Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AVB-AMG

Members
  • Joined

  • Last visited

Everything posted by AVB-AMG

  1. @Kevin125 I was wondering about your taste... now I can see that you don't have any.... Who on earth does not like traditional Eggs Benedict consisting of poached eggs with Canadian bacon on an English muffin covered with Hollandaise sauce, or for relevance to this thread, Eggs Benedict with that meat product that should not be named.....??? AVB-AMG Or below, with that meat product that cannot be named......
  2. @jasonx FYI - Over the years, I have asked numerous gun folks, (including former members of the military; gunsmiths and firearms manufacturer reps), about their preferences for this supposedly straight forward gun lubricating topic and have received multiple and contradictory opinions. I started to realize that many gun folks really do not know the differences between greases and oils, and in time, the gun community creates a herd mentality or group think which is based not on facts, but on the endless repetition of dogma. I recognize that everyone has an opinion on this topic and sticks with whatever they have been using that works for them, which is fine. Ultimately, either grease or oil will both reduce friction and wear on the moving parts of a firearm and both will fight corrosion. Most importantly, as @PeteFsaid earlier, any lubricant is better than no lubricant. Now after doing my own research, along with some trial & error testing to satisfy my curiosity, FWIW, this is what I have learned, concluded and the process I follow: There are numerous products on the market that are made specifically to Clean, Lubricate and Protect (CLP) firearms, as well as lubricants intended for other applications, (i.e. Mobil 1 synthetic motor oil). Most of them work just fine for firearms and the important thing is to use them on a regular basis. Yet, I am also aware that over lubrication can be worse than no lubrication, as it can collect debris and cause fouling internally and potentially lead to a malfunction. How you lubricate your firearm really depends on two important variables: one is what the environmental conditions are when you are shooting and the other is just how tight the fit is of the moving parts of the gun. Historically and generally speaking, grease has performed better in hot and wet conditions, whereas oil seems to work better in very cold conditions, where some grease can turn into the consistency of bubble gum. @JackDaWackmade an important point regarding lubrication for long-term storage. From my experience, for long-term storage, I prefer to use grease since I have found it to be a better rust inhibitor than oil. So that, along with a thin coat of silicone on the metal exterior parts will usually combat the natural corrosiveness of humidity over time. Also, my preference is to use separate products to clean, lubricate and protect my firearms, instead of using one product that claims to do all of the above (CLP), such as Ballistol multi-use spray or Break Free CLP). While these products may work fine for some folks, I do not believe that one size fits all. I find it hard to believe that one product will do as good a job of cleaning, lubricating and protecting all parts of a firearm, as compared to different products that are formulated to do one specific task and do it really well. I also subscribe to the old axiom of “if it rotates use oil. If it slides use grease”. Grease is just a lubricant with a thickening agent to help keep it from migrating. It makes sense to me that for high friction reciprocating surfaces such as a slide, that a grease that stays in place and does not evaporate in high heat and does not easily seep into other parts of the gun, would be preferable to any oil. Viscous gun oil tends to displace more easily from their original and intended use location, which may potentially be a problem. I clean my hand guns, rifle and shotgun after every use on the range. Not just because it is a good habit to have, but I find that the process is actually quite “zen-like” and satisfying, providing sort of a therapeutic and relaxing aftermath to the focused concentration of aiming and shooting at targets at the range, in my constant quest to improve my accuracy. Some additional benefits in doing this are that I have a better understanding and appreciation of how each gun is put together and operates, as well as being able to see the effects of shooting different types of ammo through my guns and obviously preventing the buildup of carbon and metal deposits in the bore and inside the body of the firearm that could lead to fouling and failures. My approach and product choices can be itemized as follows, where for the most part, I use the M-Pro 7 military grade gun cleaning system and lubricant product line, using their specific products for each task; http://www.mpro7.com/ The M-Pro 7 products are used by the U.S. military