Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

WVisHome

Members
  • Joined

  • Last visited

Everything posted by WVisHome

  1. Wow, who pissed in your Cheerios? NJ is soooo much better, just look at what shining examples Camden and Newark are!
  2. Amen to that. I don't think LaPierre is doing us any favors.
  3. To be fair, I prefaced my post with a big *IF*....
  4. So, back to the topic.... *IF* the claim is true....that Obama is vetting military leaders on whether they'll "fire on US citizens" or not... ....what in the world can you imagine would prompt that?
  5. Point taken. Data is from the CDC National Vital Statistics Report (NVSR) “Deaths: Final Data for 2010.” The data can be found here: http://www.cdc.gov/n...010_release.pdf You're right, I used inaccurate data. The "Assault (homicide) by discharge of firearms" number is lower at 11,078. This gives a death rate per 100,000 of 3.6 people. (Both of these figures pulled directly from the PDF). That's 3.6 of every 100,000 people killed by any type of firearm according to the CDC. The data from the CDC doesn't break down the type of firearm. That data can be taken from the FBI. http://www.fbi.gov/a.../10shrtbl11.xls and here: http://www.fbi.gov/a.../10shrtbl08.xls (Now, here's the tricky part... the FBI and the CDC numbers don't match. The FBI lists 8,775 homicides by firearm) Per the FBI, In 2010, there were 8,775 homicides by firearm, of which only 358 were by any kind of "rifle". So, if we use the FBI data, assuming the 2010 US population to be 308,745,538 (as per the 2010 Census on Wikipedia) Total Homicides (all firearms): 8,775 Homicide Rate Per 100,000 (all firearms): 2.8 people Total Homicides (RIFLE only): 358 Homicide Rate Per 100,000 (RIFLE only): 0.11 people (Since 0.1 people doesn't make sense...) Homicide Rate Per 1,000,000 (RIFLE only): 1.1 people Also, according to this data in the following link, there were 232 "justifiable homicides by private citizen" in 2010, which should be taken off of the 8,775 number. http://www.fbi.gov/a.../10shrtbl15.xls The most interesting thing I just noticed....since 2006, firearm homicides have been steadily falling. In the mean time, justifiable homicide by firearm has been ticking up. All in all, my "inaccurate" numbers turned out to be close enough, but your point is well taken. It's MUCH harder to argue against something like this when you have the facts available for checking.
  6. Nick, 2 things.... Why "20 rounds"? and what will prevent FTF transfers from NOT getting a NICS check? Just so you know, I support some sort of "certification" or "qualification". I fully believe you should be required to prove you're capable of properly handling a firearm before you can buy one. Not totally against the National FID, but that's toeing the line with National registration.
  7. Remington needs to move the F out of NY.
  8. I got the same letter. Don't feel special.
  9. I posted this in another thread, but figured it may get lost in there. Apologies in advance if anyone feels a new thread wasn't necessary. These are the kinds of facts we need to bring to light. Here's some informational math for you.... I haven't recently verified these numbers are exact, but from my previous research, they appear to be correct. The data was taken from either the FBI or CDC, can't remember. All firearm deaths •Number of deaths: 31,672 •Deaths per 100,000 population: 10.3 Firearm suicides •Number of deaths: 19,392 •Deaths per 100,000 population: 6.3 That results in: All firearm homicides •Number of homicides: 12,235 •Homicides per 100,000 population: 4.0 4 people out of 100,000 are murdered with any kind of gun. (0.004%) That's a 99.996% chance of not being murdered by ANY gun. Now...of the 12,235 firearm homicides, only 323 were killed with any kind of rifle/long gun. That brings the numbers to: Only 1 person out of 1,000,000 (ONE IN A MILLION) is murdered with any kind of RIFLE. (0.000001%) You have a 99.9999% likelihood of never being murdered with any kind of rifle, let alone a scary "black rifle".
