Everything posted by OfcrFek
-
H.R. 218 and States with smaller mag cap laws
So wait, I feel dumb asking this, as I feel it's been said at least 30 times in this thread alone.... Is an ACTIVE LEO, from the state of NJ, allowed to carry HP ammo in NJ? And can someone link the lines they found this in IN HR218 for me? I've combed over this thing at least 20 times, and I can't find anything about prohibited or unprohibited ammo types....
-
Bushmaster CAR15 Gas Block Size?
Yea, it looks like I'm gonna have to change out the hand guard. Probably going to do what this guy did when I get the money. http://www.ar15.com/forums/t_3_118/550889_Bushmaster_Carbon_15_Superlite_Freefloating_handguard.html Thoughts on this?
-
Bushmaster CAR15 Gas Block Size?
I'm fairly certain I found the size (.625) but I'll deff call them before I do any parts ordering. Unfortunately, in a quick search, I can't find any quad rail gas blocks in that size, so I may need to go with a quad rail fore end anyway.
-
Bushmaster CAR15 Gas Block Size?
Just got my first AR! Bushmaster Carbon 15. http://www.budsgunshop.com/catalog/product_info.php/products_id/80172 So now I have a question... I want to replace the stock gas block with a quad-railed one, so I can attach a flip down front sight, and a couple other accessories. Everywhere I go, it says the only way I can be sure of the size I need is to remove the current gas block and measure the hole. Is there any other way? I'd really rather order the gas block, and put it on when it arrives, only taking it apart once. And to be honest, I'm not all that confident I could accurately measure the hole. Any advice would be greatly appreciated! Also, I feel I have to say this since you can't tell from the picture, that's a PERMANENTLY PINNED 15 round mag, NOT a hi-cap 30 round mag! Purchased from RifleGear.com!!!
-
Remington 870 Zombie Hunter Stock Set
http://www.brownells.com/shotgun-parts/stock-forend-parts/adjustable-stock-parts/buttstock-forend-sets/brownells-zombie-hunter-stock-forend-prod53475.aspx A little expensive, and the fore end required a little bit of modification to fit with my barrel and side saddle, but ultimately it works. And the stock collapses, allowing me or my 5' 1" wife to comfortably hold it with the push of a button. They have sets that fit Remington 870's and ones that fit Mossberg 500's.
-
Old Remington 870 refinishing complete!
Looking at how I worded that, I'm realizing it sounds like the receiver was broken. That wasn't the case. The duct tape was there to keep the trigger pins from falling out, as for some reason, they were ever so slightly smaller than the pin holes. Side saddle bolts fixed that. Sorry bout the confusion!
- Advice on Cold Bluing an old Remington 870
-
Old Remington 870 refinishing complete!
Well, on June 10th I started researching and planning how to refinish and restore an old Remington 870 to its previous glory. 10 days later, I'm finally finished! Now I'm by no means a professional, and this was the first time I've ever tried to do this kind of work on a firearm, but I think it turned out ok... I used Birchwood Casey's Cold Bluing Kit to strip all the rust and old splochy bluing off the barrel, receiver, and mag tube. Reblued it all with the same kit, doing a lot of work with some steel wool in between coats, and using my girl's shower set to the hottest it would go to rinse all the compounds off after the allotted times. This is pre and post re-blue of the barrel: The stock was a little more difficult. I used some stripper agents to remove the old finish on the stock set. Then used a wet rag and iron to make the more serious dents pop back out. Then I took a sanding block to remove what finish was still there, and even the stock out over all (220 grain). Afterwards, I wiped the whole stock set down with some denatured alcohol a few times to clean it, and let it air dry. After I was sure it was dry and clean, I started applying the layers of stain (I used Gunstock 231 by Miniwax). Applied 3 layers of stain over about a 16 hour period, then let it completely dry for another 16 hours. After that, I applied a spray on Clear Semi-Gloss Polyurethane sealant (3 thin coats over about 6 hours), then gave it about 20 hours to completely dry. And bam, done. This is the overall firearm: Yes, that is duct tape holding the receiver together in the before pictures. Lol. A special thanks goes out to Cowboy6373, Old School, usnmars, siderman, and Hare Trigger for all their instructions and advice on how to go about doing it!