and perform above the minimum MILSPEC requirements. For example, the minimum cleaning efficiency for the MILSPEC is 70%. In an independent government funded test the M-Pro 7 Gun Cleaner scored 98% cleaning efficiency for one cleaning pass and worked 4 times faster than most other cleaners, which scored between 50% - 74% cleaning efficiency. I appreciate that all M-Pro7 gun cleaning products are odorless, non-hazardous, biodegradable and non-flammable. I found the M-Pro 7 line to be very appealing since they use a unique blend of modern chemical technologies containing corrosion inhibitors and surfactants with a non-toxic solvent base to provide superior cleaning without the intense smell of other cleaners. Cleaning: The M-Pro 7 Gun Cleaner thoroughly strips the surface of all oil and grease. It breaks up carbon particles from the bore steel, therefore allowing for a very good job of removing both the surface carbon particle along with the embedded metal fouling. In the cleaning process I use brass and soft bristle brushes, cotton patches as well as bore snakes in tandem, treated with the appropriate cleaning solution. I like to use a can of compressed air to blow out any remaining cleaning solution from those hard to reach areas. Once it is dry, I will apply the appropriate gun oil or grease as the lubricant, where necessary. Lubricant: The M-Pro7 Gun Oil LPX replaces all other gun oils, CLP's and dry lubes with the benefits of each and none of the issues (evaporation, separation, gumming, odor, etc.). It is formulated with high quality synthetic oils and their propriety additives, allowing this oil to approach the lowest known friction coefficient. I also use Mil-Comm Products’ TW25B Synthetic Grease (https://www.mil-comm...t_category_id=5) As @PeteF stated in his first post, I also received a small tube of gun grease when I bought my Sig Sauer P226 MK-25. This is the gun grease that Sig Sauer recommends highly to be used on their handguns, especially for the metal-to-metal sliding surfaces, such as racking the slide, etc. The grease is the American-made Mil-Comm Products’ TW25B Synthetic Grease. It has proven to have exceptional lubricating performance in adverse weather conditions which has made it the preferred gun grease used by US and European Military. I like the fact that once applied, this grease does not migrate or seep around to other areas of the gun, specifically the exterior of the gun. The plastic, re-closable tapered tip is useful for applying a small drop or bead to specific or hard to reach areas. I use this grease for lubricating the rails of the slide & frame, whether it is metal-to-metal or metal-to-polymer, on all of my handguns, as well as on the receiver and barrel hinge pin of my O/U shotgun and the threads of the chokes. Finally, after I finish cleaning and lubricating the handguns or rifle, I wipe any excess lubricant off with a silicone treated microfiber cloth to remove fingerprints and impart a light protective coating of silicone on the metal parts. Try out this and other products and decide what works the best for you, based on how much time and effort you want to expend and what level of care and attention you want to give to your firearms. Good luck! AVB-AMG
  3. It sounds like everyone who was able to attend enjoyed some really nice weather and had a good time busting clays, as well as plinking. I was out at LVSC on Thursday doing the same, but was unable to join all of you yesterday since I had already committed to a round of golf. I look forward to the next shotgun shootout in either August or September. AVB-AMG
  4. @Sniper You know that your comparison of me to Gregory "Joey" Johnson is totally bogus and just your inflammatory way to personally attack me without really considering the point(s) I make and respond with an intelligent and articulate comment. From my previous posts here, anyone can tell that I respect our flag and what it stands for. I totally disagree with the association of our flag to other issues that Johnson made in his quote that you posted. In a similar fashion, it would be if I compared you to and cited one of the many hateful proclamations made by Richard B. Spencer, the wife-abuser, American neo-Nazi and white supremacist and president of the National Policy Institute, a white supremacist think tank. That would be an extreme over reaction and not fair to you, even if you may agree with some of his stated positions. I really do think we all need to throttle back down the hateful comments. Yes, I have been guilty of writing some incendiary posts and will try not to make them personal towards other posters and focus on the point I am trying to make. It is hard not to take criticism personally, but I think that I and all of us should at least try to rise above making negative comments towards each other, ranging from snarky barbs, to petty insults to slanderous and hateful accusations, since they clearly are not productive