Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

twong11219

Members
  • Joined

  • Last visited

Everything posted by twong11219

  1. Hmmmm, so building out off a Black-Friday special may not be a good idea then. Sadly, I'm on a budget so saving all my pennies for the in-house custom will be far down the line. Building my way up to it will likely be my route as probably the intent from the OP as well. Finish wise, I'm not worried about. It's the fit and quality that I'm concerned about. If I do take the route of building up to the custom level, would it be better to find the cheapest 700 knowing eventually nothing will be left after the build is complete or get the mid-range 700 as the starting base.
  2. With all this talk of the 700s being a good platform for modifying, how many of you buy them only for the receiver and dump the barrel they came with for a higher quality barrel. Ie., a match stainless bull barrel? I've been considering a 700 myself for the baseline to a custom build. Based on all the available modifications and parts out there, and if you are so lucky to have no limit to budget, seems like the only remaining parts left from the original is the received and bolt. I don't want a shoulder relocator and just want a good caliber for precision long-range use. My personal favorite is the M24A1 with the H-S Precision stock. Simple. Probably considering 308 as well.
  3. Hey Ray. Is the cylinder in question blued or stainless? I've seen stainless cylinders finished where the back 1/2" is polished while the rest of the cylinder is brushed finish. Another way is polish a ring around the cylinder where the notches are. Not sure if you fancy that. Can you polish out the catch so it doesn't mar your finish as much when in contact?
  4. I think ultimately it depends on what your primary intent of use is. My decision was based on something that I can use all-around. I didn't want 2 separate setups and having the need to switch between what I wanted to use. Whether it be quick targeting or slow long-range bench accuracy, I wanted a one-for-all. I opted for the 1-4x Burris XTR. The pricing costs a bit more than an Aimpoint and magnifier. Set at 1x it does take a little getting use to compared to a RDS. You don't have the eye relief of a RDS with absolutely zero magnification at any distance from your eye. The scope has a slight distortion with both eyes open depending on how you focus it. Of course, if you stick a magnifier behind an RDS, you are going to run into the same eye relief issue you would have with a scope. The XTR reticle was what sold me on it. With the lumination turned up, it provides the large eye catching center reticle for quick acquisition similar to an EOTech. 2.25mil glowing outer circle. Perfect for transitioning between targets. The reticle is also very crisp and unobtrusive. Matched with good quality glass, I get a clean, uncluttered sight picture. Now if I want to tighten my groupings, I can turn to the center dot which is .25mil. I always felt the red dot covers too much of the target when trying to get the small groupings. Instead of centering the dot on the 10 ring, I have to center the dot inside the 8 or 9 ring to get my sight alignment. Another factor in choosing the XTR was the bullet drop compensation reticle. No need to guess how high to hold when you start going beyond 100yds. The only one gripe I have for the scope is the weight. That much tube and glass does weigh things down. Now can I say this is great for HD situations? No. The scope sits over my rear BUIS. If the battery takes a dump, I still have the cross hairs, but forget about using it in the dark. I don't have a quick release mount so gonna need a tool to take the scope off before I can use the irons. Since my setup is not primarily for HD, I'm not concerned. I have other gear to fulfill the HD requirements.
  5. Same here. Just letting the order marinate. Gonna keep it as back-up parts just in case. Got another LPK inbound so my build can still proceed, at a snail pace that is. Still waiting on my upper which I hope to have by early May.
  6. Same for me. Ordered for LPK on the 19th. No email and website still shows order pending. If they don't have any LPKs, they should say so. I think they are just keeping them for their own complete rifles to keep up with their orders. Sell a $66 LPK or $1,000+ rifle? Last I heard, they were still pushing out rifles.
  7. +1 to Bullzeye. Your collection alone can keep this post running for some time. You should restrict posting pics to one a month just to bump this post back to the top with new eye candy.
  8. That's nice mag1. Thanks for sharing. I've been wanting one of his Spanto customs for a while. Just don't want to cave into the grey mkt pricing to get one. My friend's got a Gen 1 before he became popular. Now that was a smart investment. Can you believe he was charging $385 for them back then? By the time I heard about him, he was in the Gen 3s already. He still making his stuff in 20CV?
  9. Keep in mind that double stacking a 45's gonna make that grip much bigger. Good to goto a shop and actually feel one out. If you got big hands, disregard what I said. Not a high-cap choice, but I'd get a 1911. You know eventually you'll get one. The G19's already your high-cap option for the moment.
  10. Lucky you mag1. Which Hindy did you get? XM-24 with Spanto? You must share some pics!
