Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

twong11219

Members
  • Joined

  • Last visited

Everything posted by twong11219

  1. Seems like no one chimed in on this. I'd recommend doing a thorough cleaning. Upper, bolt and lower action including the bolt catch. Based on what you're using, carbon build-up can get pretty bad with 22s. Considering that you jiggled the upper and lower, then everything worked fine, I'd say there is something causing the bolt to stick. The first things I would look at is the bolt catch and hammer. Those are the 2 parts within the lower that contact the bolt. I think the Chiappa has the bolt lock function but not exactly sure. If you depress the bolt release, and the bolt is still back, then possibly the hammer spring is too heavy for the 22 bolt assembly. Disassemble the upper from the lower and try to cycle the bolt to see if it slides smoothly. If so, then maybe the hammer face needs a bit of lube, recoil spring might be weak or hammer spring too heavy. Maybe polish the contact points of the bolt to the hammer to help smooth out any tooling marks. Check the mag if there is one in particular that is causing this issue as well. Good luck.
  2. Thanks for the update. I was always curious to the effects of the blast. I've seen so many pictures where they mount the light so far forward. Maybe they do it just for photo shoots. I figured since I get carbon build-up on the pads of my bipod, the light would receive the same effect if mounted in the same position. I have a cap on mine that I leave closed when not in use. Just some added protection.
  3. Midway allows back-ordering for an A1 DPMS upper that looks to be available 3/13 but it does come with a case deflector. DPMS should be pretty good. For plinking, a 20" 5.56 pencil barrel should suffice for your intended use. You probably want one with a slow twist, about 1:9 to 1:12, if you intend to use 22s. The 22s don't like fast twists. Buffer assemblies are pretty standard everywhere.
  4. Say it ain't so. Dropped to the second page? Don't tell me I need to run out and get a 1911 to keep this going.
  5. That way cool. Is there any issues of muzzle blast with the light mounted that far forward?
  6. How close to authenticity do you want to build it? If it's looks you want, then either A1 upper receiver will match the retro styling to match the triangle handguard. The non forward assist was the first generation M16. The second gen had the forward assist with the designation M16A1. I prefer the forward assist because I actually use it. My recommendation is build an A2 National Match with A2 handguard. You'll have a better rear sight than what the A1 offers. You can build your way to a national match if you like. This is based on fixed handle approach. Going flat top with a removable carry handle will open you up to optics in the future. This is the M16A4. Not to say you can't mount optics on a fixed handle but you get better ergonomics and mounting options with the flat top. Optics don't have to be mounted so high above the bore. I assume you want to go with a 20" barrel. Do you want a plinker or match accuracy? The barrel should not be something to skimp on. A 20" Bravo stainless bull barrel with a 2.23 Wylde chamber will be the ticket. A good trigger group is also something to look for. Be careful of the triangle front sight. Some come drilled with set screws, some with holes only, and some with no holes. If you don't plan to drill, ream and pin the front sight to the barrel, stick to the set screw version. White Oak shoult have them. Any LPK you can get your hands on for a fair price will be fine. Some may need a little fitting, most do not. A2 stock and rifle length buffer kit should wrap up the look. I left out additional parts, but you should keep an eye on what I did mention. Could turn from a fun build to a headache really fast. Good luck finding BCGs too. They are hard to come by these days.
  7. Completely normal. The magnifier will focus on a smaller angle of view and will enlarge it. At basement distances, the rds alone has zero magnification, so you can leve both eyes open. The magnifier is meant for farther distance targets.
  8. Glad to hear the successor's schooling the old guy. I notice these builds tend to get finicky. Sometimes, you slap them together and all's well? Other times, it's just one diagnostics after another. Maybe the bolt release is sticky because it's new? I noticed that with mine. With each round sent, everything just seemed to break in and smooth out.
  9. Benchmade's great. I've owned a bunch and played with a bunch more. Their quality in build is excellent. You may get the occasional blade not being aligned in the handle, but it can easily be realigned. Lifetime warranty. It'll likely last longer than you.
  10. You snooze, you loose. I snoozed. Can't complain with a $9 Kershaw. That was a great deal.