and just makes things worse on both sides. Also, we are all human with imperfections and histories of decisions and actions performed in the past that we now may regret or would have done differently. So there really never will be any candidate devoid of flaws or previous bad choices. Therefore, we all have to make do with whom we feel, moving forward, will have learned from their past successes and failures, and act and perform their duties in the best interest of our country. We all are free to make that challenging choice and decision ourselves, which of course includes taking a chance and/or leap of faith. That is one of the reasons I am currently leaning towards supporting Joe Biden's candidacy. Yes, he has had some creepy moments with people and I do wish he could just come out and sincerely apologize for how he treated Anita Hill at the Clarence Thomas hearings in the Senate. Yet, from the current ridiculously large crop of Democrat candidates who have migrated to the far-left, (way too far in my opinion), I think that Biden is the most moderate and acceptable of the bunch. So is it really too much to ask for you and others to accept that there are many folks who really do not like Donald Trump and never have and are seeking a viable alternative candidate to vote for? You may not agree with us, but that is the beauty of our Constitutional system, 1st Amendment rights, that allows us all to express our different opinions. But ideally, to do so respectfully. AVB-AMG
  5. @Mrs. Peel: Ok, I deserved that..... Upon further reflection, I can now answer your question about what was my trigger point to comment on this. I realized that I was equating and associating these current pickup truck flag wavers, with the ones I saw down in NC several years ago, when they would have both the American flag and the Confederate Battle Flag together. I assumed, probably incorrectly, that they may have been the same folks. I was very incensed by that gesture at that time, for all of the reasons I expounded upon in the thread I started here on NJGF that was dedicated to those Confederate symbols and their meaning today. (See photo below of similar trucks that were cruising around NC back then). AVB-AMG @fishnut Well, at least you reserve flying it only on holidays.... AVB-AMG
  6. @Zeke Get this instead.....
  7. @fishnut Did you have a choice in where you were born....? I did not, nor does anyone else. AVB-AMG
  8. I put out the American flag on our house on specific holidays, including President's Day, Memorial Day, Flag Day, Independence Day and Memorial Day. I do not feel the need to fly it on our house all the time, but do not have a problem with others who decide to do so. I consider myself to be a patriotic American, recognizing that through the accident of birth, I am an American citizen who also appreciates our country’s history, why it was founded and respect and cherish how important our Constitutionally-guaranteed freedoms are. I believe that too many Americans take our freedoms for granted. They fail to appreciate and honor those Americans who have fought in wars and have either been wounded or have paid the supreme sacrifice with their lives to ensure that we maintain those freedoms. I believe that our flag is an important symbol of that understanding and pride of the actions our citizens have taken to defend the ideals they and we feel is important enough to die for. Pride essentially comes from an accumulated knowledge of one’s history. One can be proud of yourself and your actions and achievement, as well as those of someone close to you. But for anyone to say they are proud to be an American or proud to be a descendant of any specific culture is pretty lame. You can be thankful, grateful, relieved to be an American, but pride does not really extend to one’s country. There's patriotism and there's dogmatic patriotism. Some people are smart enough to know the difference. This is a lead up to the following: I am currently down in NC at our beach house this week and yes, we are just a short time away from our Independence Day national holiday. For the past number of years, I seem to have seen quite a number of young white men driving pickup trucks with one or more large flags mounted in the truck bed on short poles. Half of these pickup trucks are the really large ones that are lifted up monsters with huge wheels and tires. I really do not understand the reasoning, let alone the appeal of going to such lengths to fly our flag that way and it got me thinking. I am certainly open to the idea of everyone being able to voice their opinion, (free speech). Yet, I have just assumed that this sort of pick-up-truck-flag-waving, is just self-perceived people going to an extreme to shout out and portray themselves as being very "patriotic". But it also risks coming across as people being very holier-than-thou and pretentious about it. Their message always seems to scream to me "We are