Everything posted by OfcrFek
-
M&P 15-22 Barrel Shroud
Single point that attaches at almost the pad of the stock. Hangs rather low, even when tight around my upper body. I was leaning forward as I ditched the Storm and stepping forward at the same time, and it swung down and hit me good. http://www.urbanertslings.com/beretta-cx4-storm-with-cx4-storm-adapter-mash-clip-and-optional-rsa/ it's kinda like that, but instead of the attachment point being right by the hole, it's further back, closer to where that buckle is.
-
Other Gear
http://www.dailymail.co.uk/sciencetech/article-2551686/The-pocket-sized-gadget-seal-gunshot-wound-15-seconds.html This is pretty nifty... although not available to the gen public yet... And I bet it hurts like a b*tch!!!
-
Upper to P.A.?
In case any of you guys were curious how it turned out. Thanks for all the help!!
-
Sig mosquito
That explains immediate action! Slap the mag!
-
+1 to JT!
I thought you were away doing military stuffs for the next couple weeks! BTW, I have JT's business card for you when I see you next. And I will be back there periodically for more receivers. I'll hit you up next time I do.
-
+1 to JT!
Nice guy who's very knowledgeable about what he sells. Picked up my stripped lower from him today, and when he found out it was my first real build, he took a few minutes to give me some advice on certain tricky parts. He also went over the lower with a fine tooth comb before he gave it to me to make sure where weren't any knicks or blemishes. Even though it's a haul from my house, I will be using JT Custom again in the future!
-
Upper to P.A.?
Just ordered what I'm gonna use... http://www.jsesurplus.com/Del-Ton16M41x75.56ChromeLinedCarbine.aspx With a YHM 5M2 compensator, flat front. Thanks everyone for your help, I'll deff post a pic when it's done! If this build goes well, I'm probably gonna make another for myself.
-
Upper to P.A.?
Well, that one I linked says 'includes sight tower, sight parts, swivel, barrel nut & handguard cap' and the pic shows them on the barrel, but I dunno if they come on it or as a parts kit and I have to put it together... I really don't want to have to get the front sight base/gas block installed when I get it, I'd prefer it already be done.
-
Upper to P.A.?
http://www.jsesurplus.com/Del-Ton16M41x75.56ChromeLinedCarbine.aspx Had I just scrolled down. Lol. Later today I'ma give them a call and find out if the gas block/front sight is already on the barrel... cuz I don't wanna have to drill and taper pin that thing on, lol. Do barrels normally come already on, or as parts and you have to get it put on?
-
Upper to P.A.?
I can't really see anything atm, as I'm currently at work taking a lunch break, and this comp won't do pics and some links. I did check out that JSE Surplus a second ago. That's deff more my price range. I was finding on the sites that won't ship here barrels w/ the a2 front sight base/gas block for approx $160 so i was hoping for that with a max of under $200... I believe I have a barrel nut, delta ring assembly, handguards, and handguard cap, so technically I don't need them. I'll grab a $15 gas tube from somewhere. I'm trying to make an AR for my father in law, something that is close to his M16 from vietnam, but just smaller (like a modern AR). I already have the lower done with an A2 solid stock, and I have everything for the upper minus the barrel/gas block assembly, and the BCG/charging handle. Liking this off the JSE Surplus, but is the lack of chrome lining really important? http://www.jsesurplus.com/16M41x7Nitride5.56BarrelwithFrontSightBase.aspx
-
Upper to P.A.?
As checko said, if mailing and working on it in NJ in a place that can't readily make it into a full noncompliant weapon is legal, then I'll mail it to one of my parents, make it compliant there, then bring it back to my house. Problem is a lot of places that are selling the parts within my budget (MidwayUSA, Cheaper Than Dirt, Sportsmans Guide, ect.) flat out won't ship that stuff to NJ. I know I should go with a more reputable company anyway (like BC like Checko suggested), but I simply don't have the money for that right now and am not sure when I will.
-
Upper to P.A.?
