Everything posted by mustang69
-
Any other HK P7 PSP owners out there?
I believe Heritage Guild Branchburg has a P7M8 in their case for sale. At least they did last week when I was in there...
-
What is the correct way to block a magazine?
I get that, but these look like something done in a home workshop. I can prove they were advertised as 10 rounders, but the spacer here seems like something that could have been done with a length of pex pipe. If this conforms to NJ guidelines, why couldn't anyone make a plastic spacer to adjust any mag over the limit? Does modding a mag require a manufacturers license?
-
What is the correct way to block a magazine?
The point was to understand what makes a legally blocked mag - Is it as simple as installing a spacer, or is there more to it? I have a hard time accepting the spacer installed in these is NJ-compliant. It's only luck that pulling the spacer out yields a still-compliant 15 rounder. I don't have any other aftermarket mags for my other handguns that are blocked. I'd be pissed if these, which were definitely advertised as 10-rounders, weren't legal in NJ when the seller said they were. It's only luck that the 15 they will hold without the spacer is still NJ-compliant. In the end I guess it's all just buyer-beware.
-
What is the correct way to block a magazine?
Not sure, haven't tried them yet. The springs seem a bit weak without the spacer though...
-
What is the correct way to block a magazine?
Attached is what the mag looked like as originally received once I took it apart. Baseplate - locking plate - spacer - another locking plate - spring - follower, all inside the metal magazine and holds 10 rounds. I removed one of the locking plates and the spacer, now it holds 15. Was as easy and quick as you'd expect. The spacer is just a piece of plastic tubing cut to length. I'm glad it only holds 15 rounds, I wouldn't want to defend that spacer in court.
-
What is the correct way to block a magazine?
Got them off ebay - yea, I know. But for the price, even if only 2 of them work it's still cheap. And I can change all four springs out and still be ahead.
-
What is the correct way to block a magazine?
Not labeled for round count but only have witness hole at 10 rounds.
-
What is the correct way to block a magazine?
Just curious, but what is the correct way to block a magazine to hold 15 or less rounds? I'm asking because I bought some handgun mags online that were advertised to hold 10 rounds. I got them in the mail today and, sure enough, they only hold 10 rounds. But, I pulled the base plate off one and the only thing that prevented loading more rounds was a plastic spacer between the baseplate and the spring. I reassembled the mag without the spacer and now have 15 rounders (verified). It works for me since I got 4 new Promag 15 round mags for a CZ75 for $32 including shipping. But, was that a NJ legal way to modify them in the first place? Seems too simple...
-
New Glock commercial
What are the odds we'd see that during the Superbowl? She can sit on the couch wearing a GoDaddy t-shirt eating some Doritos with a Budweiser commercial showing on the tv...
-
CZ P-07/P-09 or FNX/FNS
Of the 4 in the poll I own 2 - a CZ P07 9mm and a FNS in .40. My choice if I could only have one would be the P07 but it's close. Recognizing the CZ is hammer-fired and the FNS is striker-fired, here's my reasoning. Controls - The FNH I have does not have a manual safety (the way I prefer it, but you can also get it with a manual safety) and has ambi controls for both slide and mag release. The CZ has an ambi de-cocker (can be configured for a safey if you prefer) but the slide and mag release are right-hand only. (mag release can be switched but it still wouldn't be ambi). Advantage here goes to the FNS for the ambi controls but that may not matter to you if you're right-handed and it won't be your HD/SD gun. Frames - both are very similar. The grip on the CZ is long/thin while the FNS is short/wide. Both have interchangeable backstaps to help with fitment. The trigger guard opening on the FNH is rounded and larger so would work better with gloves, while the guard on the CZ has a flat front if you prefer a grip that uses it. Where the major difference is for me is in the grips. The FNS stipling is very aggressive, almost to the point of being uncomfortable over long periods at the range. Slides - The FNH slide is taller, where the CZ has the shorter height due to the slide within the frame design. If you have large hands you may find the CZ harder to manipulate the slide because there is less to grasp. Not an issue for me though. The CZ also has a larger ejection port despite being chambered for a smaller round. Not that I've noticed ejection problems with either. Triggers - The FNH has a shorter throw with a more pronounced reset, while the CZ has a smoother, lighter pull. It's a toss-up to whichever you prefer. Sights - Not a factor either way since they are easily changed, but the as-delivered CZ sights seem to fit the gun better. Sight radius is almost identical. When I weigh everything, my choice is the CZ because it is more comfortable in my hands. The FNH, while I enjoy shooting it, just hurts my hands if I use it too long at the range because of the grip texture.
-
Cooling system leak ..........
Tru tightening all your hose clamps. With the cold weather setting in I've seen lots of small leaks fixed that way...
-
Looks like snow...
Guess it's time to break the snowblower out of the shed... Boy is it buried - will take me an hour just to reach it.
-
PPQ M2 vs Glock 19
I have both a Glock G19 Gen 4 and a PPQ M2. For my tastes the PPQ is much nicer - it fits better in my hand, has a great trigger and looks nice. The Glock just doesn't evoke any emotion. Both will perform will as range and HD weapons. If you're looking to customize I believe the aftermarket support for Glocks is only second to 1911's. I had the PPQ first and have never thought about selling it. The Glock I bought to see what the magfic was supposed to be all about. It doesn't do it for me but I won't sell it either - reputation for reliability and overall popularity makes it my preferred bug-out gun if SHTF.
