Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

SuRrEaLNJ

Members
  • Joined

  • Last visited

Everything posted by SuRrEaLNJ

  1. I'm thinking that it's furtuneate for me that I don't have the internal bulge. The dr is convinced I have a hernia but it's not through to the outer wall. I forget the word he used for that. Surgery is on Friday the 23rd, and I'm cleared to be off for at least a week, and pulled from shipments and things involving real work for an indefinite amount of time. Yesterday all my boss would do is let me stand there and look pretty, I got yelled at for picking up anything heavier then the phone so I'm not to worried about being forced back.
  2. My primary and what I have carried when in free America is an xdm, so the XD's would be the natural transition and would fit my programmed muscle memory naturally.
  3. Got the call today I'm going under the knife two weeks from now to find out how bad the damage is. They have to go inwith the camera to figure out how hurt I am and then repair acordingly. The doc can't give me an estimated recovery time without knowing what exactly he's fixing, but I have a probable issue in my right groin and a possible issue in my right abdomen. Anyone else have hernias operate on? How long were you laid up for if so? I'm kind of not sure what to expect here.
  4. Reloading for x39 would only make sence if you were not shooting commie ammo, ie to have some indoor rounds for ranges that ban bimetallic russian ammo
  5. Lessons from someone who closed on their first in october... And still isn't in the damn thing yet Whatever you think it'll cost times it by 3 Anything fixed will reveal two other problems Anything the previous owners diy'd probably is a good tug from coming apart ( just had a light fixture come out of mu bedroom ceiling) A lot of people will ofer to help, they all have some agenda, especially the Inlaws Do it right the first time or else you'll do it again tomorrow No matter how small that issue was said to be/ appeared to be your foot could wind up through the floor in your kitchen before you have time to say "it dosnt look to bad" Don't ever underestimate the value of watching "this old house" on YouTube Everyone on hgtv has a billion dollar budget or is full of shit. This is especially true when in laws watch hgtv Don't be ashamed to contemplate how many guns/ammo/bikes/trucks/other cool shit you can buy with whatever the last house bill cost you. That 5% off for a store card really does add up, but be sure to pay the frickin thing Hope the house dosnt wind up as bad when you get old as it did for the last guy that lived there, realize it probably will then hope your dead before you notice
  6. Monroe makes quick struts. Allot of companies have quick strut like assemblies. Saves you needed a spring compressor or worrying about caps or bearing plates Mark everything you take out, whiteout is good for this, tie rods struts, etc,your best chance at not being way off on alignment. Maximas might have a non eccentric camber alignment with the lower knuckle hole elongated for adjustment, but it's been some time since I had one apart. As far as brand when I was at the independent shop it was napa for domestic, world PAC supplied (Bosch denso, etc) for imports. In most cases look at the warranty, the longer the warranty on a part the less likely you will need it
  7. Never mind, I fixed it. Somehow the ejector hoped past it's spot on the sear spring. If I had to take a guess last time I cleaned it for her I pushed it down too far and didn't notice. Shhh, don't tell her
  8. So I went shooting with the wife today and broke her colt government 380. Somehow the extractor was not quite where it should be and when I ran the mag in it got stuck against it. Managed to get the recoil spring and slidestop lever out move the slide and push the stuck mag out with a brass rod. The extractor had/had no spring tension holding it up. I haven't gotten the gun apart yet, just got home. Never dug that far into this or any other 1911 style for that matter. Any ideas or advice?
  9. Ordered and paid for one tonight, should be in next week. =) stupid change of address isn't back from dmv yet, which is holding up my permits. I paid cash, which was cool just to say I did
  10. Thank you. Trying to minimize potential for dumb questions with the new pd
  11. Question, does the dmv issued change of adress label count, or do u need to have a new dl issued in order to do an address change for fpid?
  12. so i finally got to shoot a cz75 today. I didn't shoot it well at all. The grip felt chunky in my hand and i just couldn't get comfortable with it. Im glad i gave it a go, but my impression was "ok" i wasnt shooting bad either today, heres 22 rounds, and even though i had a few flyers it was pretty consistant so looks like theres a BEagle in my future. I had cash in hand (working on permits) but the one i fondled recently was gone.
  13. Ridgefield Park, Bergen County New Milford, Bergen
  14. Should be voiced by Nolan North.
  15. I put my last one down at work. I'm afraid someone may have wanted it more then I did as I haven't been able to find it in the back room for a week, so here's my new edc
  16. Mag blocks has a 15/20 limiter http://www.magazineblocks.com/magento/products/magblock-kits/ruger-mini-14/mini-14-mcl-10-20-block-ruger.html
  17. a grill style cover does meet the criteria of having them covered when on road
  18. Not to thread jack here but I've heard things about like tfo sights and puking the fiber tubes. Do the Dawson's not have this issue?
  19. Rent a Jeep amd blow a day on the road to hanah
  20. Howard, i beleive rtsp has one in their rental inventory. I really apreciate the offer but my schedule has gone to shot lately so im not sure when id be able to keet up with you, however if i take to it i might have to talk you out of one of yours. Sof, i apreciate the offer as well, but i dont think im making easton in the near future
  21. I'm going to give the cz a whirl next time I'm at rtsp. I actually tried to shoot one today, but the place I was at didn't have one.
  22. So I had the chance to stop into another 5 star rated range today in TN. Place was nice but half the ports, hour wait, crap parking. I didn't shoot, was just killing sometime after breakfast. The one or 2 people that asked me if I was looking for anything in particular were nice enough, but I didn't have a real experience to judge by. This was supposed to be the best range in the area, and I didn't walk out going wow, I wish I was closer to here, other than the fact that I like this area of TN. Not to sound like a fan boy but it kind of made me appreciate my membership back home.
  23. Gunsafereviewsguy was actually what led to some of my confusion, as much of what I see seems to be inferior quality. I have read his stuff but not really heavily yet. My basic need is right now my storage involves a cheap keep the curious out pistol safe and a lot of locked rifle cases. It's far from ideal but the co-op had absolutely zero room for more then that. If anyone's set on looting my house with a blowtorch and a sawzall I probably have bigger problems to worry about. Most of my breaking and entering type tool stuff wouldn't be in the house, but with the truck so that at least should be a help

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.