Maybe... He's a big gun guy too, so I don't think it's that, but you never know... So I can have a non compliant upper in NJ, as long as I don't have a lower in the same household or area to readily make it a fully (noncompliant) functional rifle? I was trying to order either parts (barrel, comp, gasblock) or a full upper off Cheaper than Dirt, but they said they won't ship to NJ... Do all websites ship if you explain it to them, or do only certain websites allow you to do that? I can ship it to my mom, and make it fully compliant in her garage and bring it to mine if that's the case, she doesn't own any firearms.
-
Upper to P.A.?
So I have a friend that recently moved to PA, and I asked him if he minded if I bought a non-NJ compliant upper, if I had it shipped to him, and when I went to hang out with him I'd make it NJ compliant and bring it back home with me. He told me he recently talked to his local PD in PA for whatever reason, and they actually told him in PA they have to ship uppers through an FFL now. Not only uppers, but barrels and things of that nature also. I've never heard of such a thing, and when I went to search on the internet for something about this, but couldn't find anything. This guy just BS'd my friend, didn't he? Sorry if this is in the wrong section, not really sure where it belongs...
-
Yugo Ak with 20 mags(single stack)-$450
Think I paid 400 for mine 3 years ago... but it deff didn't come with 20 mags! That woulda been nice!!!
-
Troy rear folding battle sight $69 & other good deals
Great. Now I just ordered a bunch of stuff. I didn't WANT to... but it was all so cheap!!
-
Need Advice on the Lightest possible AR build
Lucky. They were all sold out by the time I got around to picking one up.
-
Need Advice on the Lightest possible AR build
Is that an Umbrella lower??
-
Need Advice on the Lightest possible AR build
I know a lot of people on here don't seem to like them, but I have a Bushmast Carbon 15, and I have no complaints about it. And it weighs in at a little over 6 pounds, and is fairly cheap for a NJ compliant version... That is if you don't wanna build it yourself. http://www.budsgunshop.com/catalog/product_info.php/products_id/80172/Bushmaster+90806+CAR15+10%2B1+223REM5.56NATO+16%22+ORC
-
Anybody own a Lucid HD7 Red Dot
I actually bought mine off Amazon, and if I sent it back to Lucid, I wasn't sure I'd get it back in time to send it back to Amazon if something was seriously wrong with it, so I just returned it to Amazon and told them to send me another. I got it yesterday (lightning fast... Ordered on the 13th, got the defective one the 15th, returned the defective one the 15th, got my new one the 17th. And that was with standard shipping!) and it seems to be better than the previous one I got. My only complaint from the first one was it wouldn't zero, and this one does, so... lol. I LOVED everything else about it... durable, multiple reticles, and the auto dimming/brightning feature of the reticle(was very quickly responsive and very accurate at determining how bright the reticle should be). I'm a little leary of purchasing stuff like this off Amazon, cuz I hear a lot about counterfits, so I don't wanna talk to badly about them in case I actually did get a counterfit. That's one of the reasons if this one starts acting up, I'll send it to Lucid instead. I'm sure if anyone would be able to spot a counterfit, it would be them. Haven't gotten to take it to the range yet, hopefully I'll get to take it either today or tomorrow, and put a little more info up on here about it.
-
Anybody own a Lucid HD7 Red Dot
I just bought one of these and the damn thing wouldn't zero. HAD to be defective... I've heard tooooooo many good reviews on this optic for that to be common. .....although that doesn't make me any less pissed off that I now have to wait another week for my replacement optic... sigh....
-
Cool combo light mount/front sight.
Maybe I'm mistaken, but isn't that a little like shining a headlight down a drinking straw? I know your target will have the beam on it, but isn't a lil ambient light a good thing?
-
Sig mosquito
Is this the sucking joke? lol I'm getting another permit sometime soon, I may end up getting a Walther P22. Smaller, fits nicer in my 5' 1" wife's hand. lol.
-
AR pics, lets see'um!
No, just a crowned barrel.
-
AR pics, lets see'um!
Action shot!
-
Changing out my EAA Zastava PAP Thumbhole Stock
I don't think I'm going to change out the trunnion. Might go this route: http://riflestocks.com/store/product35.html - to the receiver http://riflestocks.com/store/product29.html - to the adapter http://www.cheaperthandirt.com/product/2-MPIMAG404FDE - to the adapter via buffer tube Thoughts?