more patriotic than all the rest of you." It's a form of virtue signaling. Not so different than putting a political slogan bumper sticker on your car. It's just bigger and "bad ass" and certainly very tacky. I also think that in today’s ever more polarized political environment that these pick-up-truck-flag-wavers say that they are being patriotic, but really are promoting their tribal sense of nationalism. True patriotism is demonstrated by one’s actions, such as buying domestically-produced goods and products, paying all of your taxes, or *honest* public service, and serving one’s country, and not by a ridiculous mobile rodeo show. When you don’t know any better, you mistake tacky-ness with patriotism. BTW, this phenomenon is not limited to the U.S. but can be seen in other countries as well. I guess it is human nature that people feel the need to belong to something grander than themselves. For some of these folks, such as unaccomplished, mentally challenged hicks, other than being born here in the USA, they really don’t have much going for themselves. They may try to compensate for their lack of accomplishments to buy a big flag, that really is an “in-your-face” rolling nativist statement claiming that they have a deeper sense of patriotism than those Americans who do not drive around with big flags, which of course a total crock of crap. So the more I think about it, flying the American flag in the back of one’s pick-up truck, without merit, until it gets ragged and tattered is just plain disrespectful. When I see that I can conclude with reasonable certainty that the only America that the driver likes is the one in their fantasies and that given the chance they would happily see the actual country burn. AVB-AMG
  9. @brucin: Sounds nice.... Where in the Adirondacks are you? I assume that the approx. 2-week, carnivorous black fly period is now past... right? Years ago we would go up to Saranac Lake, as well as Lake Placid, both in the summer for hiking and water sports and winter, for skiing on Whiteface mountain, staying at some of the former great camps that were converted to Inns. For the past decade, we usually go up to our regular place, in either August or September, that is surrounded by the Dix Mountain Wilderness area in the Adirondack Park. In recent years, I have been bringing along a bottle of my go-to bourbon, Blanton's single barrel to enjoy out on the porch. AVB-AMG
  10. @silverado427: I agree... thanks for posting the movie preview on YouTube... AVB-AMG
  11. @GRIZ: Yes... That is correct. The first American automobile that was driven by an American team to win Le Mans was back in 1921, by the team of Jimmy Murphy and Ernie Olsen driving a Duesenberg 183 Grand Prix race car. The Duesenberg brothers sent four (4), 183 cubic-inch cars equipped with four-wheel brakes, a unique feature for any race car at the time, to France to compete in the first post-war French Grand Prix Race on the roads of Le Mans. Three cars were driven primarily by Jimmy Murphy (the overall winner), Joe Boyer, and Albert Guyot. Back in April, I visited and toured the Simeone Foundation Automotive Museum. If you like sports cars, specifically race cars with special provenance, don't miss this hidden gem of a recently opened museum, that I had previously been unaware existed in Philadelphia, PA. The museum's collection consists of approximately 65 racing sports cars that has been assembled over more than 50 years by Dr. Frederick A. Simeone, a retired neurosurgeon and native of Philadelphia. In his collection is 1 of the 3 Duesenberg 183 Grand Prix race cars built, that competed in that 1921 Le Mans race and also raced and finished 2nd in the 1922 Indianapolis 500. Dr. Simeone found this car at a used-car lot in Kensington, Philadelphia. Here is a photo of that car that I took at his museum. AVB-AMG
  12. @GRIZ: Also, take a close look at the little checkered flag decal affixed to the front fender of the GT40. It is a little dig at the Ferrari logo of the prancing horse. Ford put an arrow through it to signify their goal of winning Le Mans and beating Ferrari..... AVB-AMG
  13. @GRIZ; You may or may not be aware of this little fun fact tidbit. Dan Gurney was a tall man, just over 6ft. tall. The Ford Mk IV GT40 had very limited headroom. So the engineers on the Ford race crew cut a hole in the roof of his GT4O to give Gurney some additional headroom and then riveted a shallow domed cap over the hole, that Dan Gurney referred to at "the bubble". Here is s photo of the GT40 J-Chassis, that Dan Gurney drove at Le Mans, along with A.J. Foyt, showing that minor roof modification. The car has been restored and is currently on display at the Henry Ford museum in Dearborn, Michigan: I have seen a number of Ford GT40's with historical race provenance at a number of car shows and museums that I have attended and/or visited. The Ford GT40 pictured below is currently owned by Miles Collier and is part