  11. Thanks for the info gski. Was there a break-in period for the poly FCG? I tried my friend's out and the pull was really hard before the break, then the trigger wouldn't reset without manually pushing it from behind. Seems like there maybe some flashing left from the casting that might be making everything all sticky. I know the tolerances are really tight, but I think it might be too much. We were running a 22 top on it so maybe the recoil was just too light for the break-in period. Was considering stripping it down and shaving off any casting lines to break it in faster. My only comparisons are RR, Geissele and KAC 2-stage FCGs. All high quality goods. Maybe comparing apples to oranges in this case.
  12. Has anyone actually used the NFA poly LPK on their lowers? So far the concensus was junk'em for a metal LPK. I tried it out and will confirm that it's quite crappy. Wondering if a longer term use will butter them up.
  13. Anyone there now that can give me a low down on the selection? Mainly looking for an RJ Martin. Thinking of going there later today.
  14. Sorry to hear that. To add HK mags have been hard to get. My friend's still on the hunt for P30 mags. I'd say be happy that you got 10rdrs instead of 13 as they are even harder to get and more expensive. Sux that you were anticipating for the full capacity to come home to this, but I think you got the better end of the deal. Be happy that it came with mags too. My friend in PRNY said people were picking up handguns without any mags. If it was me, the chance to have a new toy in my hand far exceeds the 3rds I'm missing in the mag.
  15. I haven't been to the JC shows yet. Only went to the NYC shows when they were still held there. How do they compare? I remember NYC shows were usually cramped.
  16. I always thought it was me when I said the 45 shot slower and felt more pleasant. Glad I'm not the only one.
  17. MUST RESIST THE TEMPTATION! maybe i'll take a peek on saturday. I hate how everything's become a lotto now. Hinderer's booth is always crazy. Got dealers holding 7-10 tickets while you stand there with your measily one. I was at a lotto one time and a dealer was drawn. He flipped it immediately after he took it. Come on! Dealers should not be allowed to participate in a show raffle. Dealers already got first dibs even before the doors open. Personally, I've been itch'in for a RJ Martin or Todd Begg. A Dave Mosier or Greg Lightfoot would be nice too. MUST RESIST!!! Thanks for the heads up though. Almost forgot.
  18. Not to brand bash here, but there are plenty of brands out there with different designs and doohickeys. Would Benchmade come to mind as the first brand off the top of my head for knives, no. I think it really depends what you're looking for. Sibert gave birth to the Benchmade MPR MyCQC7 was an offspring from Emerson. Benchmade's got soul. Just not in all of them. LOL!
  19. For a dedicated 22, I'd recommend a Ruger Mark 2 or 3. It's reliable and will last all the way to your grand kids. They do make a holster for it. If you're looking for something he'll eventually grow into, a Gen 4 Glock 22 is a good pick. You can change up the grip, and holsters readily available. Get a conversion kit to make it a 22lr. He'll get use to the motor skills and can eventually move up to the big bore. Snag a 9mm barrel and mags, and you'll have the versatility of 3 calibers in one. Not bad for 1 PTP. Good platform for IDPA and USPSA.
  20. Google SARCO in PA. Big mil-surplus store. If you're close, you can take a drive there and take a look. You can just pull these off the rack to inspect. I think you can do a PA NICS check and COE for purchase. No FFL transfer or shipping required. Give them a buzz. They'll walk you through it.
  21. Wow. Didn't know they had that stuff. Pretty good price too if they actually follow through. My back-order of 9mm's got rescheduled to a month later on availability. Was suppose to be available early Feb. I don't mind waiting in line. I'll check it out. Thanks.
  22. Just wondering if anyone's seen any Lake City 5.56s around or for pre-order that I don't have to give my left kidney for. Thx.
  23. Not sure of the origin or models but was looking at a bunch at SARCO on Monday. I may have been looking at M91s going for $199. Didn't have a bayo, but on the other side of the rack, there were bayo'ed carbine models.
  24. I think ultimately the combination of what you feed it will provide you the reliability you desire. In a SHTF situation, you're not going to be mixing ammo brands. Ie. loading one mag with one brand and another with a different brand. So the quality ammo that works will be most reliable. I understand the perception that a hg that can eat anything is the most reliable, but you're not going to be in a stand-off that you're going to be using a high round count. At least, I hope not. I concur that hotter SD rounds minimize FTFs, ejections, etc as everything just cycles harder. On that note, my 92 eats everything. Only one time it FTF'ed was because of an out-of-spec round in a box. The shell was oddly flaired wider than normal. I don't blame the equipment for this incident. Mic and chamber check each round if your life depended on it.
  25. It's nice that you can still customize them and still look like nothing much was done. I like sleepers. Plain Janes that can make clover leaves at 25yds is SWEET. I've never shot 1911s in any caliber other than 45s and 38Supers. I love my 45s but how do the other cals compare? Maybe we need to set up a 1911 meet. Oooooeeeee, that's gonna be an expensive one... for ppl that don't reload....

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.