Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

mikeyjones

Members
  • Joined

  • Last visited

Everything posted by mikeyjones

  1. Lee recommends cci because they're a little harder cupped and seem to slide a little smoother in their chute but I wouldn't worry about it too much. When I was using a lee press exclusively, I used all different brands with no real issues.
  2. Same. .470-.471 as measured by my calipers.
  3. So general consensus is to sell it dirty. Maybe offer processing as "upgrades". I'll have to see what kind of shape the brass is in when I get it.
  4. PV just got a shipment of Tula SP primers in stock. 20k limit per item per order. http://www.powdervalleyinc.com/
  5. I use SS media to clean all of my brass. So it would be cleaned using that method.
  6. I might be getting a large shipment of 5.56 brass in a month or so from a military range. Now here's the question, when you buy your brass, do you prefer it dirty, cleaned, decapped, swaged, trimmed, etc? If I'm going to sell it, I'd like to batch process it to a standard most people would want. Thanks
  7. H2o is att, simple is tmobile. Net 10 depends on where you are and luck of the draw.
  8. #6 is seated upside down. I wouldn't be surprised at all if some of them were crushed during seating.
  9. Here is their FB page that mentions the deal: https://www.facebook.com/SecondAmendmentShooting Here is their # 850 615 4867 I'm torn as to whether I should order or not.
  10. If I didn't already have 2 builds going on, I would order another.. Did anyone try it yet?
  11. http://www.slickguns.com/product/new-frontier-armory-poly-lower-25 Get them while you can. Just follow the link on slickguns and call the gun store.
  12. It's a good route. Just be aware that for a smart phone, you'll have to either buy one from them or pay to have yours flashed over. What phone do you currently have?
  13. I don't think anyone has mentioned it yet so I'll put in my 2 c. I would consider the glock 17c for lower muzzle rise. It's ported out of the top so gasses keep the muzzle from rising too much. I like mine although I'm really not sure how much the porting really helps. I have both a stock and ported barrel and I shoot slightly better with the ported.
  14. It's the same brass you've used before? Brass varies by headstamp and even by lot. You as a reloader cannot put a crimp in the primer, but some ammo for military/le has the primers crimped in place. It makes the primer pocket really tight and needs to be swaged or cut before reloading. We really need more measurements before trying to guess. There's two different issues going on. Right now, I would take a few cases and resize them and see if they drop into your chamber. If they do, they're being resized correctly. Then the issue is likely oal or crimp(of bullet). The primer issue might be crushed or mutilated primers caused by crimped primer pockets or just brass with really tight pockets. Could also be seating depth. Could you post a few pictures of headstamp area of the rounds that didnt go off?
  15. Edit to above post since Tapatalk wont let me edit it. I see that you're saying chamber check so I assume that's your barrel. Are these cast bullets, plated, jacketed? Could be a crimp issue, could be oal. Have you tried just seeing if the resized brass will fit before it's loaded? To accurately check the depth you'd need a depth gauge. The fact that 1 went off the 2nd time around gives me some idea that they might not be seated deep enough. Either that or the primers are getting crushed during seating. That's why I asked about primer crimps above.
  16. What caliber is this? Was the brass crimped? Did you swage the primer pockets? As far as passing the gauge, just take your barrel out of the gun and use that as the gauge instead. My 45 cast loads dont pass my Lyman gauge but function flawlessy in my 1911s.
  17. Nj2as was talking of doing this. They're waiting to hear if a rejection will have any lasting effects on people's records. Ie will job prospects, p2p, nics be able to see that you were rejected.
  18. Have you checked the primer seating depth? Do these primers go off if you strike them again?
  19. Just got these pictures from our breeder the other day. picking him up sept 6
  20. Lots of unburnt powder in the barrel is a sign that pressure isn't getting high enough. Add more powder!! I'd also possibly try a magnum primer if you have any, although that's not going to make a lot of difference. Right now you're getting an inconsistent burn and therefore your pressure is going to be all over the place. I bet if you chronoed the bullets, you'd see a very wide spread and well under what that bullet needs to properly stabilize. Work up your load slowly and I'm willing to bet you'll see better results with higher charges.
  21. Who do you guys call in trenton? My pd has usually been 3-4 weeks but this time they're telling me 3 months. I called today (after 30 days of waiting) and was told that the state police was holding it up. Just wanted to give them a call and see.
  22. How long did it take in mt olive? Sent from my TF300T using Tapatalk HD
  23. Actually if you form a revocable trust, no CLEO signature is needed. Still wonder how this would work in nj.
  24. I got a blem from psa as well and about the only thing I found wrong was a scratch inside the magwell. I'll take that all day.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.