of his magnificent automobile collection at the Revs Institute in Naples, FL. My wife and I visited and toured the R.I. back in March. In mid-June 1967, this Ford Mk II-B GT40, which had started life as No. P/1031, a 7-liter Mk II GT40 built at Ford Advanced Vehicles in Slough, England, mysteriously changed identity and became No. P/1047. “There were a lot of shenanigans with the GT40s,” recalls a Ford insider. “At the start of each season a large bond had to be deposited to ensure its appearance on the start line. In the event of an accident that made it impossible to repair a car before it was due to race again, it was less expensive to switch chassis plates with another car than forfeit the money that had been deposited…” That is what seems to have happened to this GT40, which had already completed a grueling season’s racing in 1966 before being uprated to 1967 Mk II-B specification, with its 427 cubic inch V8 engine modified to deliver greater power, reliability and durability with a “dry-deck” cylinder block and a new induction system. For the 1967 Le Mans 24-hour race, Ford, who was very anxious to repeat its sensational 1-2-3 victory of 1966, entered a six-car team. There were two Mk II-B GT40’s, (this car), which ran as No. 57, painted light blue, and No. 1047, which was painted gold and ran as No. 5 – and four of the new lighter and more aerodynamic Mk IV “J-cars” with bonded aluminum honeycomb frames. Additionally Ford-France entered a third Mk II-B (No. 1015), while JW Engineering, which had taken over the FAV operation in Slough at the beginning of 1967, ran a 289 cubic inch GT40 and two 305 cubic inch Ford-powered Mirage sports prototypes. This car retired after 18 hours with a seized engine. GT40 No. 1047 had already crashed and would not race again that year. After a hasty rebuild by Holman & Moody in Charlotte, North Carolina, this car, now fitted with the chassis plate of No. 1047, returned to France and won the 12 Hours at Reims just two weeks after Le Mans. It was the last Mk II – and the only Mk II-B – to win a race. AVB-AMG
  14. Does anyone here know what they are referring to for both of these upcoming festivals in NJ?? AVB-AMG http://www.trentonporkrollfestival.com/ http://porkrollfestival.com/
  15. @W2MC: Back in the early 1980’s, as a young architectural designer working in Manhattan, I was invited by I. M. Pei’s design team Partner to join Pei’s design team for this project at the Louvre in Paris. While very flattered, I respectfully declined for reasons then that I now truly regret to this day. Architecturally, this solution put the vast majority of new art gallery, administrative and back-of-house spaces and functions underground and not in the original museum. That freed up more space above ground inside the Louvre that was converted into state-of-the-arr exhibition gallery space allowing them to show more of there massive art collection. The glass pyramid element is a wonderfully simple, yet very dramatic geometric form that serves as both a skylight and the new entrance to the museum, surrounded be large reflecting pools of water. Having been there on a number of occasions, I consider it to be a very sensitive and appropriate design solution, that ultimately was respectful of the original building, as well as complimenting it by adding a new simple geometric form that was a transformative sensitive gesture that solved the many programmatic requirements of the project. IMHO, the fact that over time, the glass pyramid has become the immediately visible icon for the Louvre is a testament to I.M. Pei’s brilliant creative design solution. @remixer: I think there are architectural examples where “you can have your cake and eat it too”. There are many historical buildings that retain there original exterior facades that have been thoroughly renovated and modernized inside. There are other examples of older masonry buildings where just the replacement of their original windows with new, insulated windows with no mutton’s, has given the resulting appearance a refreshing update, along with a more energy saving benefit. Yet, there are also some unfortunate attempts where the Owner, Developer or Architect were not appropriately sensitive to respecting the important aspects of the original building’s key design elements and the result is an embarrassing failure. I understand that all of this can be very subjective and opinions lay in the eye of the beholder. As an Architect, I prefer that we keep as much of our historically important buildings as possible, either renovating them where practical or converting them to a new use(s), if they are no longer able to realistically serve their original purpose. A good example of this in Manhattan is the conversion of a number of recognizable pre-war office towers into residential buildings, such at the Woolworth Building and One Wall Street. This is being done primarily due to their limited floor-to-floor heights that will not work for office space today. Plus, the spectacular views from these buildings allows for (ridiculously) expensive sq.ft. sales prices. All of those apartments are completely modern, with contemporary features, amenities and appliances, yet may also incorporate some distinctive original design motifs where possible. AVB-AMG
