kc17

Thanks, I'm greatly leaning towards a BCM 1:7 twist. From all I read, that or a 1:8 seemed to fit my needs the best. Please don't ask me exactly why, because I'd have to read everything all over again. I'm not looking for AP ammo specifically, just want to make sure I'm OK to go with it if that's what I find. If there's a major price savings with 223, I may try it out, otherwise I'll stick with 5.56, no reason to go looking for problems, but I like the optional flexibility. Same with steel or brass.

I'm in the process of acquiring parts for my AR build. While I'm still a ways away, I've seen some holiday sales that may make it worth it to get the ammo now. From my preliminary research I'm under a few beliefs. 1: Since I'm going with a 5.56 barrel I can shoot 5.56 and/or 223. 2: Tracer rounds are a no-go. 3: The future legality of green tip ammo (from what I can gather green tip = armor piercing) is still up in the air. Anything else I should be aware of before I jump on one of these sales? Thanks Kevin

Details? What is course of action now? I'm no where near as familiar with these things as yourself or others on here.

I've already been in contact with Steve. I've bought from him before.

Great. Probably going to go with this upper once I decide on charging handle and hand guard. Unless any further research leads me away from the Mod 0.

Thanks for the explanation on the M4 and Mid Length differences. Could you give a comparison on the difference in kick that I may be able to relate to? For example 22 and 9mm pistol or 22 and 357. Or 22 rifle vs shotgun. Or am I trying to talk apples and oranges here. I'm not a large guy, so recoil does need to be a consideration, but I'm also not planning to lay down hundreds of rounds on a regular basis.

So clearly my question on the threaded barrel was a tad bit stupid. Since the Compensator is threaded, the barrel has to be. Which would mean I'd need to get it welded. Based on what I can tell, the only real differences in the charging handles is the size of the handle/grip. I'm thinking since I do not yet know what I like, I might be better served spending a little more for the ambidextrous one? I'm still trying to figure out the differences between the 16" M4. the 16" Mid Length, and the 16" Recce. The Recce is the highest price so I guess better build/material? The Mid Length middle price, and the M4 the lowest. I need to dig up the law on muzzle devices again (I know I've seen it on here somewhere) and see what I can decipher from that on the Mod 0 compensator I guess.

http://www.bravocompanyusa.com/BCM-M4-16-Upper-Receiver-Group-p/bcm-urg-m4-16.htm Listing says it has a Mod 0 Compensator, is that NJ legal? I do not see where it says if the barrel is threaded or not. I also see no mention of a bayonet lug. I will be attempting to read up on the different BCG and Charging Handle options offered, but will take opinions on them as well. Hand guard options seem straight forward enough, just need to decide on that as well. This would be getting mated to an Anderson lower (the one Steve is running the deal on) and this stock: http://www.brownells.com/rifle-parts/stock-parts/buttstocks/ar-15-m16-carbine-mil-spec-buttstock-kit-ar15-m4-stock-assembly-mil-spec-sku080-000-941-44659-99038.aspx

It's just like guns laws. A "feel good" distraction from the real causes of violence and hate. Politicians know they can't fix them, so they attack something they think they can control.

Looking online I'm not seeing dimensions listed. That and you mentioning position numbers leads me to believe that they are all standard sizes? I'm also seeing references to adjustable and collapsible stocks; same thing different term, correct?

About 5'6". Bladed stance. Also this will be primarily used for home defense, occasional range use.

Thanks for the fast and clear response. Not off the top of my head, no. I was thinking of going to some gun shops to get a feel for different positions that way.

I've been reading a lot of threads, but have not seen this particular question/idea. I know I must have a fixed stock. My dilemma is determining what length stock I "need". My thought is to buy the stock next. So far I have the lower and lpk. Then fit the stock, determine the position that is comfortable and pin it. As long as I do not have the upper in my possession it can't be said that I had the intent to build an evil gun, correct? Second part, which I believe I did see covered: I can pin the stock myself, correct? I don't have to have it done by an ffl or gunsmith. I just need to make sure it is permanently fixed. Thanks Kevin

Would anyone expect differently? Picked up a lower for my first build, got some education, and even shared some of my non-firearm related knowledge. Was an off topic subject, but demonstrated again the stupidity of politicians.

Thanks! It sounded like the one book mentioned in this thread dealt with using an AR, not building one.

Bringing old thread back to life as I'm in same position. Did you find a book that helped, Joe?

Sprinklers: http://www.nj.com/politics/index.ssf/2015/06/nj_senate_president_turns_his_sprinklers_on_gun_ri.html#incart_river Protest ban: http://www.nj.com/gloucester-county/index.ssf/2015/06/protests_at_sweeneys_house_sparks_regulation_in_we.html#incart_river

Any left?

Why didn't the cop issue him (or his wife) a ticket for blocking the sidewalk with the jeep? That creates a hardship and potential safety issue for wheelchair bound or otherwise handicapped citizens.

Disgusting. No doubt Berlin PD has her blood on their hands. Well written letter Bob. Interesting to see if the reporter does any follow up. Edit to correct: the Berlin PD and the politicians that oppress citizen's rights all have blood on their hands.

I'm right next to you in Cream Ridge. I've used Cream Ridge Liquors on 537 a couple of times, this last time they said the distributer sent the wrong size and it cost me an extra day. Overall though they get me my keg the next day. I also got a keg from Allentown once or twice. Edit to add: You mean the Canal's in Hamilton near the Shop Right? I didn't know there was one in Bordentown; if so, be careful I've gotten skunked beer from them more than once. And they were rather nasty about it when I wanted it replaced.

I have the shotgun version of the shotlock. Good quality, fast access, lag bolted into studs very secure. Tossed an old robe over it, nobody knows it's even there. Also have the smaller hand gun version.

http://www.allamericanclothing.com/ 100% American made. With American grown cotton. High quality and comfort. Excellent customer service.

I'm far from being a lawyer as well, but if a LEO calls someone and identifies themselves as LEO, I'd suspect that's much different than Joe Schmoe making that call. And I would think if that LEO is making such inquiries without justification, that's an issue. As for the matter at hand, if I found myself in this position, I'd contact the person calling and politely inquire why. If not satisfied with the response, then go up the chain and/or contact a lawyer and/or the NRA.

I admit I didn't read all of the replys, but I will echo much of what I've read. First, TAKE A SAFETY COURSE. Second, forget about passengers until you've got sufficient time in the saddle (same applies when buying new bikes). Passengers GREATLY impact a bikes handling. Physics doesn't differentiate which rider shifts the weight, the bike WILL change angle and therefore direction with passenger movements same as driver. Related to that try to get your passenger to join in safety course. Third, odds are you will learn your first bike will not meet all of your requirements no matter what. Time and mileage may very well change what your priorities are. Lastly, BE SAFE, I ride with the mentality that I'm invisible to most cages, and the ones that can see me want to kill me. Join motorcycle rights groups. Just like with 2A rights, the Nannies of the state want to take away our Freedoms. Try to be a good ambassador for the sport. Again, just like you would for firearms, hunting, etc.... Best of Luck. Again, stay safe, rubber side down, shiny side up.