Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

JT Custom Guns

NJGF Vendor FFL
  • Joined

  • Last visited

Everything posted by JT Custom Guns

  1. For weed wackers & blowers - I highly recommend Echo. I think they are a better value than Stihl and are commercial grade. Echo is avail. at Home Depot. For a walk behind - I would go with Honda, but that's based upon my neighbors who have walk behinds. I have a rid-on and I love my Husky (Husqvarna) it's bullet proof (pardon the pun) Good luck!
  2. Great question! I cannot find a direct answer to this in the NJ Statutes, but in general the action (frame, trigger & block) would be considered the firearm. That being said, NJ does not recognize antiquties as being exempt from local law, so if you have paper (COE) on the rifle I suggest you move the action as the rifle and sell the remainder parts. If you have no paper - just sell it and be done with it...............
  3. I called - they again, were very polite! Just wish I had his cell phone number................. lol
  4. PM sent........................
  5. There is nothing better than a clear, concise answer!
  6. Uncle Floyd isn't dead - just his career....................... lol Just Kidding!
  7. Welcome to the NJGF - if you need anything, just ask....................
  8. If you were to use Paypal as a form of payment to purchase a gun there are a few points to be aware of. 1) NEVER mention a gun, firearm, or anything related to them in the invoice / payment 2) Most FFL, sellers, ect. that do accept PP will require the payment to made as a "GIFT" or you pay the PP fees, because most will not eat the fee. PayPal monitors transaction for key words (like gun, ect.) so even if you pay discretely as a gift - if your payment is going to an e-mail address wit ha key word ( joeblow@ AceGuns.com) you're gonna get caught and they will freeze you account (money) and possibly terminate you account altogether. Be careful.......................
  9. speaking in generalities, in a particular caliber a revolver will have a bit more kick than a semi-auto, but you don't have to rack the slide on a revolver. A relatively easy caliber in a SA would be .380 (9mm short) recoil is just a tad over .22LR and be a good starting point to experiment with.......... Also - a Hg with a relatively small grip - like a Walther PK380
  10. The REAL question should be..... WHY? I guess it's for the guy who has this and needs a long gun to match.................
  11. They said they were planning on offering a 16" barrel so it won't be an NFA weapon but under current configuration - it's a No No.
  12. The mag limit has nothing to do with the gun! the restriction is on the mag itself - so as long as each mag is withing the current limit (currently 15 rds - could go to 10) the mags aren't an issue.
  13. I had a Slid Fire on one of my AR's and it was a blast to shoot. That being said - Legally according to NJ State statute, an evil feature is a Folding or Telescoping stock. The Slid Fire IS a telescoping stock, and therefore would be considered illegal and classify your rifle as an assault weapon in NJ. Again, like so many other Nj laws - it's up to you to decide how close to the line you want to come, but when you get as much attention as a Slid Fire gets when used in public, don't be surprised if you wind up in cuffs............... JMO JT
  14. NJ doesn't recognize an 03 (C&R) so as Tony mentioned - you would need to do a NICS check. (Class 1 FFL lic doesn't require a NICS)
  15. There are a few factors that play into the answer. I agree with Bob, and would install the TP by screwing it all the way down till it sits flush with the crown. Now, once that is done, is there any space between the end on the cap and the shoulder on the barrel? Hopefully not, because there would be no need to install a crush washer other than if there were space that needed to be taken up. If you guy is an "expert welder" I wouldn't pin the cap, because they are so thin that the pin really doesn't help anything - I would drill a hole in the TP and into the barrel and lay in a tack weld. .........
  16. Shouldn't you be asking that of the person doing the job?
  17. And you're on someone mailing list for receiving the 80% lower.
  18. Well the gas block must be installed before the MB is pinned. The rail depends upon which rail, and how it is installed? If you using a free float, and it fits over the gas Block, than there should be no issue. If your using a set up that won't slip over the GB, then there are gonna be issues. As H E asked you - Whatcha got?
  19. Unless you have one of the new "NY" style featureless AR's than i will assume your AR has a pistol grip. Since a pistol grip is 1 "Evil feature" you cannot legally add another "evil feature" such as a folding or telescopic stock.
  20. You need to be extremely careful / leary of cutting a chrome lined barrel. As soon as you cut into the chrome, it will flake (chip) and will most definitely affect the bullet trajectory..............
  21. is it chrome lined?
  22. I agree with Bob.....................

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.