- Advice on Cold Bluing an old Remington 870
- Advice on Cold Bluing an old Remington 870
-
Advice on Cold Bluing an old Remington 870
Wow, thanks for the quick and in depth responses! That kind of sucks that the receiver might be aluminum, I don't know why I hadn't thought of that... That's actually the main piece I would like to get done asap, as I actually just bought a new stock for it yesterday and a new barrel a week ago... At the moment, it's kind of my HD/range shotgun, but once it's completely restored, I'd like to put all the original parts that came with it back on. After I remove the stock, fore end, barrel, spring, trigger assembly, and bolt, is there anything else I have to try to keep the blue/duracoat from contacting on the inside of the receiver/shell tube? EDIT: Just did a little research, and apparently (at least on the 3 websites I found), Remington 870's ONLY come with steel receivers, and are currently the only type/brand of shotguns that using an all steel receiver is standard on.
- Advice on Cold Bluing an old Remington 870
-
Advice on Cold Bluing an old Remington 870
So my awesome fiancee bought me an old Remington 870 for our anniversary (even though she's not all that keen on guns being in the house) for about $100 at the range I go to. I'm thinking I'm going to try my hand at restoring it a bit. The thing is in pretty rough shape visually... Was going to use a Casey Bluing/Stock Restoring Kit, and reblue the whole thing, and restore the wood stocks. ...any advice for someone who's never done this before? If I get a chance, I'll upload a pic or 2 of the gun now... It literally has duct tape on it in some places holding it together....
-
Will my shotgun be illegal
Thank you kindly, sir
-
Will my shotgun be illegal
I'm kinda still new to the whole firearms thing, so lemme see if I understand this... This: http://www.brownells.com/shotgun-parts/stock-forend-parts/adjustable-stock-parts/buttstock-forend-sets/brownells-zombie-hunter-stock-forend-prod53475.aspx would be acceptable on my new 870 here in NJ, even though this stock is a 4 point collapsing stock, because it's a pump rather than semi...?
-
Pined Stock Question
Ait, this is a little off topic, but I'm trying to get a pin out of a stock. More specifically a S&W M&P 15-22 pinned 6-point stock. From what I understand, there is no spring in the tube like a real AR, it's just hollow. I was told by the shop I bought it from I can remove it by drilling through the opposite side, and poking it through. Quite frankly, I don't want to do that. I somehow got it out before with no tools at all, and like an a$$hole, put it back in before putting on the 1-point sling adapter I bought. Now I can't seem to get it back out for the life of me, no matter what tools I try to use. ....any suggestions....?
-
Beretta CX4 Storm Sling
actually, here's a youtube video of how to attach the harness so you can see how the harness itself holds the carbine.
-
Beretta CX4 Storm Sling
kinda gets a lil' pricey but check this site out. about halfway down the page they got a harness to attach a 1 point sling to a storm. literally just got mine in today, and altho i havent gotten to run around in the woods behind my house yet with it, im rather happy. seems very sturdy, and very easy to manuver. http://www.urbanertslings.com/ursiposlla.html
- I want this shotgun!!!
- DoubleStar Corp Zombie-X from ShotShow 2012
- DoubleStar Corp Zombie-X from ShotShow 2012
-
Fake eotech
tis an aimpoint.
- My Zombie Defense Box
- My Zombie Defense Box
-
Fake eotech
I bought a EoTech holographic clone from a shop on Ebay a couple months back. I think I paid $50 with free shipping. Recently replaced it with a name brand red dot sight due to the bulkiness of the holographic sight on my rifle (Beretta Cx4 Storm 9mm). Low and behold, the knockoff EoTech held zero better than the name brand red dot currently on there. Who'da thunk...