  16. @Mrs. Peel: I have to disagree with your adamant declaration here. Since it is relevant, I will repeat an analogy that I have used here in earlier posts: When this sort of issue pops up regarding a historically significant building that may be an architectural landmark, the usual battle cries are often heard as follows: Conservatives: "Restore it just like it was and do not change how it looks...." Liberals: "Tear it down and start over again with something completely new and modern....." Moderates: "Restore the important parts and renovate and modernize, (improve) the rest...." As I said in my earlier post in this thread, Notre Dame, while a significant landmark in Paris, today serves more as a recognizable landmark, than it does as a Catholic church/cathedral or national icon. Recognizing that reality, and understanding that what was destroyed in the unfortunate fire was essentially the wood structure supporting the roof, along with the roof of the cathedral, there is much latitude in what can be done in the restoration/renovation/reconstruction process. Newer and more appropriate materials, such as steel trusses may be used as the new structural support for a new roof, using more durable materials. It was and will again be located above the vaulted ceiling of the Cathedral and not be visible to parishioners or tourist visitors below. Adding a sprinkler fire suppression system will also be an important new installation and will not detract from the architecture. I applaud President Macron's vision and decision suggesting that there should be an international architectural competition to solicit schematic architectural designs on how to best approach the restoration/renovation/reconstruction of Notre Dame. I am not going to draw a line in the sand saying that this building should ONLY be what it was, but am open to hearing and considering other suggestions on possible adaptive/re-use programs that could be also incorporated into this building....(As long as it is not a bank, remember: Jesus threw the money lenders out of the temple....comes to mind). No commitment needs to be made at this early stage so let's hear everyone's ideas and suggestions and then determine if any of them make practical sense and if it would be a good additional use for this building. History has many examples of the adaptive/re-use of buildings, especially religious buildings since in many cases they were the largest and most solidly constructed buildings at the time. Therefore, this option is nothing new and has legitimate historical precedent. This sort of reminds me in part on the whole debate on what should be done down at Ground Zero after the 9/11 attack on the WTC. That politically and culturally charged debate took over a decade to resolve itself... Architecturally, I have no problem if an international architectural competition generates some spectacular ideas that would ultimately compliment and accentuate the visual interest of this cathedral. One concept would be an interesting form for a skylight that would allow diffused daylight to enter the cathedral, which is usually a very dark space. I am confident that there are plenty of talented and creative Architects and designers out there who will be motivated to come up with designs that none of us can currently envision, that would enrich this building, making it even more of an important national landmark, than what it was prior to the fire I also make the distinction between Notre Dame and other national architectural landmarks in how I categorize their importance, both historically and culturally. For example, I think that the Eiffel Tower and the Arc de Triomphe, both in Paris, are truly valid French national icons, in addition to being important landmarks and points of reference. Notre Dame is not in the same category, even though it is a national landmark and tourist attraction. Therefore, I would agree with your adamant stance if we were talking about restoring/rebuilding a damaged Eiffel Tower or Arc de Triomphe, but not with Notre Dame. Let's see how all of this plays out. AVB-AMG
  17. We are in Philly this coming weekend for my wife's grad school reunion. Then we will be traveling down to NC for the following two weeks. Maybe I can attend the next Shotgun Shootout in June....? AVB-AMG