  11. I was with VTEC testing out the Taccom. It looks like the chamber lip was protruding a bit far from the feed ramp and scraping the rim of the bullet going into the chamber. The brass rim was also catching on the breech face so the round would be canted into the chamber at ~30degrees. The bullet was already stripped and clear from the mag lip as you can drop the mag and the bullet would still remain in it's canted position. Upon close review of the jammed rounds, you can see lead shavings from the sharp chamber edge and an impression on the side of the bullet from the chamber lip. So from my review and understanding of 1911s (if I can apply this same principle to the Taccom), it looks like the chamber needs to be throated a bit and polished to reduce the entry angle of the round and the bullet won't catch on the chamber lip causing deformation. Then the breech face would also need to be polished so the brass can slide more smoothly up the breech face. Am I on the right track? Good point on the FCG. There was a note I just remembered somewhere about the poly FCGs needing to be upgraded or modified for 9s and 22s. The trigger reset was horrible, and the hammer was quite heavy. Nothing slid smoothly. Seemed like the tolerances were too tight for all the components.
  12. Not sure from your description. Are you having FTFs and slide lock issues or slide lock issues causing FTFs? I assume you're the one that sent all or most of the lead down range and have not been experimenting on a new grip or hold. How detailed do you clean your gun? There might be crud building up between the slide lock and frame or maybe a broken slide catch lever spring. Take off the slide and feed a mag in the frame empty, with 1rd and 2rd. See if the slide lock moves smoothly up when empty. With the 1 rd or 2rd, see if the bullet or follower is contacting the slide lock to be pushed up. If the slide lock doesn't spring back after removing the mag, then definitely look into detail stripping the frame insert and check the spring if it's too light or broken. If you're having slide lock issues, that's what I'd look for.
  13. If you put water on an oiled stone, it'll likely bead up. The oil tends to soak into the stone and is hard to reverse. You probably don't have to worry about it. Just make sure it dries out when you put it away so mold won't build up. I had mold issue before when I stored it in the cardboard box it came in. Again, I didn't dry it completely before putting it away. As long as the stone is sharp and keeps cutting, it's good to go.
  14. Damn Ray. What's with you and bayos? That's one way to manage recoil. Jab and bang. Zero muzzle rise.
  15. Does it speed dial 911 and GPS track you when you pull the trigger? If yes, then no. And if no, then still NO!
  16. What type or brand of stone is this? Do you wet your stone with water or oil? I use Japanese synthetic whetstones with water and have noticed this before on mine. The only time it occurred for me was when I didn't let the stone dry completely before storing away. I tend to soak my stones for several minutes before use so it gets pretty saturated. I removed the crystals by reconditioning the stone with my diamond stone. Afterwards, I let my stones dry overnight before putting them away. Never happened again. Likely it's some mineral being dissolved from the stone and seeping out.
  17. Depending how bad, you can try using some Flitz to remove the rust. Follow up with some heat with a butane torch and some cold blue to touch up any discoloration.
  18. I'm not sure what's the deal with them. I placed an order on the 19th for a LPK and a muzzle brake. On the 31st, sent a message through their website to cancel the brake from the order. Got an updated order status on the website the next day to note cancellation on the brake. The update definitely wasn't automated. So it seems like there are ppl alive there. No confirm of order or follow-up email of part cancellation. I have a feeling they left the channels opened to place orders but don't really have them in-stock. I was wondering that when I placed my order. There was not mention of availability or "in-stock", just that I can put it in my cart and place an order.
  19. twong11219 replied to Bbott's topic in Handguns
    Tried them both. Like PPQ more so that's where my votes going. I'm use to the button mag release so makes no difference if Walther changes it. The trigger is what made my decision. I like the pull and reset more on the PPQ. The LEM is nice but just not my taste.
  20. That's some BLING!
  21. I haven't been shopping a while for a 1911, but do WCs cost that much now? I thought 3g's where bad back in the days.
  22. Not to mention your PTP will expire way before your build hits the bench with these top tier gunsmiths.
  23. That looks sick. Can't wait to take that out for a test drive.
  24. Sorry, not trying to bash Wilson. Rolex is still nice in my opinion. I was looking for a Super Grade back in the days when I was shopping for my second 1911.
  25. My choice is this. When my head was buried in the magazines, I thought Wilson, like Rolex, was one of the best. Then I realized there were so many choices that were better. http://ctbrian.com/Chopper.html

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.