louu

Also, just get a scope. It's easier for lots of reasons, you can focus it to your specific eye sight. I hate watching guys take a half dozen shots at a plate that should only take them 1 because they can't see it.

You can get stuff cheap from cabelas if you use active junky and get the discount gift cards from ebay. Right now ebay has $100 cabelas gift cards from SVM gift cards for $82, that's 18% off right there. Use Active Junky and get another 6% off. If you PM me your email address I'll send you an invite to Active Junky and we will both get $10. I got the Vortex razor hd for under $1000 doing it this way.

I'll recommend anything from Vortex because it's good shit, they support the 3 gun community and the warranty is unbeatable. As far as red dot or scope that's up to you there is divisions for both. Every big match tac-ops (tac-scope) is the biggest division. Some matches like the topton/New holland series only honors tac-ops.

I can't believe that place is still in business. Why not join a normal outdoor range? How far are you from Quinton sportsmans club?

We watched it last night. I thought it was going to be one of those weird movies that is pretty funny but it wasn't funny at all. It did keep my attention though.

SAFETY GLASSES!!! You might think, or not even think about it, it's just a little spring and I know what I'm doing... The truth is that little spring can cause permanent damage to your eye. Den u don't no ize 2 shoot oat kid

Let me know if you want to go to any steel challenges at CJ I try to go to most of them, we can squad together and talk 3 gun. They are the first Sunday of the month. http://www.centraljerseysteel.com/home.html

Like Alex said it would be a lot easier to start with Steel Challenge that was you can get used to all the basic safety requirements, range commands, safe table rules while only concentrating on one gun. USPSA would be the next step so you can get use to running around with a gun and not break the 180. I'm not trying to steer you away from three gun but I've seen so many people come out for the first couple of matches not having shot any other type of action match and break the 180 with their shotgun every time. The Shotgun is a whole nother animal and takes some practice at home (with dummy shells) to get use to loading, moving different directions and all that. To go backwards a little bit in this post I will say that steel Challenge and USPSA is a hell of a good time and you will meet some awesome people. Is also super addictive. Myself I'm strongly against all those tactical Timmy training classes unless you're a police officer or something like that. They're way too overpriced for what you get. Spend that money on ammo and you will naturally become better at gun handling. I'm usually around most Sundays unless I'm shooting a match somewhere and I will give anyone a basic 3 gun class for free and that goes for everyone. Some of the ranges in the area require you to have a USPSA or IDPA classification in order to compete at their 3-gun matches. Quinton Sportsmen's Club does not. Obviously I don't know you so I have no idea how familiar you are with this stuff. I have seen some people come out to a 3-gun match having not shot any other action match before and do really well and we're perfectly safe the whole time. Not sure how much gear you have or how much you looking to spend but if you like I can post some links to places to get stuff and some less expensive entry-level things to get to get you started.

First official match is the fourth Sunday in March. We're probably going to do another introduction to 3 gun shoot in February but I might get that moved if possible to mid March.

Hi Tony, Have you ever shot any kind of match, steel challenge, uspsa, idpa, or anything like that?

So all you did was send an email??? Then came on here to pat yourself on the back, look for praise and donations. Good job I guess? Come back with a phone number or an address of someone for us to call and write to so we can really help this guy out. A donation page for his legal fees if he can't afford it. Normally I wouldn't call someone out like you because I'm all for people at least trying to help people like this young man. But, you called me out in another thread ASSUMing I didn't know what I was talking about and you are the only person that made an ass of themselves in that particular post. I spent a lot of time researching groups like yours and including yours over the years and that entitles me to speak the way I do. Also, I'm not one to hide behind a keyboard and criticize people, I'm probably the easiest person to find on here. I really do mean it when I say thank you for at least doing something though.

Did you vote for Hillary or are you joking?

Wish you guys were speaking English, sound like I can get some money somehow. My taxes get paid by the bank with the mortgage so I have no idea what happens or when.

Looking to get a bigger safe next week reading reviews on Liberty most are good some are bad and a lot say they are over priced for what they are. Cant find too much on Champion safes but what I did find is good. Anyone have any opinions on these?

You need to watch this movie, even though I'm hypocritical enough to be telling you this from a smartphone.

Wasn't there already a thread on here about the US law Shield? I've been searching for a while and I can't find it

Mine's a couple years old and it's the same as that, slides over the boat head and you tighten it from the back. I thought it was going to break off to until I got it all smoothed out.