  18. I will apologize in advance for this post being off the topic of the thread's title, but for the lack of a more appropriate thread on where to post this, I decided to post this here. I received an email today from RM Sotheby’s auction house with an update of the various automobiles that they have had consigned for auction at this year’s big automobile auction in Monterey, CA in August. I had to chuckle when I saw this and read about it and had to think of NJGF’s very own, @Mrs. Peel. This would be quite the comical conversation vehicle to drive around town, but I would be very reluctant to attempt to take it out on any sort of highway. How about it.... would you like me to bid on this car for you Mrs. Peel? FYI, the Trident was manufactured by Peel, a building of fiberglass boats and motorcycle parts, located on the Isle of Man in the Irish Sea. The Peel Trident was launched at the 1964 British Motorcycle Show in the UK and is one of the smallest cars ever made in any quantity. It was made from the fall of 1963 to the end of 1964, with a total production of 80 Tridents. The body is made from fiberglass, with a clear Plexiglas bubble top, that serves as the roof and windshield and folds forward to open, allowing access. It could be had with either one or two seats and runs on 5” tires. It is powered by a 49 cc 4.2 hp DKWengie scooter engine coupled to a 3-speed transmission, (forward gears only), that gives the 330 lb car a top speed of 28 mph and prodigious gas mileage of 83 mpg. AVB-AMG
  19. @gleninjersey: God help them.... AVB-AMG
  20. @Rob0115: I had heard about CLEAR not too long ago and your post prompted my to investigate it further. Based on my airport travel destinations, I signed up for membership today in the CLEAR biometric identification program. Hopefully it will make my transit through these airports even faster and less of a hassle. I will finalize my enrollment at LAX when I arrive there early next week. This program takes the next step of the security intent, along with expediting the processing hassle of both the TSA PreCheck and Global Entry programs, which I appreciate. AVB-AMG
  21. @10X: You are correct. Global Entry includes all of the benefits of TSA PreCheck, while TSA PreCheck is just for domestic air travel. As a clarification TSA PreCheck speeds passengers through the required security physical screening process, while Global Entry speeds passengers through U.S. Border Control and Customs on flights arriving into the U.S. from foreign countries. FYI, one is only eligible to apply for TSA PreCheck if you are a U.S. citizen, national or resident, yet there is no age restriction. Almost all U.S. airlines participate in this program, as do many major foreign carriers. For Global Entry, one may apply if you are a U.S. citizen, U.S. permanent resident, or are a citizen of the United Kingdom, Germany, India, Panama, Columbia, Singapore, South Korea, Switzerland or Mexico. Some of these countries my require a visa. Canadian citizens and residents are also eligible for Global Entry benefits through membership in the NEXUS partnership program. The Netherlands has an arrangement for its citizens to enjoy the benefits of Global Entry, via its trusted traveler program called “FLUX”. Anyone under the age of 18 must have parental or legal guardian consent to participate. Your application to either program will most likely be denied if you've got a criminal record or provide false or incomplete information on your application. Also, if you are currently being investigated by any local, state, or federal agency or have pending criminal charge(s) or have violated customs, immigration, or agricultural laws in any country, you will probably be denied as well. Four years ago when I applied for and was approved for both programs, I did not fully understand all of this. At that time, I mistakenly thought that one was just for domestic travel and the other was for foreign travel. So, today, if one does both domestic AND foreign air travel, then Global Entry is really the one program to apply for and maintain, IMHO. AVB-AMG
  22. Since I do a fair amount of both domestic and foreign travel, I decided about four years ago to apply for participation in both TSA Pre and Global Entry programs. At that time, after filling out your personal information and submitting the completed applications online, the TSA Pre interview was conducted at a TSA Pre storefront in downtown Newark and the interview for Global Gateway was in Terminal B at Newark Inter'l. Airport. In a similar vein to having the E-ZPass electronic toll payment device, participating in either of these programs makes a lot of sense to save time. Having had both of these has, for the most part, reduced my waiting time in the lines for the security checks with metal detectors at U.S. airports. Yet with each passing year, with more and more people applying for and obtaining either TSA Pre or Global Entry, those lines seem to be growing to the point that many times it is as long, if not even longer than the regular security lines. I find that upon returning to the U.S. from a foreign country, (flying into JFK, EWR, LAX or Dulles), that the Global Entry lines are much shorter and hence faster, leading to the electronic passport scanner/reader kiosks, that really does speed up the customs review process. Global Entry recommends that their participants who plan to renew their membership, do so at least 6 months prior to the expiration date, just to take into account any back log and the usual vacation seasonal surge in applications. I renewed my GE in March and it took my just over 3 weeks to receive my new updated card. AVB-AMG
