Everything posted by WJFortier
-
reloading brass supplier
If I remember right, he's in Maryland. I can't remember how I initially found him. I had ordered a measly 500 9mm casings when it was a real bitch to find it. It was at my house 2 days later. He called me out of the blue the other day with another round of decent prices that I just couldn't say no too. I thought I'd pass it on to the group. Best of luck.
-
reloading brass supplier
If you're interested in reloading, contact Joseph Litofsky for decent deals on reloadable brass. He has a wide variety in stock and can handle larger volume orders. He doesn't really do the web-commerce thing by having a website but if you call him you'll probably be pretty happy with his prices and customer service. His email address is: [email protected] but prefers people just call him with inquiries (443)-677-2880
-
80% AR15 or AR10 experience
Thanks Checko. I didn't see the previous discussion. How do I delete this one!!! No need to waste the space.
-
80% AR15 or AR10 experience
Anyone on the forum have an experience with various companies producing AR15 or AR10 80% lowers? I've seen several online but I'm looking for companies out there with a quality 80% product. I'd rather get responses from people who have actually tackled this project chime in as opposed to people who just want to post their 2 cents. Thanks in advance.
-
Only in NJ...
When I first moved to NJ I went to Sports Authority to pick up a Crossman pump BB/pellet gun for a squirrel problem I was having. I nearly choked when the guy asked me for my FID. Initially I thought he may have not heard me so I asked again. He responded that he, in fact heard me but it was against the law in NJ for him to even allow me to hold the BB gun without my FID being placed on the counter. I was dumb-founded. I asked if that was true for the Red Ryder. He said even the Red Ryder. Needless to say I went on the quest for this elusive FID. I was living in Hightstown at the time. It took every minute of 6 months before I saw that FID but I got that BB gun. .338 Lapua or Red Ryder BB gun...same process, same wait. It's just ridiculous!
-
The end of airport firearms transport?
fishing? Now I'm REALLY confused!
-
The end of airport firearms transport?
I'm confused. So if I'm going on a hunting trip Midwest. This trip I usually bring 2 rifles and a revolver, hard cased/locked and I'm flying out of Newark. My flight gets delayed until the following morning so I have to stay the night in a hotel. Can I get hemmed up by Officer Friendly for having "access" to my weapons at the hotel?
-
JBMDL BX Gun shop?
I was hoping they'd break ground on a something out on the Range 14 complex. Apparently that would be too easy. The path of most resistance, that's the military way!
-
JBMDL BX Gun shop?
I know what you mean. I'm just hoping the "good idea fairy" that unfortunately seems to hover over that base doesn't put the brakes on the plan due to some "what if" scenario.
-
JBMDL BX Gun shop?
The rumor spreading around Joint Base McGuire Dix Lakehurst is that the current remodeling going on in the McGuire BX will ultimately be a gun shop. Initially that didn't compute with me. I've only known Marine Corps Exchanges to sell weapons so I stopped by and spoke with some of the staff there who confirmed that as fact. They indicated that there are still many hurdles and a finish line barricaded with red tape still needing to be crossed but they are very hopeful. Currently the base has very strict personal weapons restrictions. I'm sure they are aggressively working on Air Force Instructions to regulate purchases as well as removing them from the store AND base. AD, Reserve, Guard and retirees stand to benefit from this. My experience buying from Marine Corps Exchanges have always yielded excellent prices, the ability to order just about anything, low transfer fees and no tax. We'll see, we'll see.
-
Sportsman's Guide Free Shipping today only EXcludes ammo
In my haste AND excitement I misread the ad. I've since corrected it.
-
Sportsman's Guide Free Shipping today only EXcludes ammo
Sportsman's Guide is offering Free Shipping Offer Ends Tonight, March 27, 2014... Please Enter Coupon Code SH1883 at checkout. Unfortunately EXCLUDES AMMO
-
Spotting scopes? what do you have and do you like it?
I'm in the market for a decent spotting scope. A while back I bought some POS online. I could barely see 200m and had to use my rifle scope to plot hits. PITA!!! Needless to say, that spotting scope went into the trash. I realize this is another area where you typically get what you pay for but sometimes I hear of a diamond in the rough. I'm curious to see what people are using and if they like what they have, the price and where they got it. If it has some shortfalls, let us know. On the flip side, if you're able to see a gnats ass at 300m and you got it for under $250.00 DEFINITELY let us know!! Thanks.
-
Sports Authority Coupon 25% off single item
SAFRIEND25 gets you 25% off a single item until 29March http://www.sportsauthority.com/shop/index.jsp?categoryId=10823944&camp=PJ_AD:10823944:TSA_35410
-
Philly 3/28-3/30
After hitting the shows in VA, the Oaks shows have been less then impressive. There were so many NON-weapon related tables selling silly crap like dream catchers and fuzzy refrigerator magnets. We got so tired of hearing the buzz from people playing with stun-guns disguised as cell phones that we just left. Unfortunately, they are pretty much the only game in town when it comes to local shows so it is what it is. I still don't think they offer pre-paying for tickets. Be prepared for lengthy lines especially first thing in the morning. Bring that coupon, or be able to access it on your phone. Put that dollar you'll save to something that goes BANG!!!