  10. Here's some informational math for you.... I haven't recently verified these numbers are exact, but from my previous research, they appear to be correct. The data was taken from either the FBI or CDC, can't remember. All firearm deaths •Number of deaths: 31,672 •Deaths per 100,000 population: 10.3 Firearm suicides •Number of deaths: 19,392 •Deaths per 100,000 population: 6.3 That results in: All firearm homicides •Number of homicides: 12,235 •Homicides per 100,000 population: 4.0 4 people out of 100,000 are murdered with any kind of gun. (0.004%) That's a 99.996% chance of not being murdered by ANY gun. Now...of the 12,235 firearm homicides, only 323 were killed with any kind of rifle/long gun. That brings the numbers to: Only 1 person out of 1,000,000 (yes, ONE IN A MILLION) is murdered with any kind of RIFLE. (0.00001%) You have a 99.9999% likelihood of never being murdered with any kind of rifle, let alone a scary "black rifle".
  11. What happened to the debt ceiling, the budget, the economy and the job market???
  12. Ruger Super Redhawk 44 mag Ruger Blackhawk 41 mag for fun... North American Arms 22LR/22mag Wasp http://northamericanarms.com/firearms/magnums/wasp/mc-tw.html
  13. raz, Thanks for the response. I hope you don't take my posts as argumentative, I'm simply trying to understand. I may have a fundamental flaw in my view of what I'm accomplishing. What do you mean by "creating a sloppy bedding situation where the the least variance in tolerances are the front lug or the tang so they get abused first."? Are you saying the pillar holes should be relatively snug on the pillars when the action (with the pillars bolted on) is placed in the stock against the recoil lug? Unfortunately, I've already purchased the Devcon and Stocky's pillars....I'd rather not spend the money for the Score-Hi kit. I had considered renting the drilling jig from Score-Hi, but their pillars are 5/8", and the Stocky's I bought are 9/16". The reason I went with the Devcon was the overwhelming internet chatter that it's one of the better bedding materials. Did I make a mistake? And I don't "hate" the B&C stock, I just prefer a thumbhole. I've considered "skim bedding" the aluminum block in my B&C, but I've also considered selling the B&C....I haven't decided yet. Also, what do you mean by this: "IF it is biggest liklihood wit the B&C is some rubbing up front which you can fix with judicious use of abrasives". Rubbing up front where? I know it's free floating, I can slip a business card all the way to the lug. And I'll bite....how does one mess up after a perfect pillar job? And to Parker: "Something isn't right here. If you have a composite stock and an aluminum bedding block, with a free-floated barrel, you should be getting better accuracy that 1.5"-2" Other than factory loads, you've tried no reloads tuned to the rifle?" No, I do not yet have any reloading gear, so I've only been able to use factory loads (on top of that, I'm limited to what factory loads I can even get locally). As I've said, it does seem to like the Core-Lokts....I've gotten sub-MOA groups out of it, but that's the only one. But even then, it will throw fliers. Say I shoot 6 rounds....it'll put 4 inside an inch, with the other two out to ~2". To be fair, it totally could be me. I'm relatively new to bench shooting, so I'm still learning good bench discipline. (consistent sight picture, breathing, squeezing, etc...) So far I've used: Remington Express 140 gr Core-Lokts Hornady 139 gr SST's Federal 150 gr (blue box) Federal 140 gr Fusion Federal 140 gr Premium (red box) I've got some Winchester Silver tips and a couple others that I don't remember on the way. Lastly, regarding the accuracy. I do in fact have the Mountain contour barrel (super thin). From my understanding, this thing can get a little "noodley" when it starts to heat up. I haven't seen any "stringing", but it does throw fliers. My brother had to full-length bed his to bring it it, and I've read a lot of people have had to use fore end pressure on these thin barrels. Like I said....I'm not trying to sound ungreatful for the replies. I'm just trying to state what I believe to be true, and am trying to understand where and why I'm wrong.
  14. For such a passionate group, we sure are a disorganized lot, aren't we? :girlwacko:
  15. Seriously.... I'm SOOOO effing sick of that retort. The people who say that don't like to be asked if they "need" their 200hp car, or if they "need" a smartphone. (I know you were being facetious Pizza Bob.)
  16. Excellent idea. I don't understand the urgency on getting police escorts for the victims sent to the hospital.
  17. Understood.... 2 things: - I understand the lug needs to be in contact with the stock. I plan to bed the pillars with the lug touching the stock. BUT....I'm going to bed the action as well, so it doesn't seem to matter if the initial pillar bed job has the lug touching, as I'm going to hog that out and fill it with epoxy anyway. The final result will be a wall of bedding behind the lug, regardless of where the pillars are set initially....am I thinking about this wrong? - Second, I'm planning to bolt the pillars to the action using the action screws, then slipping the assembly into the stock. As long as the pillars don't bind in a dry fit, there isn't any way for them to get angled, right?
  18. This guy should be the voice of the NRA instead of LaPierre.
  19. Hey folks, I'm getting ready to attempt to pillar/glass bed my 700 Mountain rifle. I have a question... Everywhere I see people talking about how "critical" it is to be sure to drill the holes in the stock for the pillars perfectly. Correct me if I'm wrong, but that doesn't quite jive with me. Isn't the idea of using pillars to eliminate any stress? If so, wouldn't drilling the pillar holes out "perfectly" mean a tight fit between the pillar and hole? It seems to me that you'd want the hole oversized slightly so that the pillar can find it's own stress-free resting spot in the epoxy filled hole. I'm planning on drilling my stock out using a drill press. I'm going to use a drill bit that fits snug in the holes, chuck that up to the drill, then use that to center/level the stock in the vise, then replace the drill bit and go straight back down. I'm planning to drill it in 2 steps (hole is 9/32", drill 3/8-7/16" then the 9/16"). The pillars are 9/16" and I figured if it's tight, I'll either "wallow" out the holes using a hand drill and the 9/16" bit, or use a chain saw file. I should be fine doing this, right? As long as the pillars aren't binding, and there's not a LOT of excess room, it should be good, shouldn't it? Also, I'm planning the 2 step method....bed the pillars first, then bed the action/bottom metal together afterward. Last thing.....my brother has an older 700 Mtn rifle...he said he full-length bedded his (barrel and all). He said it helped a lot to stabilize the thin contour barrel and improved his accuracy. Mine is currently sitting in a B&C Medalist stock with the aluminum bedding block, fully floated and isn't exactly a tack driver. (1.5-2" on a good day, sometimes <1" on a good day with Remington Core-Lokt Express ammo). I'll be bedding this in a Boyd's Featherweight thumbhole, and the forearm is completely hogged out, and there are 3 vent slots on either side. My temptation is to bed up to these slots, leave under the slots open, and bed the last 2-3" of the "close" portion of the forearm. Thoughts? This is my first attempt, so any suggestions is appreciated. I've been reading instructionals and how-to's for the last 2 months, so I'm confident it's relatively easy. My list: Remington 700 Mountain SS action Boyd's FT Thumbhole stock Devcon Plasti-Steel Putty Stocky's Stocks 9/16" flat-top pre-cut aluminum pillars Kiwi Neutral shoe polish release agent
  20. I stand by my belief that the movie Idiocracy was a documentary sent to us from the future.
  21. In. Met a Russian fellow at Central Jersey Saturday...he said he's a member here, and that he knew around 40 people that were going.
  22. From what I understand, you'd be better off looking for either a new SPS 700 (the new ADL version), or even find a used 700. Also, part of the $ you're paying is for a garbage scope...keep that in mind.
  23. Agreed. The only debate is to stay and fight, or leave before my 700 and it's 4 round internal mag is contraband.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.