  23. Unfortunately, I will not be able to join all of you this weekend since my wife and I will be traveling down to Philadelphia to visit friends and relatives, including a trip to the relatively new Museum of the American Revolution. I was hoping to drop by both the Stafford Forge WMA and the Atlantic Shore Pines campground to meet up with you all, shoot some clays and to say hello, maybe even add some “spice” to the conversation. These type of get togethers are a great way to “humanize” everyone on this forum, providing face-to-face civil friendship. It looks like the weather will be favorable for shooting clays as well as the “breeze” afterwards. I hope that you all have a really enjoyable gathering, appreciating each other’s camaraderie and what I am sure will be delicious brisket, chili, burgers, dogs, etc, along with some good bourbon…. AVB-AMG
  24. @Handyman: Well, the majority of French people are not morons, but I do agree that the French certainly know how to produce wonderful wine. Tonight, my wife and I went out to a local restaurant and selected a very nice French Red Burgundy wine, (Pinot Noir), to accompany our dinner entrees. It was much more tanic than the CA or Washington State Pinot Noir's which usually taste rather "jammy" to me, nice but different. Also, due to the strength of the U.S. dollar compared to the Euro, European wines, French in particular, are much more reasonably priced and a good value right now. Why don't you go to your local wine store and purchase a bottle of French wine that they recommend, for $20 or less, to go with your Swanson's frozen TV dinner for your evening meal one night. I think you will find it quite enjoyable..... AVB-AMG
  25. As part of my self-interest and desire to learn more via continuing education regarding the arcane and confusing, (if not un-Constitutional), NJ gun laws, I have attended several conferences and presentations where Evan Nappen gave his interpretation of those constantly changing gun laws. I have also enrolled and subscribed to the US Law Shield program, for added insurance and peace-of-mind, for the potential pitfalls of gun ownership. I am not an attorney and realize that most of what Nappen advocates usually errors on the conservative side of caution, which I understand and accept. He is not always correct, (who is...?), but I respect his opinion and cautious approach to. NJ's gun laws. While it is a PITA, why take unnecessary chances when traveling with firearms, whether in NJ or other states. Until the SCOTUS makes more definitive rulings, I want to be prudent with my choices in how I plan to consciously comply with the current laws of NJ, as well as the other states I travel to. FYI, when I have gone on multiple state road trips with any of my firearms, I am knowledgeable of and have consciously abided by the current FOPA laws governing interstate transportation of firearms. Having obtained non-resident CCW permits for handguns from several states that allow me to CCW in approx. 32 states, I have on occasion, chosen to do so, where I was able to legally do so. I subscribed to a “belt and suspenders” approach when transporting my selected handgun and ammunition, through those states. For those trips, I made what I thought was a combined reasonable and practical decision to fully load the multiple magazines with hollow point bullets, as my self-defense ammo. If I was in a state where I was not legally allowed to wear my holstered handgun while driving or was not allowed to CCW at all, I would do the following. I would store the handgun and loaded magazines in separate 5.11 ballistic nylon zippered pouches that were each secured with small, TSA-approved combination locks. I then placed both separate locked pouches, along with my holster, inside a locked hard sided, (aluminum) attaché case, that in turn had two combination locks. I would then locate and store that locked hard sided case in the far back of my SUV. Finally, I would pull closed, the horizontal vinyl cover/shade, so that nothing stored in that cargo area would be visible to anyone inside or outside the vehicle, nor accessible to anyone within the vehicle while actively driving. Some folks would consider all of this as taking things overboard or being overly cautious. Well it is a PITA, but doing this and taking all of these precautions, gave me and gives me, peace-of-mind as I navigate through the mine field of different and conflicting legal jurisdictions of different states. AVB-AMG

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.