-
Sierra Bullets factory store
That sounds like a really cool tour. That must be the re-loaders equivalent to Heaven. I'm pretty certain you heard angels singing and didn't even realize it! How did you get to tour the plant? Is that something they normally do? I'm very jealous!!!
-
Storing powder and primers
I agree with Louu...I happen to have SEVERAL for sale too. PA-120's (40mm ammo cans) Sorry, I couldn't pass up the opportunity to peddle my wares!
-
Storing powder and primers
I keep my open powder containers under my reloading bench and the primers in the bench drawer. My bulk unopened powder and bulk primers is in a Rubbermaid container with a large silica desiccant pack in it. So far, so good.
-
Buying Powder in NJ... FID Necessary?
you're probably right. If I found a local place that was consistently personable and had the stuff I needed OR could get it. I wouldn't really mind paying a couple of extra bucks. Instead I'd get the deep sigh and some condescending remark about being "a re-loader" as if we're a group of third rate citizens.
-
Buying Powder in NJ... FID Necessary?
I found it easier to place orders with my buddies hitting the VA gun shows. I've grown tired of the hit or miss attitude and lack of supply at the various shops in NJ. When I say "attitude" it's like I'm bothering the sales clerk to have to ask them to get me 2 1lb bottles of Varget or IMR off the shelf. Just a hint of attitude = me walking out the door to another shop. There are WAY to many shops out there with product to have to deal with nonsense like "self imposed" legislature and or a Holier than thou attitude.
-
Looking for a good belt.
what size? I have some Blackhawk riggers belts in black, brand new. I also have SPECOP belts (non rigger) available as well. My price with shipping will be better than what most just ask for the belt!!! Will
-
What gun to teach my girlfriend to shoot on?
I think the Ruger MKIII is a great entry level and beyond handgun. It's excellent for those just breaking into the sport. Little, if any recoil and provides and lot of bang for little buck. Field stripping for cleaning can be somewhat complicated the first time, but any weapon can be that way right out of the box. Just my $.02
-
Hornady customer service thumbs up
I was putting my Hornady Lock n Load AP through the motions earlier this week, pressing out some 9mm. I got to round 53 when all of a sudden "crunch", which prompted an immediate stoppage. It turns out that the guide rod that the primer shuttle moves on jumped out of its holder and somehow wedged itself in the ram. The piece that supports the guide rod on the upper end is plastic. Unfortunately that's where the crunch sound came from. It broke into 3 pieces, totally unsalvageable. Early the next morning I call Hornady. I get an immediate answer from...a person. I know, it's almost too hard to believe. She was great. I explained what i did. she helped me decipher the schematic to find the exact part number. Pulled down my info and said a new one is on its way. Friday I found a small little box from Hornady in my mailbox with not one but two replacement parts. (She must know I'm going to break another soon). One minute replacement time and I'm back up and running. I just wanted to take a second to toss out kudos for the great customer service they provided.
-
22 lr is coming back
You guys will have to excuse the potentially dumb question I'm about to ask. I was out of the country for a while only to come back to .22 LR and .22 WinMag being impossible to get. WTF happened? I was astonished to see such limited supplies. The couple places that did have a box or 2 must be selling gold plated ammo at the prices they were quoting.
-
Another "What Progressive Press" Thread...
I recently picked up a Hornady LNL AP from Optics Planet. They had a 10% site-wide savings event AND free shipping so I gobbled it up. I had been going back and forth between the Dillon 650 and the Hornady LNL AP for a while and finally chose the LNL AP due to the quick die changes and the case/bullet feeding option. I did an decent amount of research to ensure when I purchased it I had all the other items needed coming in at the same time. The LNL AP comes in a huge box but unfortunately not everything you need to start loading comes with it. Even so I'm still finding things I could use to make my life easier. If you are considering the LNL AP you’ll need to know what calibers you plan on using it for. In my case it’s .223, .40 and 9mm. I have a Lee turret that is solely set up for .308. Additional things you’ll need: Shell plates for the calibers you plan on loading Bullet feeder dies for the automatic bullet feeder Case feeder plates appropriate for what your loading Powder through Expander (PTX) or Powder funnel (to flare your cases) Nice to have: Ultramount (www.inlinefabrication.com) raises your press approx. 9.5” (no bending over to run the press) LED light within the press to see what’s going on The LNL AP comes with 10 of their die bushings which work with any 7/8” x 14 die threads. I currently have all Lee dies and have yet to encounter a problem. My biggest issue is trying to optimize the 5 press stations. The automatic powder drop, bullet feeder die and the powder cop take up three stations right off the bat. The addition of a PTX in the powder feeder is necessary if using the auto bullet feeder. It flares the case rim just enough to support the base of the bullet until it gets seated in the next station. As you can see the station availability starts to dwindle quickly. If you are a crimper like I am, consider seat/crimping dies as well. Assembly is fairly straight forward and the included DVD helps too. Lifetime warranty just like Dillon You’ll also get 500 free rounds with your purchase but the promotion ends soon. I almost forgot. You get a really cool tin sign too! (hey, it makes a great target backing)