bhunted

US Carb are the folks I'm considering. If there are no major needs for the gas line, I have a shorter run not far from the gen. I should have said, I only care about the furnace, fridge and a tv or some other things I may have forgotten. I have no doubt it would be ran at 50% load or less. I already ran multiple gen cables into basement from outside under the house. All I have to do is wheel it from the shelter, split up the loads and plug the main into the extensions. I just don't want to have to rely on gas nor do I like having all that gas laying around. At lease with the converter I have 3 options. Sent from my iPad using Tapatalk Pro

This is the unit I have: http://gens.generac.com/generaccorporate/media/library/content/all-products/portable-recreational-power/rs series/0k8513-rs7000e-spec-sheet.pdf

Did you change your gas lines?

Sounds about right. So is those numbers feasible to run it to the gen using those sizes. Incidently, I found this chart from US Carb. https://www.motorsnorkel.com/installation-pipe-sizing?___SID=U

Sounds like a project. I currently have a Generac RS7000E. Originally, when was considering a whole house gen. They recommended an 8.5-10kw if I wanted whole house covered. That was actually with gen, a $10k bill that I didn't have at the time. I currently have 30 gals of gas treated and stowed away for it. I dread those red bottle gas lines we've seen in the past. So either NG or many propane tanks. My house is old. If you are talking the main from the street, forget it. If only inside, they are all accessible from the basement. We only have a gas water heater, furnace, dryer and a stove. Sent from my iPhone using Tapatalk Pro

Thanks JB.... I was told that pseg has to come down and check pressures and stuff. I don't doubt I can [emoji106]do it. Just don't want to mess code etc. Checking to into US Trifuel adapters. Enables gas, propane and ng. Any intell appreciated.[emoji16] Sent from my iPhone using Tapatalk Pro

Currently looking to get a ball park estimate with possible contract to install a Gas Line out to my generator. Northern NJ location. Gas meter recently updated by PSEG due to being outdated. Gen is about 40ft from meter but there is a gas line feeding a dryer closer if that helps. Meter and lines are in basement. Would be nice if it can be use it to feed my grill when not feeding gen... If not, no biggy. Anyone interested either drop info here or pm me. Thanks in advance. Sent from my iPad using Tapatalk Pro

Ren Wax Sent from my iPad using Tapatalk Pro

Oh stfu ya whiner. If you knew, your first post rather than say, blah blah, what no one knows about, should have said so from the get go. But your short, usually confusing replies disqualifies you. Neener neener. PS: There are 2 copper fittings on the small ones. A real goldberg. [emoji23] Sent from my iPhone using Tapatalk Pro

Hey, ya gonna give credit to folks, give it to the correct folks. No second place trophies. ....and may sounds like a visit from the feds too look at what you tied together, may be an order. Careful what you play with in your basement. [emoji23][emoji37] Sent from my iPad using Tapatalk Pro

What the Frack! I said it was electrical before anyone. (Message 8) Geezus! [emoji36][emoji6][emoji3] Sent from my iPhone using Tapatalk Pro

Can't remember the release date. I want to say 2011ish. Giving it six years or so, you still have nine or so to go. They go for ever $600 or so. I've had Trij that last longer than 13-15 years. I guess for $250 or so may not be too bad. Maybe get him down to 200 unless Trij says its old. Sent from my iPad using Tapatalk Pro

Call Sam and Dean Winchester. You just released the Darkness. Maybe Castiel can help too.

Possibly get the serial number and give Trij a call to find manufacture date. Sent from my iPad using Tapatalk Pro

You have underground service and box outside? See if the other ends appear there. Sent from my iPad using Tapatalk Pro

The 2 small have copper fittings. I dunno. One don't look big enough for a drain. If water, I'd think all pvc. )scratching head and getting splinters under my nails( Still thinking for electrical services. Low and high voltage. Sent from my iPhone using Tapatalk

I think they are electrical conduits for underground service. Lot of contractors may put extras in for cable service, etc. Not to worry. Its a good thing. Take a cap off and look fown. Sent from my iPhone using Tapatalk

I'll take all of those things in the picture as a package deal. [emoji6] Sent from my iPhone using Tapatalk

Hey John! Pix or it didn't happen. [emoji51] Yea, yea. Well here ya go. Just came via UPS.[emoji16] Sent from my iPhone using Tapatalk

Pictures! ??? Where ya get it? Sent from my iPhone using Tapatalk

I chatted via email with the Strelok guy. IMHO, not the best programmer. Cartoonish, etc. I asked him a simple question. When he adds scopes, could he sort them in alphabetical order so you can browse them easier. Also, the Brand of scope before the other info. He said, why? Just search. Now I'm not a programmer, at least not for decades. But I'm sure most of the info in that ap is called up within a database of sort. Seems just like laziness. Every other app can be browsed except his. I'll reiterate. Ballistic AE or MD Ballistics. MD is nice but the author does not keep up with it. AE, the author is always on the ball.

I use Ballistic AE... very good app for that... also MD Ballistics. Also very good. I have all of them. I have Strelok but it gives me a headache. Dunno how that app has such a following. Ugly and difficult to navigate if you don't use it a lot.

I believe their sights are at 100. Unlike a lot of complaints, mine out of the box was spot on at 100. So, did my optics the same way. Sent from my iPhone using Tapatalk

Yup and Trump had huuuuge support backing and funding from the NRA. He better get it done. The NRA needs to squeeze some balls tighter.

Not to worry. As long as he keeps poking the bear, I'll keep kicking the donkey. [emoji6] Sent from my iPad using Tapatalk Pro