This guy gets it. All this shit was already discussed when it happened like a year ago on this very forum. By the time everyone typed all that they could have called 5 times. Just call and if you feel proud post about it, no need to pick her apart or judge, all NJ gun laws are unconstitutional.

I hope youze guys called, it takes less time and effort to make that call than it did to post here. It's the season of giving so let's help give her her freedom.

Short read, Call Christe's office and ask him to pardon Megan Fellenbaum 609-292-6000 it will only take you 20 seconds. She is from America and got stopped on this side of the wall with a gun so now she goes to prison. Long read from the NJ2AS email Well... here we go again! New Jersey’s draconian gun laws and overzealous prosecutors have once again entrapped an innocent Pennsylvanian woman. Meg Fellenbaum - apparently a danger to society in New Jersey, but not Pennsylvania - allegedly committed the horrific crime of having her firearms locked in the truck of her car while driving to pick up her girlfriend. However shocking this may be to anti-Second Amendment activists, no one was victimized by Meg's actions. Despite not posing any threat - after a year of terror inflicted upon her by New Jersey’s (in)justice system, prosecutors successfully broke Meg down and frightened her into accepting a plea deal of one year in prison (instead of facing trial and up to 13+ years in prison if she did not accept the plea deal). I wish we were making this up, but this is New Jersey... Without going into all the details and injustices with her case (some of which we've already addressed in previous stories) we are requesting everyone call Governor Christie to urge him to pardon her before he leaves office. Please call and/or write to Governor Christie: 609-292-6000 Office of the Governor PO Box 001 Trenton, NJ 08625 We will be calling every day until she is pardoned; we ask you stand with us and make a simple call, too, or write a letter regarding this terrible injustice. We have gotten to know Meg Fellenbaum over the past year and we cannot think of a better example of someone who has been entrapped by New Jersey’s ridiculous laws that seek to criminalize honest Americans! If you would like to donate to Meg’s legal defense fund please click here to donate so we can assist with her legal expenses. As many of you know, the State of New Jersey fights innocent people with endless taxpayer funds while we have to get second mortgages on our homes to defend ourselves. So even if you win, you still lose. Once again, we ask that you call and write every day until she is pardoned by Gov. Christie. This madness needs to stop! New Jersey Second Amendment Society http://www.nj2as.org/

No Razzo said the bolt that holds that whole structure on through the square stock keeps loosening up and he used a piece of angle iron that holds it tight. Also something about the plunger loosening up and I'm a little confused.

Can you post a picture I'm dying to see that. Matry, one thing you can do for now is use one of those one dollar led flashlights sitting on top of the hole in the middle works really nice for a temporary sky light. Also I have the bully adapter and the Lee 4 tube thing. If you get your bullet feed dies to work reliably I'll trade it or sell it to you if your interested.

I'll tell you from experience the Hornady bullet feeder dies are a real pain in the ass. By the time you load all the tubes you should just put the heads on by hand. Everyone gets their own system goin with this press, you can get a good rythum going just placing a head, load a case and pull the handle (the in line roller handle is awesome). Another thing I did was weld a pice of flat bar to the back of the tray holder so I can put another tray on the front for my heads. I also like placing heads by hand so I can look at the powder. With the case feeder you can really get rolling, all I do is pull the handle, look in the case and place the head. I forgot to say about the Hornady bullet feeder dies that they only work about 60% of the time. You constantly haVe to mess with them

I never had trouble with that bolt your talking about but at first I did notice a shit ton of flex on that cast part, I thought it was going to snap in half. It was because there was so much binding in the pivot block. I polished the bottom of the pivot block, the top of the stationary block and the ramp where the rod pushes up to a mirror and greased it up. Now it's super smooth and does not bend like it use to. For your shell shuttle isn't there a plastic insert inside that rides on the rod?

Marty did you get a light kit for it? I have this one and its good enough https://www.amazon.com/Hornady-44660-Lock-N-Load-Light-Strip/dp/B00AU6C4X0/ref=sr_1_fkmr0_1?ie=UTF8&qid=1513716097&sr=8-1-fkmr0&keywords=Hornady+light+kit It's sticky on the back but not sticky enough so I had to use zip ties to help it out. Make it wrap around the top underneath and it lights up the powder pretty good. I just found out about this one, it looks awesome but if it comes unstuck that would suck http://kmssquared.com/ufo_h.html