-
Stihl chainsaw help
As others have mentioned, if the wood is burning then it's a chain problem, most likely dull. The picture shown the chain installed correctly so my bet is it needs sharpening. Looks like there is enough meat on it to sharpen. Depending on the bar length I may have a couple spares you can try - I usually have 5-6 spares at any time. You'd be surprised how many people take chains to the dealer for sharpening and never pick them up. I get them cheap...
-
Other peoples guns at the range
I usually offer to let the RSO's shoot whatever I brought if they show any interest. Once in a while a shooter next to me will start a conversation, then depending on how it goes I may offer. I usually get taken up on the offer when it's a .44mag. Everything else depends on what the gun is.
- Buying used car from private party
-
American Sniper movie trailer
Saw it last night. Thursday evening movie and the theater was packed. When it ended no-one in the seats moved or made a sound until the credits were done, then filed out quietly.
-
When Christie's Gone
I'm going to look a bit more on the positive (ok, neutral) side of things here. I believe much of what we saw with the proposals was meant to embarrass Christie and distinguish (D) from ® after the pension changes. Once Christie is gone it's likely to be a (D) in office and the legislature won't be looking for any "gotcha" legislation unless Bloomberg comes calling with buckets of campaign cash. Also, the NJSC seems to be avoiding any 2nd amendment cases since Heller/MacDonald. The USSC will need to eventually address the split in circuit court rulings, but, since Heller, it seems unlikely to restrict 2a further than NJ already is. Any further restrictions put in place by the NJ legislature risks something finally being taken up by the NJSC that will expose just how close to the edge NJ laws already are. If the legislature pushes much/any further they stand to lose the entire scheme in place today. Granted, it might take years to work it's way through the courts, but it could move pretty quickly if there is enough noise. I know, none of that helps with the current situation. Christie could have completely changed things up by declaring self defense as suitable justifiable need, but he hasn't. He's not a friend of the 2nd but he hasn't been an active enemy either. I don't see Sweeney being the next Governor - too much baggage with the pension changes and the need for whoever the next Gov is to do something about pensions. I think it's more likely we'll get someone like Norcross or Booker - not that I'm happy about either. A year (or two) is an eternity in politics but I don't see anyone even on the horizon on the ® side that I think can win state-wide election. Regardless, much like the presidency, anyone who wants the job is unfit to hold it.
-
1873 Winchester found in the desert
Interesting find... http://www.foxnews.com/us/2015/01/15/132-year-old-winchester-rifle-found-propped-under-desert-tree/
-
CCI Minimags - $8
Was at Heritage Guild in Easton this afternoon. CCI Minimags on the shelf, 5 box limit, about $8 per box for HP. Also had bricks of CCI Tactical for $26. Maybe not a great deal but at least it's becoming more available.
-
What was your least favorite gun purchase?
Mine is my Ruger SR45. It's not a bad gun, just never makes it out of the safe. Too big for carry and ff I want to shoot .45 I have better options - Sig 227, 1911's. Now if you want to talk about the ones I let get away...
-
What's going on at a heritage Guild?
I'm another regular at HG Branchburg. My experience with them has always been positive, and I've found everything I've bought from them to be competitive price-wise all things considered. Everything new has been priced close to other local dealers and some close to internet pricing. Some of the used handguns I've bought have been absolute bargains, and they'll hold something for me with nothing more than a handshake. THen again, if the price isn't right I won't buy it. Are they perfect? Nope. I wish they had more used inventory and had some of the trade-in deals seen on the internet. But they meet a need, and I've gotten to know the staff in the gun room - some nice folks. I've found that building a relationship with the employees of whatever vendor you choose to work with almost always improves service. Could I save a few bucks sometimes? Maybe, but not much once you consider all costs involved. And I put a value on being able to walk in (or call them) and have them put my next purchase on hold (because of OGAM or P2P wait times) without so much as a dime out of my pocket until I pick it up. I use the Easton range regularly because it's the closest for me and I find the PA store to be nice because they have more in stock, but used prices are higher out there and the transfer times to ship something to the NJ store is a bit long considering they are the same company. It also appears turnover of the PA staff is high as there is someone new every time I'm there. Not excusing the attitude seen by the OP, but experience tells me rules get put in place in reaction to something that happened before. Maybe they got burned somehow (though hard to see how). I've tried several other local vendors, both big and small, and haven't found one yet that is as easy to deal with than HG Branchburg. I've had vendors insist on me having a P2P before letting me handle a gun, other vendors refuse to take a gun out of the case unless I put a deposit on it, even one refuse to sell me HP ammunition since I'm not LEO. No sense getting all worked up about it, I just move on. I haven't found one yet that doesn't have quirks. But then again, I do too. All IMO...
-
H&K VP9 vs P229 vs P226 in 9mm
Of the three I have both the 229 and the VP9 - if I had to choose only one it would be the 229 for the reasons mentioned above. Another major benefit IMO is the ability to easily change calibers. One frame and you can shoot .22lr, 9mm, .40s&w and .357sig.
-
Are You Leaving NJ in the Next 5 Years?
My concern is it's not just conservatives leaving NJ. I see liberalism as a disease. Older liberals leaving NJ are just going to infect someplace else. My wife and I have spent our last several years vacationing across the country looking for areas we'd like to retire. One of them is Asheville NC. I swear I read that was a place the Obama's were considering once they trashed the country (I mean leave the Whitehouse). It just seems that liberals, when they want to leave behind the mess created by liberalism, gravitate to more conservative areas - then slowly destroy them by bringing their liberal beliefs with them...
-
I need to try someones VP9 asap
My impression is in this thread.. http://njgunforums.com/forum/index.php/topic/73749-vp9-range-impressions/