Everything posted by Sig226GuyNJ
-
Meanwhile in New Hampshire...
Mine took about 3 weeks. No contacting of my references.
-
tympanostomy tubes? my 14Mo old needs em, lookin for experiences
My son had tubes when he was 10 months. It's a VERY simple procedure. His took literally less than 15 minutes. He went from making no sounds, to babbling within days. Ear infections went away. His fell out on their own about a year ago, and he has had two minor ear infections since, but nothing warranting tubes again. Your kid will be fine, and this will be very good for him. Best of luck!
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
Upload it to youtube, then post the link here.
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
Are you mechanically inclined at all? Brakes are simple to do, granted you're not making stupid obvious mistakes like I did the last time I did mine. Record the noise it's making and post it up.
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
All of you guys saying it was brake related were right. So when I installed the brakes a few weeks ago, I didn't line up the "pins" on the wheel hub properly. How did it go on at all you ask? The last mechanic apparently cut them off instead of punching it out with an impact driver. But they didn't cut one of them flush to the wheel hub but enough that I was able to get the rotor on. So the rotor was on but not flush with the wheel hub which is why it acted as if the rotor was warped. Good news is it was an easy fix and nothing is wrong with the brakes, shocks, or anything else. Thanks to everyone for your advice. Sent from my Pixel XL using Tapatalk
-
Wagoner County in OK - Shooting
A grandfather of one if the deceased is crying that it wasn't a fair fight because an ar-15 was used. Get the fuck outta here with that liberal bullshit. Sent from my Pixel XL using Tapatalk
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
Yes. Cleaned and pads and rotors. Rear caliper has a single piston. I'm pretty sure the rotors are not warped. I've driven with warped rotors before. I do not feel anything in the brake pedal at all when I brake. I just hear that damn noise. But the more I read what you guys are writing, I'm thinking it is brakes related. Hopefully, I'll be able to isolate the problem easily.
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
Yes, I used lube where there should be lube. What do you mean by caliper hanging? As in I didn't tighten it down enough? Haven't had any panic stops since I've replaced them. I'm hoping you guys are right about it having something to do with the brakes. It's very possible I screwed up somewhere and didn't realize it.
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
No it doesn't. Where I'm driving straight or turning, the sound is there when I apply the brakes. If I apply them very lightly, I don't hear it. But if I put enough pressure on brakes to actually stop, I hear it.
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
Yes. I'm planning on doing this Sunday. I put brand new rotors and pads on, and have done brake jobs before with no issues. I can't see how this is brakes related, but I do agree that everything I'm posting makes it sound like wheel hub/brakes related. If there was rubbing of the rotor, wouldn't you think I'd hear it all the time? TBH, I'm hoping it's brakes related as it would/should be an easy fix.
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
No noise before brake job, and no noise immediately after it. I don't think it's brakes related.
-
Any Mechanics On Here? Do I have a bad Sway Bar End Link?
I replaced the brakes on my car a few weeks ago, and all was well until I started hearing this noise about a week ago. It's coming from the rear passenger side of the car. It only happens when I apply the brakes. Any idea what this could be? I'm thinking it's related to my sway bar, but would love to hear your opinions. https://www.youtube.com/watch?v=w4lYANy3DWk&feature=youtu.be
-
Help. What is this?
And that is precisely why I decided to buy Apex drop in parts, instead of polishing or removing materials. Not that there's anything wrong with it, but I wasn't comfortable with my skill set to do something like that.
-
Help. What is this?
I'm using the standard sear on 1.0. The only difference is that the 40, which I took the apex sear out of, has an apex striker block as well. The 9, which now has the apex sear I took out of the 40, has the factory striker block. Thanks for the confirmation that I should be good!
-
Help. What is this?
Vlad. Your thoughts please. I took a Apex sear that I had in my 40 Pro, and put it in my 9 Pro. I shouldn't have any issues with this, correct?
- Concealed Carry Reciprocity Act of 2017 Hudson, NC
-
Questions on M&P 9
What are you trying to accomplish?
-
CTD Ammo Blowout - Free shipping
Where in the world are you finding Wolf Gold for under 30 cents a round?
- Concealed Carry Reciprocity Act of 2017 Hudson, NC
-
March 12th - CJRPC USPSA Match
The price increase is ridiculous. I'm thinking of not even renewing my membership as I hardly use the range as it is.
-
Dude
- Dude
I wonder what the delay is. What kind of production issues are they having? Anyway, thanks for the update Steve.- Dude
I've been anxiously waiting.- Baba Yaga (John Wick)
This is like going to a strip club and complaining that the food is bad.- M&P for IDPA
Both my 4.25 40 Pro and 5 inch 9 Pro came without manual safeties, and both have removeable plugs that fill the hole for a thumb safety. - Dude