, please explain.
This. So take a look at your last used permit and look at the date of purchase field. 30 days from there. Remember its not from the 8th to the 8th. Count 30 days on a calendar. Some months have less than 30 days, some more, etc.- Custom Shotgun stock
It might cost you more to have someone cut your existing stock then just buying one off the shelf. You might be better off cutting it yourself then getting a recoil pad to cover up the cut. What type of gun and what LOP are you looking for?- How many guns make a collection?
That's probably a fraction of BLF's collection...- My Primary HD passed its test today
Nice dogs! I would love to own one but I think I'll die of an allergy attack because of the fur. I'm good with labs though, just don't think I can handle the Husky. Dam you allergies!- Ammo is here*** Closed ** Shotgun Target Load Ammo group buy
AFAIK, all ammo is in, just have to coordinate with Bryan to pickup. I got mine the day after he said he got it.- Pined Stock Question
If I ever have to pin a Magpul stock again, this is what I'm going to try. http://www.ar15.com/forums/t_3_4/607375_How_to_pin_an_MOE_Stock__for_ban_states_.html Originally Posted By pedzola: As I'm sure is the case with many of us here, I've recently completed a new AR15 build. Unfortunately, being in a ban state, I had to decide how to address CT legal requirements with an AWB-compatible stock. As the selection of non-adjustable rifle stocks in the market leaves much to be desired, I decided to get a Magpul MOE stock and pin it to my preferred length. There are a number of methods out there, but I think I found a perfect way to fix a stock that... 1) permanently fixes the stock to the buffer tube in a way that I believe would pass scrutiny, 2) does not damage the stock or the buffer tube, and is reversible, 3) and can be adjusted with simple tools in a few minutes if you need to change the stock length. [span style=font-size: 12pt] Instructions: 1. Disassemble the pin mechanism of the stock. Use a punch and hammer to remove the roll pin holding the mechanism in place. 2. Note that a .223/5.56 cartridge is approximately the same size as this mechanism. An empty cartridge is the basis for your new stock pin. 3. Push the shell into place in the stock, and mark it with a punch in order to act as a guide for drilling a hole. 4. Drill a 3/32" hole in the shell where you marked it. I used a 1/16" bit to start and then drilled out the larger hole after. It can be tricky to drill straight, best to use a press with the shell firmly held in place. 5. Next mark the shell about a centimeter off the end for cutting. 6. Cut the shell with a pipe cutter (or hack saw, or whatever else you can cut it with...) 7. Cut a couple of small piece of heat-shrink tubing, and heat-shrink them over the end. This makes the diameter of the cartridge neck a little wider to fit in the stock holes better. 8. Test fit the shell, perhaps wrap some tape around or add another layer of heat-shrink tubing if it needs a little extra. I find 2 layers of heat-shrink is fine. 9. Test fit the cartridge in your stock. Alternately, you could paint it first if you prefer black (or some other color) to the brass, which will show on the side of your stock. 10. Hammer the roll pin from the stock back through your new cartridge pin. DONE. You now have a fixed stock, in whatever position you decided to attach it. [/span] Note that I am not providing legal advice, however it is my humble opinion that this is now an acceptable fixed stock for CT, and probably other AWB states. It will require a hammer and punch in order to change the position of the stock, and cannot be done by hand. As for the strength of this pin, it's just a brass cartridge so I wouldn't go slamming the stock on the ground. But it works for me for everyday use. Any feedback? Hope this will be useful for some folks. I made some spares if anybody wants one. Not free, but inexpensive. PM me.- Help with a math problem? Ver. Impossible?
Hmmm... What if we put this into terms we can relate to... Jimmy-Bob walks into Cabellas with $50. He buys a can of CLP and cotton patches, the cotton patches are 2x the cost of the can of CLP. He spends half the remaining money on a 15/20 PMAG and leaves with $15. How much does each item cost? ...I still hate math...- The Walking Dead
Whatever happens, I just hope these last two episodes don't disappoint and they actually go through with the plan and finally take action. I really hope they don't end the season in a cliffhanger before any action takes place. It needs more action!- Help with a math problem? Ver. Impossible?
My brain hurts- So this is where my backordered PMags are...
My apologies if this was posted already, but here's a quick and rare glimpse inside our favorite magazine manufacturer: http://www.guns.com/2013/02/26/sneaking-peeks-at-magpuls-production-lines-12-photos/ I figured with all the hype and orders they have to fulfill, there would be an army of people working there...- Help with a math problem? Ver. Impossible?
Talking with my niece this afternoon who is a sophomore in HS and started discussing math problems. She threw his question at me and for the life of me the more I think about it, the more it doesn't make sense. So now I need the help of all the NJGF math gurus out here to figure it out. Please show your work...lol Suzy walks into a store with $50. She buys a shampoo and lipstick, the lipstick is 2x the cost of the shampoo. She spends half the remaining money on a purse and leaves with $15. How much does each item cost? ...I hate math... - Someone stole a box of ammo of my porch, I'm gonna get them.