Rick_F

I sent an email asking about getting the front strap checkered (+/- $200), and they told me I would have to pay the price for this service, plus the price to refinish it ($80), plus return shipping ($15). If I just get the defect fixed, the refinish cost and shipping is free. I tried to explain to her that if I get the defects covered, they will be FREE, so why would I be charged for these if I pay for the checkering? I questioned the lady, and she reiterated her previous stating "checkering is not a defect." She also said it will take 12 weeks, regardless of if I just get it fixed, or if I also get it checkered. I'm am NOT a happy camper so far.

Yeah- that's completely understandable in this climate. Thanks for the reassurance. Lesson learned with cars is that once it's repainted, it's never quite the same. Maybe while it's there, I may ask them to checker the front strap. If I do, I'll see if they can do it like my SIG P220 elite st. It's a lot more mellow compared to the checkering on the Kimber so it doesn't bother the fiance.

:::::::: Update :::::::: Today I received an email, FedEx return label, and a phone call from SA. I'm disappointed with the response time, but the call was courteous. I sent it out today, and hopefully I hear back quickly. Now, for my question. If they refinish, will this pistol be in any worse shape than brand new? Is there a limit to how many times you would refinish a pistol? Based on my automobile experience, I would not own a repainted car (unless it's a custom hotrod) as the finish is never as good as the original OEM. Should I be concerned with that here?

How long have u been waiting?

Thank you. I will err on the side of caution and save my permit until I get this resolved.

^ Thanks guys. I've been curious about that. I recently bought a Springfield Armory MC Operator that I'm having issues with http://njgunforums.com/forum/index.php?/topic/46864-springfield-armory-mc-operator-finish-wear/page__fromsearch__1 . I have 1 permit left, so I was wondering if I should save it in case SA gets off their lazy asses and lets me know what they are going to do.

What if you send a handgun back to the manufacturer, and they replace it with a new one . . . Do you need a new pistol permit/NICs to receive it?

Haha thanks. Btw, how long does it normally take to get a response from SA? Still haven't heard an answer to my email or voicemail. I waited on hold with customer service today for my entire lunch hour, and could not get through. This is pretty frustrating, as I do value my time.

Pretty much the same. turboback, intake, intercooler pipes, Accessport, gauges, etc.

Yeah I'm a little girl. I got the paddle shift lol. It's a white SE in case you see me at Bullethole. My problem lies in the fact that it's functionally flawed, and exhibits poor craftsmanship. I can see how it's misshapen. Craftsmanship is important to me. Scratches from use, etc doesn't bother me.

Actually I just did it. With or without the recoil spring, the slide touches when I actuate the slide. If it was stainless, I could fix it with a file in 30 seconds, but with both finishes screwed up, I'd rather SA make good on it. My fiancé did try to talk me into the USP .45. Last Brazilian gun I'll buy . . .

Noted- thank Wojo. I'll add some input tomorrow. Good night.

The SA, brand new, is about as loose as my SIG P220 after near 1k rounds thru it. It does show some signs of gouging on the frame rails though. FWIW, I was told SIGS are meant to run loose and it's fine (sent it for the action enhancement). Every 1911 guy I know that's handled it says my Kimber is tight as hell.

I've only been shooting for a year and a half, and I'm no expert by any means with 1911s. I removed the slide and replaced it. I don't think just doing that would be enough to improperly reassemble, but I may be wrong. I won't be offended if anything thinks this is a possibility. I didn't really clean or mess with anything yet, as I haven't had time to bring it to the range. I squirted a little M-Pro 7 at the recommended lube points however, and when my guns aren't in use, I keep them on the wet side.

It also appears that they did not mill it down enough in that spot. It's not quite as circular as it is on the other side. Also the rear where the frame and slide meet is totally unmatched. Funny how everyone bashes Kimber, yet mine has a MUCH better fitment than the SA. The frame is tighter even after 500+ rounds.

Exactly. It's completely worn through the finish on both the frame and slide (again before I even put 1 round thru it). Thank you.

Thanks Wojo. This gun is brand new and unfired. The slide is rubbing against the frame on the dust cover part from the approx. 50x I've racked the slide. It's worn completely thru the finish on both slide and frame.

Hi guys. I just purchased a Springfield MC Operator, and haven't even been to the range with it yet, but have been dry firing (with snap caps) quite a bit. Tonight I took a look and noticed some wear completely through the finish on the muzzle end, and also on the frame where it is making contact. Is this normal, and to be expected? For reference, my Kimber has no signs of wear in this area. It looks like the round cut in the frame isn't perfectly rounded on that side. Please look at the crappy iphone pics below. Thanks.

I have a PPS and I'm very impressed with how well I do with it because of it's small size. Good luck finding mags though.

HK P30L

I have a SIG P220 elite stainless & I love it. I don't really see the point of the P227 going double-stack for the 2 additional rounds. I'm 6'4 and have fairly large hands, and the P220 with the wood grips is just right. Any wider and my grip would suffer. I know the E2 grips are thinner though.

I have (actually fiance does) a 686+ pro series 5". I think it's amazing. The double action feels like swiss watch craftsmanship. IMHO the double action is vastly superior on S&W compared to Ruger and the like. I find it to be the perfect revolver for range fun, except I'd prefer it to have a contrast front sight.

Try using GOOF OFF. I color filled my LMT AR lower, and used this to wipe off the excess.

They had this same stuff at Ottomanellis for $11 or $12 a box the other day. I can't remember if they had a limit on the amount of boxes you could purchase though.

Thanks for all of the good advice. Ironically, it was fixed in the 2nd to last position. I unbolted it and moved it back 1 pre-tapped notch further back. As for the thumbscrew- I will take consensus opinion of avoiding that. The rifle does not have a muzzle brake on it, so I'm hoping that would keep someone from having the suspicion to investigate the little bolt on the stock. To be honest, I just drive to the range and back with it. I don't usually get pulled for anything, and am presentable and curteous when I am. I also have PBA cards from a good friend who is a retired ex-chief of police of a major NJ city, who is a professor that writes chapters in policing textbooks, use-of-force expert, FBI consultant, etc. I understand siding with caution, but is this something I should really worry about?